A review of the Effect of α/W ratio on fracture toughness （Ⅱ） experimental investigation in LEFM

In part I of this series, experimental investigation in EPFM （elastic-plastic fracture mechanics） had been discussed. In this paper, experimental investigation in LEFM （ linear elastic fracture mechanics） is given. Fracture toughness tests had been carried out on three different strength steels, using both through-cracked specimens with different α/W ratio and semi-elliptical cracked specimens with variable crack size and shape. Results show that the fracture toughness KIC increases with decreasing α/W when α/W 〈 0.3 for three-point-bend specimens, and that for α/W 〉 0.3, it is independent of α/W. Shallow crack specimens, both through-cracked and surface-cracked, gave markedly higher values than deeply notched specimens. However, the effect of crack shape on fracture toughness is negligible. Results also show that the LEFM approach to fracture is not tenable for design stresses where αc is often very small, far less than 2.5 （ KIC/σy）^2.     

Hybrid Electric Drive for DDG-51 Class Destroyers

The first of the Arleigh Burke class destroyers is nearing its mid-life. This class of ships was designed during the late 1970s through the 1980s to meet the threats that were prevalent at that time. Since entering service in 1991, these ships have shown themselves to be extremely versatile and the class now consists of nearly 60 ships in service. Their combat systems have been continually upgraded and adapted to meet the new threats the United States faces today. However, in order to keep these platforms viable throughout the first half of the 21st century, their operating costs must be reduced. Manpower, maintenance, and fuel are three of the top operating cost drivers. Most surface combatants spend very little of their underway time operating at full speed or even close to that. Over 1/3 of their underway time is spent at 12 knots and under. This is less than half of their maximum speed and only a fraction of the maximum power owing to the cubic speed–power relationship. Although the existing mechanical drive system is reasonably efficient, the main gas turbines are extremely inefficient at these very low power levels. A shaft-mounted auxiliary electric propulsion system (EPS) can take advantage of excess capacity in the ship service generators to reduce the main engine operating hours. Enabling bi-directional power flow from this auxiliary electric drive will provide additional generation capacity for ship service loads at a modest additional cost. It also provides a "cross-connect" capability from one shaft to the other. This paper will explore one prospect for reducing the operating cost of the DDG-51 class of ships by installing an auxiliary EPS that would powered by the ship service electrical plant. This additional system would serve to reduce both underway fuel usage as well as maintenance on the gas turbine main engines by reducing the number of operating hours on each engine. We will examine the technology trade-offs in this ongoing study.     

Micro-Grinding Performance of Hard-Brittle Chip Materials in Precision Micro-Grinding Microgroove

The micro-structure on hard-brittle chip materials (HBCMs) surface can produce predominant functions and features. The micro-grinding with diamond wheel micro-tip is an efficient method to machine microstructure on HBCMs. However, different HBCMs and crystal orientation may have a significant influence on the micro-grinding performance. In this paper, the micro-grinding performance along different crystal orientation of HBCMs is investigated. First, a dressed 600^# diamond grinding wheel is used to micro-grind micro-structure on HBCMs. Then, the experiment of micro-grinding force test is completed. Finally, the quality of microgroove, the grinding ratio and the micro-grinding force are investigated and they are related to the crystal orientation of HBCMs. It is shown that the stronger resistance to the micro-crack propagation has the best quality of microgroove and the smallest grinding ratio. Moreover, the hardest single-crystal SiC has the best machinability and the micro-grinding force is 38.9%, 10.8% and 46.8% less than the one of sapphire, single-crystal Si and quartz glass, respectively. The direction to micro-grind easily is the crystal orientation 〈10\(\overline 1 \)0〉 for single-crystal SiC and sapphire. In addition, the micro-grinding force increases with the increase of the micro-grinding depth and feed rate and decreases with the increase of the grinding wheel speed.     

Lattice-based group signature with verifier-local revocation

Among several post quantum primitives proposed in the past few decades, lattice-based cryptography is considered as the most promising one, due to its underlying rich combinatorial structure, and the worst-case to average-case reductions. The first lattice-based group signature scheme with verifier-local revocation(VLR) is treated as the first quantum-resistant scheme supported member revocation, and was put forward by Langlois et al. This VLR group signature(VLR-GS) has group public key size of O(nm log N log q), and a signature size of O(tm log N log q log β). Nguyen et al. constructed a simple efficient group signature from lattice, with significant advantages in bit-size of both the group public key and the signature. Based on their work, we present a VLR-GS scheme with group public key size of O(nm log q) and signature size of O(tm log q). Our group signature has notable advantages: support of membership revocation, and short in both the public key size and the signature size.     

地铁车辆制动电子控制单元试验台

介绍了地铁车辆制动系统的制动电子控制单元(BECU)试验台的构成、工作原理、主要功能及性能参数等,详细说明了数据采集、处理和控制等子系统。试验结果证明,该试验台实际操作易于上手,人机交互界面直观,运行可靠,完全能满足实际的测试需求。在对BECU测试过程中,该试验台能够精确进行各种信号模拟,完成气动等各种试验,还可用于模拟地铁车辆制动工况下对电子控制单元进行检测与辅助设计等。     

城市轨道交通信号电源系统配置与功能分析

城市轨道交通信号系统是控制列车安全运行的系统,对其供电电源有着更高的稳定要求。信号系统的电源设备包括信号电源屏(含两路输入电源切换装置)、UPS(不间断电源)和蓄电池组,可向信号设备不间断地提供高品质纯净电源。文章简要描述了城市轨道交通信号电源屏的特点、电源屏的基本模块、电源监控组网方式及其电源配置方案与要求。     

Introduction: Habitual travel choice

In this introduction to the special issue on habitual travel choice, we provide a brief account of the role of habit in travel behaviour, discuss more generally what habitual choice is, and briefly review the issues addressed in the solicited papers. These issues include how habitual travel behaviour should be measured, how to model the learning process that makes travel choice habitual, and how to break and replace car-use habits.     

Habitual travel behaviour: Evidence from a six-week travel diary

This paper introduces different methods to measure similarity of travel behaviour addressing the question of how repetitious travel behaviour actually is. It compares empirical results of the different methods based on the data from a six-week travel diary. In general, the results show that the day-to-day behaviour is more variable if measured with trip-based methods instead of methods based on time budgets. Furthermore, it is confirmed that the similarity declines if the method captures more of the complexity of the travel pattern. It is also shown that travel behaviour is neither totally repetitious nor totally variable. Even for the whole observation period, it is demonstrated that two days always have some common elements. Additionally, it is found that the different methods yield the same pattern of variability for different types of day. Travel behaviour is clearly more stable on work days. Similar results for all methods are also obtained concerning the question of how long the minimum period of observation should be. All measures show that the period should not be less than two weeks if one aims at measuring variability.