电动汽车半实物仿真测试平台(HUSTEVP)的研究和设计

阐述了电动汽车半实物仿真测试平台HUSTEVP的设计目标和要求。介绍了电动汽车半实物仿真测试平台HUSTEVP的系统设计，即该系统的结构和软硬件设计。在其硬件设计中，着重介绍了CAN总线通讯接口卡的选择、CAN节点设计与信号采集系统设计。最后，介绍了测试平台HUSTEVP的应用实例。     

重庆鹅公岩大桥东锚洞室防水堵漏工程浅谈

介绍应用水泥基渗透结晶型防水材料 (凯顿百森防水材料 )于地下结构混凝土的防水堵漏的工艺和施工 ,并有工程实例     

景观道路的设计实践——广阳岛环岛路设计

广阳岛环岛路的主要功能是服务性景观路,跟环岛滨江公园一起,共同构筑广阳岛的滨江景观带。尝试引进了国外的宁静化设计,尽可能推行最生态的工程做法,努力创造人与自然相和谐的环境,并竭尽全力地将这些构想付诸实施。为了实现以上目标,道路、交通、排水、结构、桥梁和电照专业,在景观专业的组织下,共同展开了这条景观路的设计尝试。     

船舶柴油机调速器有限转角力矩电机优化控制

本文针对新型的船舶柴油机调速器有限转角力矩电机控制系统优化与稳定性问题,在Matlab/Simulink中基于电枢回路方程与力矩方程搭建有限转角力矩电机动态系统模型.通过数据拟合方法构建电机非线性模型,基于线性控制理论对串级PID控制系统进行稳定性分析,最后使用遗传算法对PID参数进行优化设计.研究成果可为该电机用于柴油机电子调速执行机构提供优化及控制参考.     

Two degree of freedom flow-induced vibration of cylindrical structures in marine environments: frequency ratio effects

The flow-induced vibration of a cylindrical structure is a very common problem in marine environments such as undersea pipelines, offshore risers, and cables. In this study, the vortex-induced vibration (VIV) of an elastically mounted cylinder at a low Reynolds number is simulated by a transient coupled fluid–structure interaction numerical model. Considering VIV with low damping ratio, the response, hydrodynamic forces, and vortex shedding modes of the cylinder is systematically analyzed and summed up the universal rule under different frequency ratios. On the basis of the analysis, we find that the frequency ratio α is a very important parameter. It decides the locked-in, beat, and phase-switch phenomena of the cylinder, meanwhile, it also influence the vortex mode of the cylinder. The trajectory of the two degrees of freedom (2 DOF) case at different natural frequency ratios is discussed, with most trajectories having a “figure of 8” shape and a few having a “crescent” shape. A fast Fourier transformation technique is used to obtain the frequency characteristics of the vibration of the cylindrical structure. Using the 2 DOF cylinder model in place of the 1 DOF model presents several advantages in simulating the nonlinear characteristics of cylindrical structures, including the capacity to model the crosswise vibration generated by in-line vibration.     

Full Duplex Communications for Next Generation Cellular Networks: The Capacity Gain

Full duplex communication highly improves spectrum efficiency of a wireless communication link. However, when it is applied to a cellular network, the capacity gain from this technology remains unknown. The reason is that full duplex communication changes the aggregate interference experienced by each communication link in cellular networks. In this paper, the capacity gain from full duplex communication is studied for cellular networks of 4G and beyond, where the same frequency channel is adopted in each cell. A two-layer Poisson point process (PPP) is adopted to model the network topology, and stochastic geometry is employed to derive the coverage probability and the average capacity of typical link in a cellular network. On the basis of these derived parameters, the capacity gain from full duplex communication is determined. Numerical results reveal that without mutual interference cancellation (MIC), the capacity gain is small under various power levels; with perfect MIC at base stations, the capacity gain can exceed 60%; with imperfect MIC at base stations, the capacity gain decreases quickly even with a slight drop of MIC performance.     

中散公司信息化提升的新思路

通过分析中海散货运输有限公司当前在信息化方面取得的成绩和存在的问题,提出了信息化建设的新思路.阐述了企业信息化与精细化管理的相互推动作用,提出提高企业信息化水平成就精细化管理企业的必然趋势.     

大倾角中厚煤层软弱顶底板柔性护巷技术

在大倾角中厚煤层沿空留巷中,以往的支护方式难以满足大倾角中厚煤层巷道特殊的围岩结构稳定的需要,同时无法适应工作面内矸石垮落造成留巷困难。文章针对这一难题,首次提出并采用了"柔性护巷"技术,通过利用巷道上帮形成的由垮落矸石堆积在特制钢筋网上的"包护带",允许巷道顶板有一定的下沉量,从而使矸石充分为巷道顶板组合岩梁结构提供支撑力。在总结其施工工艺的基础上,通过现场试验,研究了巷道矿压显现规律、顶板移动规律、矸石垮落堆积规律和钢筋网变形规律;实验结果表明,在利用锚、网、索、支柱联合支护的基础上,应用"柔性护巷"技术能有效地解决大倾角中厚煤层沿空留巷技术难题。     

道路交通事故清障救援装备专用作业装置测试与评价

针对道路交通事故综合救援装备专用作业装置存在功能不匹配、性能适应性差等问题,参照《清障车》(QC/T 645)和《道路车辆清障救援操作规范》(JT/T 891),提出了道路交通事故清障救援装备专用作业装置的测试与评价方法。并在此基础上,以某型道路交通事故综合救援装备为例,分别选取空载、额定载荷、超载、侧绞盘载荷、托臂载荷、扶正等系列工况测评。验证结果表明:该型道路交通事故综合救援装备的功能和性能均合格。     

Hybrid process of fabricating high-quality micro wine-glass fused silica resonators

A new hybrid method, which combines improved glass-blown technology with wet etching, is reported to fabricate micro wine-glass resonators with high-quality fused silica. The optimum placement is compared to achieve the resonators with good shell shape. The typical shell diameter is about 4mm and its thickness covers from dozens to hundreds of micrometers. The etching rates in corrosion solutions with different ratios and at different thicknesses of hemispherical shells are studied. We also conclude how to precisely control the thickness. The corrosion solutions with different ratios of HF solution to NH₄F solution make the spherical shells rougher in different degrees. The best roughness is 0.581 nm in the 1: 8 ratio corrosion solution while the original roughness is 0.537 nm. This fact shows that the resonator remains atomically smooth surface. Based on the glassblowing spherical fused silica structure, the thickness of the resonator is effectively controlled by buffered oxide etch (BOE) technology according to the measured etching rate. The measured resonant frequency of the hemispherical shell at ambient pressure and room temperature is 1.75 kHz of rocking mode which is close to the simulated frequency. Using such a low-cost hybrid approach, we can fabricate high-quality microscale resonators in batch.