重庆鹅公岩大桥东锚洞室防水堵漏工程浅谈

介绍应用水泥基渗透结晶型防水材料 (凯顿百森防水材料 )于地下结构混凝土的防水堵漏的工艺和施工 ,并有工程实例     

水泥稳定废旧沥青混合料路用性能试验研究

通过系统的室内试验对水泥稳定废旧沥青混合料的物理力学特性进行了分析评定,内容包括无侧限抗压强度、抗压回弹模量、劈裂强度以及耐久性等;初步确定了原材料评价方法,并在此基础上探讨了原材料性质对再生混合料路用技术性能的影响。本文所提出的材料设计参数及相关研究成果,可以供设计、生产和制定规范时参考。     

大跨径混凝土桥梁施工挠度监测数据采集的自动化方案

针对大跨径预应力混凝土桥梁施工挠度监测中数据采集工作量大的特点。提出了利用PC-E500电子记簿采集外业数据。利用Delphi语言编程将数据导入Excel表格并从Excel表格中提取数据的自动化方案。     

主动悬架系统对汽车侧翻稳定性改善分析

针对被动悬架系统侧翻稳定性比较差的问题,提出采用主动悬架系统的方法进行改善。通过汽车侧倾运动状态分析,建立了被动悬架系统、主动悬架系统和控制系统模型。模拟分析得到主动悬架系统使得汽车在弯道行驶时的侧倾角有效值下降了92.8%,侧倾角加速度有效值下降了78.2%,侧翻因子有效值下降了92.6%。结果表明:利用主动悬架系统可以有效地降低汽车非直线行驶时的侧倾角以及侧倾角加速度,提高汽车的侧翻稳定性,是提高汽车非直线行驶状态下安全性的一个合理的解决方案。     

全风化花岗岩动强度特性研究

采用动三轴试验研究了全风化花岗岩的动强度和动模量,分析了动强度和动模量的影响因素.     

重庆菜园坝长江大桥立交工程设计特点及关键技术

重庆菜园长江大桥立交工程包括菜园坝立交和苏家坝立交,本文着重介绍在众多制约因素的前提下,2个立交工程的设计特点和设计关键技术.     

景观道路的设计实践——广阳岛环岛路设计

广阳岛环岛路的主要功能是服务性景观路,跟环岛滨江公园一起,共同构筑广阳岛的滨江景观带。尝试引进了国外的宁静化设计,尽可能推行最生态的工程做法,努力创造人与自然相和谐的环境,并竭尽全力地将这些构想付诸实施。为了实现以上目标,道路、交通、排水、结构、桥梁和电照专业,在景观专业的组织下,共同展开了这条景观路的设计尝试。     

船舶柴油机调速器有限转角力矩电机优化控制

本文针对新型的船舶柴油机调速器有限转角力矩电机控制系统优化与稳定性问题,在Matlab/Simulink中基于电枢回路方程与力矩方程搭建有限转角力矩电机动态系统模型.通过数据拟合方法构建电机非线性模型,基于线性控制理论对串级PID控制系统进行稳定性分析,最后使用遗传算法对PID参数进行优化设计.研究成果可为该电机用于柴油机电子调速执行机构提供优化及控制参考.     

Two degree of freedom flow-induced vibration of cylindrical structures in marine environments: frequency ratio effects

The flow-induced vibration of a cylindrical structure is a very common problem in marine environments such as undersea pipelines, offshore risers, and cables. In this study, the vortex-induced vibration (VIV) of an elastically mounted cylinder at a low Reynolds number is simulated by a transient coupled fluid–structure interaction numerical model. Considering VIV with low damping ratio, the response, hydrodynamic forces, and vortex shedding modes of the cylinder is systematically analyzed and summed up the universal rule under different frequency ratios. On the basis of the analysis, we find that the frequency ratio α is a very important parameter. It decides the locked-in, beat, and phase-switch phenomena of the cylinder, meanwhile, it also influence the vortex mode of the cylinder. The trajectory of the two degrees of freedom (2 DOF) case at different natural frequency ratios is discussed, with most trajectories having a “figure of 8” shape and a few having a “crescent” shape. A fast Fourier transformation technique is used to obtain the frequency characteristics of the vibration of the cylindrical structure. Using the 2 DOF cylinder model in place of the 1 DOF model presents several advantages in simulating the nonlinear characteristics of cylindrical structures, including the capacity to model the crosswise vibration generated by in-line vibration.     

Full Duplex Communications for Next Generation Cellular Networks: The Capacity Gain

Full duplex communication highly improves spectrum efficiency of a wireless communication link. However, when it is applied to a cellular network, the capacity gain from this technology remains unknown. The reason is that full duplex communication changes the aggregate interference experienced by each communication link in cellular networks. In this paper, the capacity gain from full duplex communication is studied for cellular networks of 4G and beyond, where the same frequency channel is adopted in each cell. A two-layer Poisson point process (PPP) is adopted to model the network topology, and stochastic geometry is employed to derive the coverage probability and the average capacity of typical link in a cellular network. On the basis of these derived parameters, the capacity gain from full duplex communication is determined. Numerical results reveal that without mutual interference cancellation (MIC), the capacity gain is small under various power levels; with perfect MIC at base stations, the capacity gain can exceed 60%; with imperfect MIC at base stations, the capacity gain decreases quickly even with a slight drop of MIC performance.