船舶推进同步电机PTI/PTO模式研究

PTI/PTO推进是最近发展起来的一种新型船舶推进方式,兼具传统柴油机推进和电力推进优点,可实现多种船舶工作模式,具有操控性好、安全、经济等特点,将是未来船舶推进方式发展方向之一.本文介绍了PTI/PTO推进模式理论和工作模式,便于理解该推进方式,希望有助于船舶推进技术的发展.     

硅胶吸附管采集甲醇汽车尾气排放中甲醇的方法研究

文章主要研究了利用硅胶吸附管采集甲醇汽车尾气排放中甲醇的方法,对硅胶吸附管的规格、待测样品的浓度、采样参数等进行了详细的讨论及验证。研究表明,利用硅胶吸附管采集甲醇的过程中,很容易发生甲醇的穿透。随着硅胶颗粒装填数目的增加,甲醇的穿透率降低,实际吸附甲醇的效率增加。在采样流量相同时,待测样品浓度越高,甲醇的穿透率越高。在待测样品浓度相同时,采集流量越高,甲醇的穿透率越高。将硅胶吸附管串联,可以有效减少甲醇的穿透,提高吸附效率。     

船舶小组立装焊作业单元CPS系统研究与应用

当前船厂小组立装焊作业过程存在作业任务信息无法直接传递至现场,现场实际执行的状态信息无法及时反馈等问题,导致装焊作业混乱、装焊效率低下.为了解决上述问题,针对船舶小组立装焊作业单元进行研究,构建基于信息物理融合(CPS)的智能制造系统.首先分析了小组立装焊作业流程;然后梳理了装焊作业任务数据,构建了小组立装焊作业数据模型,并在此基础上,完成了基于物联网的CPS框架设计以及系统功能开发,实现了对装焊作业过程的有效监控;最后将该系统应用于某船厂小组立装焊现场,有效规范了装焊作业过程,提高了装焊效率.     

Characteristics analysis for travel behavior of transportation hub passengers using mobile phone data

The travel behavior of passengers from the transportation hub within the city area is critical for travel demand analysis, security monitoring, and supporting traffic facilities designing. However, the traditional methods used to study the travel behavior of the passengers inside the city are time and labor consuming. The records of the cellular communication provide a potential huge data source for this study to follow the movement of passengers. This study focuses on the passengers’ travel behavior of the Hongqiao transportation hub in Shanghai, China, utilizing the mobile phone data. First, a systematic and novel method is presented to extract the trip information from the mobile phone data. Several key travel characteristics of passengers, including passengers traveling inside the city and between cities, are analyzed and compared. The results show that the proposed method is effective to obtain the travel trajectories of mobile phone users. Besides, the travel behavior of incity passengers and external passengers are quite different. Then, the correlation analysis of the passengers’ travel trajectories is provided to research the availability of the comprehensive area. Moreover, the results of the correlation analysis further indicate that the comprehensive area of the Hongqiao hub plays a relatively important role in passengers’ daily travel.

     

大跨度钢箱梁斜拉桥中跨合龙关键技术

以4座主跨超过400 m的钢箱梁斜拉桥中跨合龙控制为背景,对大跨度钢箱梁斜拉桥中跨合龙的2种方法进行对比分析,对合龙各主要工序的关键技术进行研究。提出了合龙段配切长度的计算公式和合龙口宽度连续观测的测点布置方式。建议:在调整好合龙口姿态后可不加压重,也可不采用临时劲性骨架锁定;采用无线采集设备采集合龙口结构的温度场,用激光测距仪测量合龙口宽度以提高观测效率和安全性;在悬臂施工阶段关注梁长累计误差并通过调整后续梁段的制造长度消除之。     

Hybrid process of fabricating high-quality micro wine-glass fused silica resonators

A new hybrid method, which combines improved glass-blown technology with wet etching, is reported to fabricate micro wine-glass resonators with high-quality fused silica. The optimum placement is compared to achieve the resonators with good shell shape. The typical shell diameter is about 4mm and its thickness covers from dozens to hundreds of micrometers. The etching rates in corrosion solutions with different ratios and at different thicknesses of hemispherical shells are studied. We also conclude how to precisely control the thickness. The corrosion solutions with different ratios of HF solution to NH₄F solution make the spherical shells rougher in different degrees. The best roughness is 0.581 nm in the 1: 8 ratio corrosion solution while the original roughness is 0.537 nm. This fact shows that the resonator remains atomically smooth surface. Based on the glassblowing spherical fused silica structure, the thickness of the resonator is effectively controlled by buffered oxide etch (BOE) technology according to the measured etching rate. The measured resonant frequency of the hemispherical shell at ambient pressure and room temperature is 1.75 kHz of rocking mode which is close to the simulated frequency. Using such a low-cost hybrid approach, we can fabricate high-quality microscale resonators in batch.     

高速路网不停车收费车道优化布设方法

合理设置高速公路收费站ETC (Electronic Toll Collection)车道数量，对高速公路通行效率至关重要。针对目前路网中ETC与MTC (Manual Toll Collection)车辆混行的情况，考虑ETC的普及率，结合多用户路网均衡模型和排队论方法，建立基于双层规划模型的高速路网ETC车道优化布设方法。上层模型以车辆总通行时间最小为目标，优化设置进出收费站的ETC车道数量；下层模型为多用户路网均衡模型，反映ETC和MTC车辆的路径和收费车道选择行为。下层模型通过设计收费站的等价拓扑结构，表征收费站的车道使用规则及车辆的收费车道选择行为，并采用排队论方法估计ETC和MTC车道的收费排队时间。根据模型的特点设计了基于主动集的启发式算法，利用参数二进制与拉格朗日函数法确定迭代下降方向，解决了下降方向与步长难以计算的问题；通过内嵌优化函数的方式，保证在主动集转化过程中上层约束均不会失效，且避免了迭代过程中的模型解退化问题。基于上海市绕城高速进行实证分析，结果表明：随着ETC普及率的提升，收费排队时长按照负指数趋势下降；与按比例布设ETC车道的方法相比，所提方法最高可降低57.4%的收费排队时间，且该方法可以避免ETC车道布设过多对于MTC车道通行能力挤压造成的负面效果。研究成果可以有效指导高速路网ETC车道的布设，提高路网通行效率。     

Impacts of urban built environment on empty taxi trips using limited geolocation data

This study identifies the determinants of the empty taxi trip duration (ETTD) by combining three high-resolution databases—geolocation data in New York City, geodatabase of urban planning data, and transportation facilities data. Considering the nature of duration data, hazard-based duration model is proposed to explore the relationships between causal factors and ETTD, coupling with three variations of baseline hazard distribution, i.e., Weibull distribution with heterogeneity, Weibull distribution, and log-logistic. Furthermore, the likelihood ratio test is presented to implement comparisons of three baseline hazard distributions, as well as spatial and temporal transferability of causal factors. The results show significant complementary effects by subway system and competitive effects by city bus and bicycling system, as well as significant impacts of trip length, airport trip, average annual income, and employment rate. Urban built environment, for instance, density of road, public facilities, and recreational sites and ratio of green space, has various impacts on ETTD. The elasticity estimations confirm significant spatial and temporal heterogeneity in impacts on ETTD. In addition, the analysis on elasticity also reveals the considerable impacts of severe traffic congestion on ETTD within Manhattan. The modeling can assist stakeholders in understanding empty taxi movements and measuring taxi system efficiency in urban areas.     

关于构建海上医疗救助制度的探讨

文中通过分析海上医疗救助与海上人命救助的区别,指出建立海上医疗救助制度的意义,并对建立此制度的途径进行了有益的探讨。