Electrically Assisted Internal Combustion Engines: A Comparative Analysis

An electrically assisted internal combustion engine is obtained by combining a conventional engine and one or more electrical motors of considerably smaller size. A key feature of such an innovative vehicle hybridization approach is that the torque generated by electric machines is not transmitted to the wheels. The electric motors are, in fact, intended only to assist the internal combustion engine in low efficiency, low performance, or high polluting working conditions. They however, draw extra power and energy from the battery. This paper presents a tool to evaluate different possible solutions in terms of energy balance, efficiency, battery stress and battery ageing. The method, which is based on suitable mathematical models and specific analysis criteria is also exploited to compare eight different configurations of a C-segment vehicle, pointing out limits and capabilities of traditional 12?14 V systems.     

Development of hydrogen-compressed natural gas blend engine for heavy duty vehicles

Natural gas fuel, as an alternative energy source of transportation, has been used widely since it has an advantage of low emission levels. However, new technologies are required in order to meet the reinforced emission regulations. For this purpose, research into the development of hydrogen-compressed natural gas (HCNG) blend engine was carried out to evaluate its feasibility and emission characteristics. The Engine Research Department at the Korea Institute of Machinery and Materials carried out a large number of tests based on various parameter changes that could affect the performance and emission of HCNG engine in different operating conditions. An earlier stage of the research project focused on the lean combustion of a HCNG engine for heavy duty vehicles to meet the EURO-VI standards. An 11-L/6-cylinder CNG engine was used for the test. The effects of the excess air ratio change were assessed based on various content ratios of hydrogen in the natural gas fuel. In the later part of the HCNG research, a stoichiometric mixture operation was suggested to meet reinforced emission regulation without requiring a De-NOx system. Additionally, an exhaust gas recirculation (EGR) system was introduced for the purpose of improving thermal efficiency and durability. The optimal operating conditions were selected to achieve the best thermal efficiency to meet the required emission levels. In this paper, we demonstrate that a HCNG engine can achieve a significant decrease in NOx emissions, as compared to that of a CNG engine, while meeting the requirements of the EURO-VI standards during a transient mode cycle test. EGR can suppress the weakness of stoichiometric mixture combustion strategy, such as the deterioration of the durability and thermal efficiency, while the emission level can be lowered with the use of a three-way catalyst. The possibility of further reduction of emissions and CO2 with EGR was evaluated to access practical application of a HCNG engine in the field. From that evaluation, the HCNG engine with stoichiometric mixture operation for heavy duty vehicles was developed. The emission levels of HCNG engine were 50 % lower when compared to the EURO-VI standards with a greater than 10 % decrease in CO₂ compared to that of a natural gas engine.     

Grid convergence study in the resistance calculation of a trimaran

As a new type of hull form, trimaran has remarkable excellent performances and has drawn more and more attention. When the viscous CFD technology now available is applied to the research of resistance performance of trimaran, the spatial discretization would usually result in the grid error and uncertainty, and thus the considerable discrepancy between the numerical results and the experimental data. In order to ascertain how much the grid would affect the calculation, the grid convergence should be studied. A mathematical trimaran was chosen as an example, with the commercial code CFX for the simulation, VOF for surface treatment, and the grid study was carried out based on two different turbulence models. It was concluded that carrying out grid study is helpful in estimating the grid error and uncertainty, and indicating the direction of improving the credibility of the numerical calculation, and, in addition to grid errors and uncertainties, the turbulence modeling errors and uncertainties contribute to the simulation errors.     

Lagrangian modelling of plankton motion: From deceptively simple random walks to Fokker–Planck and back again

The movement of plankton, either by turbulent mixing or their own inherent motility, can be simulated in a Lagrangian framework as a random walk. Validation of random walk simulations is essential. There is a continuum of mathematically valid stochastic integration schemes upon which random walk simulations depend, each of which lead to radically different macro-scale dynamics as expressed in their corresponding Fokker–Planck equations. In addition, diffusivity is not a unique parameter describing a random walk and its corresponding Fokker–Planck equation. Spatially varying translation speed and turn frequency have different effects on population distributions. Validation requires extra information either in the form of the well-mixed condition for physical diffusion, or in detailed information on the sensing ability, internal state modulation and swimming response for plankton motility.     

Theoretical and experimental analysis of a CNG cylinder rack connection to a bus roof

From our perspective, a global technology development should be focused on resolving the issues of environmental impact and conservation of available natural energy resources. New technological solutions and alternative fuels, such as Compressed Natural Gas (CNG), have increasingly more application for modern engines and vehicles. If we take into account the situation in city transport, where primarily vehicles with diesel engines are used, a strategic proposal is to begin by retrofitting these into bi-fuel or dedicated Natural Gas Vehicles (NGVs). This paper analyzes the retrofit of a diesel bus into dedicated NGV. To confirm the safety of the vehicle in city transport, we addressed the problem of mounting a gas rack with CNG cylinders on the roof of a retrofitted city bus, according to UN ECE Regulation No. 110. This assembly is the most critical part of the retrofitted bus because of the concentration of stress due to increased mass and the application of a specific installation for supply of CNG from the cylinders to the engine. These regulations must be met in all parts of the vehicle, but we only focused on those areas affected by the retrofit to NGV.     

Quantifying individuals’ trade-offs between privacy,liberty and security: The case of rail travel in UK

Public transport systems have been targets in several terrorist attacks, notably in recent years, resulting in tight security measures worldwide. However, individuals’ privacy and liberty often conflict with efforts towards safety and security, making it difficult to assess the implications of security measures balanced against the costs (e.g., citizens may be stopped, searched and asked to provide personal identification data to authorities without any particular reason). Henceforth, our research question asks, “to what extent would people sacrifice their right to privacy and liberty in exchange for potentially safer and more secure travel?” This paper uses a stated choice experiment to quantify individuals’ trade-offs between privacy and security within a real-life context, namely rail travel in the UK. Using a nationwide sample, the empirical analysis yields the importance of improvements in the security infrastructure and identifies areas of concern with regard to privacy and liberty controlling for travel related factors. Further, trade-offs across different security measures for rail travel are quantified in terms of individuals’ willingness-to-pay extra on top of the average ticket price.     

船体表面矩形块优化敷设设计(英文)

Rectangular tiles can be laid on a ship’s hull for protection, but the sides of the tiles must be adjusted so adjacent tiles will conform to the curvature of the hull. A method for laying tiles along a reference line was proposed, and an allowable range of displacement for the four vertices of the tile was determined. Deformations of each tile on a specific reference line were then obtained. It was found that the least deformation was required when the tiles were laid parallel to a line with the least curvature. After calculating the mean curvature on the surface, the surface was divided into three layout areas. A set of discrete points following the least deformation of the principal curvatures was obtained. A NURBS interpolation curve was then plotted as the reference line for laying tiles. The optimum size of the tiles was obtained, given the allowable maximum deformation condition. This minimized the number of bolts and the amount of stuffing. A typical aft hull section was selected and divided into three layout areas based on the distribution of curvature. The optimum sizes of rectangular tiles were obtained for every layout area and they were then laid on the surface. In this way the layout of the rectangular tiles could be plotted.     

Getting by with a little help from my friends…and family: immigrants and carpooling

While much of the scholarly literature on immigrants’ travel focuses on transit use, the newest arrivals to the United States make over twelve times as many trips by carpool as by transit. Using the 2001 National Household Travel Survey and multinomial logit mode choice models, we examine the determinants of carpooling. In particular, we focus on the likelihood of carpooling among immigrants—carpooling both within and across households. After controlling for relevant determinants of carpooling, we find that immigrants are far more likely to form household carpools than native-born adults and also are more likely than the native-born to form external carpools (outside the household). Moreover, when faced with the options of carpooling and public transit, immigrants—even recent arrivals—appear to prefer carpools over transit more strongly than the native born.     

Long-term behavior of particulate matters at urban roadside and background locations in Seoul,Korea

The concentrations of particulate matter, PM_2.5, PM₁₀, and TSP at an urban roadside and an urban background station are analyzed. Data collected over a 10 year period are analyzed. The concentrations of the particulates measured at the urban site are systematically larger than at the background station. The mean PM values at the former also exhibit a slight fall over the decade unlike those at the background station. Overall, the particulate matters at both locations are in an intermediate range of global level, e.g., approximately two times lower than those in other Asian regions but higher than in Europe.