中速三体船型PCC的可行性研究(英文)

In the present paper, a new trimaran Pure Car Carrier (PCC) is proposed and a feasibility study on the ship is carried out. In this study, first, the effective horse power (EHP)/car of the PCC running in still water is predicted. By comparing the predicted EHP/car with that of a conventional mono-hull PCC, it is found that the trimaran PCC is superior to the conventional mono-hull PCC at rather higher speed. As ship speed increases, the reduction of the resistance of the trimaran is bigger. It is also found that at common service speed of PCCs, the EHP/car of a small PCC is lower than that of a conventional PCC. Secondly, the optimal L/B of a main-hull of the trimaran PCC in still water is determined. The optimal L/B of the main-hull varies with ship speed and size because the wave resistance decreases but the frictional resistance increases as L/B of the hull increases. As ship size increases, the optimal L/B of the main-hull of the trimaran PCC decreases.     

流场中任意厚度阻尼复合圆柱壳的声辐射(英文)

The insertion loss of acoustic radiation of damped cylindrical shell described by 3-D elasticity Navier equations under radial harmonic applied load in fluid is presented. The classical integral transform technique, potential theory and Lamè resolution are used to derive the solutions of Navier equations. The higher precision inversion computation is introduced to solve the linear equations. Comparing with acoustic radiation of one-layer cylindrical shell, the influence of thickness, mass density, dilatational wave loss factor and Young's modulus of damping material and circumferential mode number of the cylindrical shell on the insertion loss is concluded. The theoretical model in the paper can be used to deal with the arbitrary thickness and any frequency of the coated layer in dynamic problem. The conclusions may be of theoretical reference to the application of damping material to noise and vibration control of submarines and underwater pipes.     

S^2 BHCA Multiple AUVs cooperation oriented control architecture

Oceanographic survey, or other similar applications should be the applications of multiple AUVs. In this paper, the skill ＆ simulation based hybrid control architecture （S^2BHCA） as the controller＇s design reference was proposed. It is a multi-robot cooperation oriented intelligent control architecture based on hybrid ideas. The S^2BHCA attempts to incorporate the virtues of the reactive controller and of the deliberative controller by introducing the concept of the ＂skill＂. The additional online task simulation ability for cooperation is supported, too. As an application, a multiple AUV control system was developed with three ＂skills＂ for the MCM mission including two different cooperative tasks. The simulation and the sea trials show that simple task expression, fast reaction and better cooperation support can be achieved by realizing the AUV controller based on the S^2BHCA.     

Market based framework for multiple AUVs cooperation

A“Market” based framework for multiple AUVs team is introduced in this paper. It is a distributed meta-level task allocation framwork. The formulation and the basic concepts of the “Market” such as “goods” and “price” are discussed first, then the basic algorithm of the “auction”. The loosely coupled v-MDTSP tasks are considered as an example of the task allocation mission. A multiple AUV team controller and a detailed algorithm are developed for such applications. The simulation results show that the controller has the advantages such as robustness and low complexity and it can achieve better optimization results than the classical central controller （ such as GA） in some tasks. And the comparison of two different local solvers also implies that we should get the reasonable task allocation even not using the high quality algorithm, which can considerably decrease the cooperation computation.     

Application of large eddy simulation in the performance study of wave blocker

The configuration and aerodynamic performance of the inlet system are important aspects in the process of installing a gas turbine on a naval vessel. Under the requirements, large eddy simulation （LES） is used to simulate the three-dimensional fluid flow in the wave blocker of a marine inlet filter. The Smagorinsky-Lilly sub-grid model was used to model motions of small-scale structures. During numerical simulation, the SIMPLE algorithm was applied. The central-differencing spatial discretization scheme and the second order accuracy finite difference for the temporal discretization were used. Simulation gives satisfactory distribution of the vorticity fields and turbulent kinetic energy. Compared with the k-ε turbulent model, the results of LES are better for the distribution of parameters. The results of experimental study in a small-scale wind tunnel indicate that numerical calculation has higher accuracy. Therefore, the methods used are worthy of reference and introduction for the design of an inlet system.     

Large-eddy simulation of cross-flow around ship sections

The present work is motivated by phenomena occurring in the flow field around ship-like bodies with an incoming lateral flow (cross-flow, 90 ° drift angle). Three-dimensional unsteady flows around different ship sections are investigated by using computational fluid dynamic (CFD) tools with large-eddy simulation (LES) subgrid-scale turbulence model. The simulation results are compared to measurements at several Reynolds numbers in the 90–200,000 range. Focus in our investigation is on the characterization of the motion of vortex structures generated by the separated flow. Another target in the study is to obtain better knowledge of the hydrodynamic forces acting on the sections. Computed pressure and drag coefficients are compared with experimental measurements. The comparison between simulations and measurements shows that an LES model can predict the flow field around ship sections in detail and the hydrodynamic forces acting on the sections.     

Simulation of hydrodynamic performance of drag and double reverse propeller podded propulsors

The unsteady performance of drag and double reverse propeller podded propulsors in open water was numerically simulated using a computational fluid dynamics (CFD) method. A moving mesh method was used to more realistically simulate propulsor working conditions, and the thrust, torque, and lateral force coefficients of both propulsors were compared and analyzed. Forces acting on different parts of the propulsors along with the flow field distribution of steady and unsteady results at different advance coefficients were compared. Moreover, the change of the lateral force and the difference between the abovementioned two methods were mainly analyzed. It was shown that the thrust and torque results of both methods were similar, with the lateral force results having the highest deviation     

Epistemic-based investigation of the probability of hazard scenarios using Bayesian network for the lifting operation of floating objects

Owing to the increase in unprecedented accidents with new root causes in almost all operational areas, the importance of risk management has dramatically risen. Risk assessment, one of the most significant aspects of risk management, has a substantial impact on the system-safety level of organizations, industries, and operations. If the causes of all kinds of failure and the interactions between them are considered, effective risk assessment can be highly accurate. A combination of traditional risk assessment approaches and modern scientific probability methods can help in realizing better quantitative risk assessment methods. Most researchers face the problem of minimal field data with respect to the probability and frequency of each failure. Because of this limitation in the availability of epistemic knowledge, it is important to conduct epistemic estimations by applying the Bayesian theory for identifying plausible outcomes. In this paper, we propose an algorithm and demonstrate its application in a case study for a light-weight lifting operation in the Persian Gulf of Iran. First, we identify potential accident scenarios and present them in an event tree format. Next, excluding human error, we use the event tree to roughly estimate the prior probability of other hazard-promoting factors using a minimal amount of field data. We then use the Success Likelihood Index Method (SLIM) to calculate the probability of human error. On the basis of the proposed event tree, we use the Bayesian network of the provided scenarios to compensate for the lack of data. Finally, we determine the resulting probability of each event based on its evidence in the epistemic estimation format by building on two Bayesian network types: the probability of hazard promotion factors and the Bayesian theory. The study results indicate that despite the lack of available information on the operation of floating objects, a satisfactory result can be achieved using epistemic data.     

Evaluating the impact of PSC inspectors’ professional profile: a case study of the Spanish Maritime Administration

Full-scale globalisation of trade has been accompanied by a progressive liberalisation of maritime transport. The proliferation of open registries has created a situation in which Port State Control (PSC) has become much more effective than the feeble or non-existent control exercised by those States. This study has been conducted on the influence of the professional profile of inspectors on inspection results. The objective of our paper was to evaluate the impact of PSC inspectors’ professional profile by conducting a case study of the Spanish Maritime Administration. The paper concludes with a discussion of the correlation between deficiencies detected and professional profiles.