A Study in Port Planning: The Example of Mina Zayed

The correct number of berths that a port should provide is solved by a model which minimizes the total port usage cost in terms of the costs of berth provision and the costs accruing to ships from time spent in the port. This model is then applied to Mina Zayed in the Arabian Gulf as an aid to future planning, and from different sets of cargo forecasts an optimal stategy is derived using a game-theoretic approach.     

The construction and use of continuous autoregressive models for traffic indices

This article discusses the use of continuous autoregressive models to describe the behavior of traffic indices. From discretely sampled data, second-order differential equation models are constructed to represent dynamic traffic fluctuations as the response of a linear system to a stochastic forcing function. The results are compared to the more common M/G/∞ queueing model approach, and the analysis is demonstrated on time series of aircraft concentration in thirty-one enroute air traffic control sectors.     

Exhaust emissions and its control methods in compression ignition engines: A review

Extensive usage of automobiles has certain disadvantages and one of them is its negative effect on environment. Carbon dioxide (CO₂), carbon monoxide (CO), hydrocarbons (HC), oxides of nitrogen (NO_x), sulphur dioxide (SO₂) and particulate matter (PM) come out as harmful products during incomplete combustion from internal combustion (IC) engines. As these substances affect human health, regulatory bodies impose increasingly stringent restrictions on the level of emissions coming out from IC engines. This trend suggests the urgent need for the investigation of all aspects relevant to emissions. It is required to modify existing engine technologies and to develop a better after-treatment system to achieve the upcoming emission norms. Diesel engines are generally preferred over gasoline engines due to their undisputed benefit of fuel economy and higher torque output. However, diesel engines produce higher emissions, particularly NO_x and PM. Aftertreatment systems are costly and occupy more space, hence, in-cylinder solutions are preferred in reducing emissions. Exhaust gas recirculation (EGR) technology has been utilized previously to reduce NO_x. Though it is quite successful for small engines, problem persists with large bore engines and with high rate of EGR. EGR helps in reducing NO_x, but increases particulate emissions and fuel consumption. Many in-cylinder solutions such as lower compression ratios, modified injection characteristics, improved air intake system etc. are required along with EGR to accomplish the future emission norms. Modern combustion techniques such as low temperature combustion (LTC), homogeneous charge compression ignition (HCCI), premixed charge compression ignition (PCCI) etc. would be helpful for reducing the exhaust emissions and improving the engine performance. However, controlling of autoignition timing and achieving wider operating range are the major challenges with these techniques. A comprehensive review of diesel engine performance and emission characteristics is given in this paper.     

A model of the travel to work limits of parents

This paper considers the length of time that parents are willing to travel to an existing or new job. Using data for over 12,000 parents it finds that many characteristics were associated with being less likely to be willing to travel to work for at least an hour (roundtrip). These include: being a women, those out of work, having children under 5, being a lone parent and using formal childcare. Professionals and associate professions were more willing to travel for longer periods. In terms of location, those in accessible small towns and rural areas were willing to travel more than those in larger urban areas and those in remote rural areas willing to travel most. Policy implications are also set out.     

Application of the reverse 3D scanning method to evaluate the wear of forging tools divided on two selected areas

This study is focused on tools used in the industrial hot forging process of a front wheel forging (eventually–gear wheel) manufactured for the automotive industry. Four different variants were applied for the tools: 2 die inserts were coated with two different hybrid layers (GN + PVD type), i.e. AlCrTiN and AlCrTiSiN, one insert was only nitrided, and one was pad welded, to improve tool durability. The tool wear was analysed and represented by the material degradation on the working surface, based on the 3D scanning and the material growth of the periodically collected forgings. Additionally, the scanned tools were divided into two areas, in which it was found, based on the reliminary analysis, that various degradation mechanisms are predominant. Microstructural and hardness measurements of the analyzed tools were also performed. Based on the results, it was found that, in the central part of the die insert (area A), thermo-mechanical fatigue and wear occurred, while in the area of the bridge insert (area B), only abrasive wear could be observed. For these areas (A and B), the loss of material was determined separately. In area A for the inserts with hybrid layer GN+AlCrTiSiN and gas nitrided, an intensive increase of wear took place, which was not observed for the pad welded and GN+AlCrTiN layer insert, for which, together with the increase of the forging number, a proportional growth of the loss of material occurred. In area B the weakest results were obtained for the insert with GN+AlCrTiSiN layer, while wear of other die inserts grew similar and proportional.     

Finite element modeling of hydrostatic stress distribution in copper dual-damascene interconnects

Hydrostatic stresses of copper dual-damascene interconnects are calculated by a commercial finite element software in this paper. The analytical work is performed to examine the effects of different low-k (k is permittivity) dielectrics, barrier layer and aspect ratio of via on hydrostatic stress distribution in the copper interconnects. The results of calculation indicate that the hydrostatic stresses are highly non-uniform throughout the copper interconnects and the highest tensile hydrostatic stress exists on the top interface of lower level interconnect near via. Both the high coefficient of thermal expansion and the low elastic modulus of the low-k dielectrics and barrier layer can decrease the highest hydrostatic stress on the top interface, which can improve the reliability of the copper interconnects.     

Lightweight mixture faults detection method for gasoline engine using on-line trend analysis

Mixture faults detection is meaningful for gasoline engines because proper mixture is the basic prerequisite for healthy running of a combustion engine. Among existing methods for faults detection, the data-driven trend analysis technique is widely used due to the simplicity and efficiency in time-domain. The CUSUM (Cumulative Sum Of Errors) algorithm is good at real-time trend extraction, but it’s easy to be costly on the fuel trim signal during the engine in normal working conditions, which will increase battery energy consumption because engine failure is rarely occurs. Hence, the conventional treatment methods of artifacts in the CUSUM algorithm are modified by means of decay function and detection time analysis. The thresholds are tuned according to the characteristics of artifacts instead of residual variability, which leads to better results of trend extraction and less computation. Then, the revised CUSUM algorithm is used for monitoring the mixture abnormal behaviors, and the mixture faults can be detected in real time through analyzing the variation features of fuel trim signal. The lightweight faults detector using the advanced CUSUM algorithm (FD-A-CUSUM) is evaluated on the experimental data collected from a Ford engine. The validation results show that while engine works under normal conditions, the computation of FD-A-CUSUM has decreased by 72.79 % in comparison with the detection method using the original CUSUM algorithm (FD-O-CUSUM), and the false alarm ratio of FD-A-CUSUM is 3.37 %. Futhermore, the detection results of FD-A-CUSUM for two leakage faults have achieved 91.18 % test accuracy.     

美国拉臂钩技术发展及应用现状

我叫大卫·泽洛斯特里克,是斯泰勒工业有限公司的董事长.斯泰勒工业有限公司是美国第一家拉臂钩制造商,成立于1990年,座落于美国爱荷华州的加纳区.