Introduction: Habitual travel choice

In this introduction to the special issue on habitual travel choice, we provide a brief account of the role of habit in travel behaviour, discuss more generally what habitual choice is, and briefly review the issues addressed in the solicited papers. These issues include how habitual travel behaviour should be measured, how to model the learning process that makes travel choice habitual, and how to break and replace car-use habits.     

Habitual travel behaviour: Evidence from a six-week travel diary

This paper introduces different methods to measure similarity of travel behaviour addressing the question of how repetitious travel behaviour actually is. It compares empirical results of the different methods based on the data from a six-week travel diary. In general, the results show that the day-to-day behaviour is more variable if measured with trip-based methods instead of methods based on time budgets. Furthermore, it is confirmed that the similarity declines if the method captures more of the complexity of the travel pattern. It is also shown that travel behaviour is neither totally repetitious nor totally variable. Even for the whole observation period, it is demonstrated that two days always have some common elements. Additionally, it is found that the different methods yield the same pattern of variability for different types of day. Travel behaviour is clearly more stable on work days. Similar results for all methods are also obtained concerning the question of how long the minimum period of observation should be. All measures show that the period should not be less than two weeks if one aims at measuring variability.     

Process Save Reduction by Macro Joint Approach: The Key to Real Time and Efficient Vehicle Simulation

Applying a non-linear model reduction method to the tire suspension system of road vehicles enables an automatic transfer of complex offline simulation vehicle models to a mathematical model, which fits the real time simulation requirements. The basic assumption, that high frequent inner suspension dynamics are not relevant to handling manoeuvres, converts the differential algebraic equation system (DAE) of suspensions with kinematical closed loops into pure elasto-kinematical linkage equations. The equations of motions can be represented as an ordinary differential equation system (ODE) and considerable simulation time reductions are obtained for the off-line simulation and real time simulation is enabled. This so-called macro joint approach is an alternative modelling method to the well-known look-up table representation of suspension kinematics but it keeps the parameterisation of the original suspension model and is suitable to parameterised real time MBS models. With a second step the dynamics, caused by compliance in the suspension bushings, are reduced to their quasi-static behaviour. The consideration of these quasi-elasticity has nearly no influence on the necessary simulation time. This contribution shows the theoretical background and demonstrates the advantage of the macro joint model reduction approach on a typical vehicle example.     

Correlation between automotive CO, HC, NO, and PM emission factors from on-road remote sensing: implications for inspection and maintenance programs

Carbon monoxide (CO), hydrocarbon (HC), and nitrogen oxide (NO) emission factors (EFs) are measured with a commercial vehicle emissions remote sensing system (VERSS) during a large-scale vehicle exhaust emissions study in Las Vegas. Particulate matter (PM) EFs are simultaneously measured for individual vehicles with a newly developed PM-VERSS based on ultraviolet backscatter light detection and ranging (Lidar). The effectiveness of CO and HC EFs as proxy for NO and PM EFs for spark-ignition vehicles is evaluated. Poor correlations were found between EFs for pollutants on an individual vehicle basis indicating that high EFs for one or more pollutants cannot be used as a predictor of high EFs for other pollutants. Stronger functional relationships became evident after averaging the EF data in bins based on rank-order of a single pollutant EF. Low overlap between the highest 10% emitters for CO, HC, NO, and PM was found. These results imply that for an effective reduction of the four pollutants, inspection and maintenance (I/M) programs, including clean screening, should measure all four pollutants individually. Fleet average CO and HC concentrations determined by gaseous VERSS were compared with fleet average CO and HC concentrations measured at low-idle and at high-idle during local I/M tests for spark-ignition vehicles. The fleet average CO concentrations measured by I/M tests at either idle were about half of those measured by remote sensing. The fleet average high-idle HC concentration measured by I/M tests was about half of that measured by VERSS while low-idle I/M and VERSS HC average concentrations were in better agreement. For a typical vehicle trip, most of the fuel is burned during non-idle conditions. I/M measurements collected during idling conditions may not be a good indicator of a vehicle’s potential to be a high emitter. VERSS measurements, when the vehicle is under a load, should more effectively identify high emitting vehicles that have a large contribution to the mobile emissions inventory.     

汽车操纵动力学十八自由度模型仿真研究

本文介绍了根据多刚体动力学中的凯恩方法建立的一般两轴汽车的十八自由度数学模型。     

神经网络技术在车内噪声预测上的应用

本文根据神经网络理论，建立了单一工况下由发动机悬置点振动信号预测车内特定点低频噪声的神经网络模型，并针对驾驶员耳旁噪声进行了实验研究，结果表明：基于神经网络的单一工况车内噪声观测模型，可以频域内很好地预测出特定点的车内噪声。     

能感受负载的节能液压系统

提高大中液压传动的效率日渐成为系统设计的主要目标。较理想的系统应有能力在任何情况下使油泵流量恰好满足负载变化要求，而油压仅比负载压力略高一较小值。这里所介绍的是一种能感受负载的液压系统的工作原理，这能时刻根据负载情况调整泵压和流量，达到上述要求，因此具有优良的节能效果和操作性能。     

混凝土箱梁设计参数对温度效应的影响

在对水府庙混凝土箱梁桥温度场的实测和分析基础上,进行设计参数的研究,包括箱梁翼缘悬臂长度、腹板高度和桥梁轴线方位角对温度场和温度应力的影响,得到最大横向温差与（腹板高度/翼缘悬臂长度）的曲线图.     

Analysis of the effectiveness of control measures to mitigate road dust emissions in a regional network

The effectiveness of control measures to reduce road dust emissions is analyzed using a year’s data of road dust emissions collected with a mobile sampling platform and a survey of road maintenance practices in the Lake Tahoe Basin of Nevada and California US. Attributes such as sweeping practices, anti-icing, shoulder improvement, pavement condition, trackout, and abrasive material from road segments were analyzed with a feature subset selection algorithm. Street sweeping was found to be an effective means of controlling dust emissions from roads. Road dust from dirty tertiary roads served as a continuous source of suspendable material for adjacent high-speed roads in the winter time. To be most effective, emission control strategies require that not only primary roads, but all roads be swept after snow storms to recover applied abrasive material.