Process Save Reduction by Macro Joint Approach: The Key to Real Time and Efficient Vehicle Simulation

Applying a non-linear model reduction method to the tire suspension system of road vehicles enables an automatic transfer of complex offline simulation vehicle models to a mathematical model, which fits the real time simulation requirements. The basic assumption, that high frequent inner suspension dynamics are not relevant to handling manoeuvres, converts the differential algebraic equation system (DAE) of suspensions with kinematical closed loops into pure elasto-kinematical linkage equations. The equations of motions can be represented as an ordinary differential equation system (ODE) and considerable simulation time reductions are obtained for the off-line simulation and real time simulation is enabled. This so-called macro joint approach is an alternative modelling method to the well-known look-up table representation of suspension kinematics but it keeps the parameterisation of the original suspension model and is suitable to parameterised real time MBS models. With a second step the dynamics, caused by compliance in the suspension bushings, are reduced to their quasi-static behaviour. The consideration of these quasi-elasticity has nearly no influence on the necessary simulation time. This contribution shows the theoretical background and demonstrates the advantage of the macro joint model reduction approach on a typical vehicle example.     

Correlation between automotive CO, HC, NO, and PM emission factors from on-road remote sensing: implications for inspection and maintenance programs

Carbon monoxide (CO), hydrocarbon (HC), and nitrogen oxide (NO) emission factors (EFs) are measured with a commercial vehicle emissions remote sensing system (VERSS) during a large-scale vehicle exhaust emissions study in Las Vegas. Particulate matter (PM) EFs are simultaneously measured for individual vehicles with a newly developed PM-VERSS based on ultraviolet backscatter light detection and ranging (Lidar). The effectiveness of CO and HC EFs as proxy for NO and PM EFs for spark-ignition vehicles is evaluated. Poor correlations were found between EFs for pollutants on an individual vehicle basis indicating that high EFs for one or more pollutants cannot be used as a predictor of high EFs for other pollutants. Stronger functional relationships became evident after averaging the EF data in bins based on rank-order of a single pollutant EF. Low overlap between the highest 10% emitters for CO, HC, NO, and PM was found. These results imply that for an effective reduction of the four pollutants, inspection and maintenance (I/M) programs, including clean screening, should measure all four pollutants individually. Fleet average CO and HC concentrations determined by gaseous VERSS were compared with fleet average CO and HC concentrations measured at low-idle and at high-idle during local I/M tests for spark-ignition vehicles. The fleet average CO concentrations measured by I/M tests at either idle were about half of those measured by remote sensing. The fleet average high-idle HC concentration measured by I/M tests was about half of that measured by VERSS while low-idle I/M and VERSS HC average concentrations were in better agreement. For a typical vehicle trip, most of the fuel is burned during non-idle conditions. I/M measurements collected during idling conditions may not be a good indicator of a vehicle’s potential to be a high emitter. VERSS measurements, when the vehicle is under a load, should more effectively identify high emitting vehicles that have a large contribution to the mobile emissions inventory.     

Spatial Dynamics of Multibody Tracked Vehicles Part II: Contact Forces and Simulation Results

In this part of the paper, three dimensional computational capabilities, that includes significant details, are developed for the nonlinear dynamic analysis of large scale spatial tracked vehicles. Three dimensional nonlinear contact force models that describe the interaction between the track links and the vehicle components such as the rollers, sprockets, and idlers as well as the interaction between the track links and the ground are developed and used to define the generalized contact forces associated with the vehicle generalized coordinates. Tangential friction and contact forces are developed in order to maintain the stability of the track motion and avoid the slippage of the track or its rotation as a rigid body. Body and surface coordinate systems are introduced in order to define the spatial contact conditions. The nonlinear equations of motion of the tracked vehicle are solved using the velocity transformation procedure developed in the first part of this paper. This procedure is used in order to obtain a minimum set of differential equations, and avoid the use of the iterative Newton-Raphson algorithm. A computer simulation of a tracked vehicle that consists of one hundred and six bodies and has one hundred and sixteen degrees of freedom is presented in order to demonstrate the use of the formulations presented in this study.     

Spatial Dynamics of Multibody Tracked Vehicles Part I: Spatial Equations of Motion

In this paper, the nonlinear dynamic equations of motion of the three dimensional multibody tracked vehicle systems are developed, taking into consideration the degrees of freedom of the track chains. To avoid the solution of a system of differential and algebraic equations, the recursive kinematic equations of the vehicle are expressed in terms of the independent joint coordinates. In order to take advantage of sparse matrix algorithms, the independent differential equations of the three dimensional tracked vehicles are obtained using the velocity transformation method. The Newton-Euler equations of the vehicle components are defined and used to obtain a sparse matrix structure for the system dynamic equations which are represented in terms of a set of redundant coordinates and the joint forces. The acceleration solution obtained by solving this system of equations is used to define the independent joint accelerations. The use of the recursive equations eliminates the need of using the iterative Newton-Raphson algorithm currently used in the augmented multibody formulations. The numerical difficulties that result from the use of such augmented formulations in the dynamic simulations of complex tracked vehicles are demonstrated. In this investigation, the tracked vehicle system is assumed to consist of three kinematically decoupled subsystems. The first subsystem consists of the chassis, the rollers, the sprockets, and the idlers, while the second and third subsystems consist of the tracks which are modeled as closed kinematic chains that consist of rigid links connected by revolute joints. The singular configurations of the closed kinematic chains of the tracks are also avoided by using a penalty function approach that defines the constraint forces at selected secondary joints of the tracks. The kinematic relationships of the rollers, idlers, and sprockets are expressed in terms of the coordinates of the chassis and the independent joint degrees of freedom, while the kinematic equations of the track links of a track chain are expressed in terms of the coordinates of a selected base link on the chain as well as the independent joint degrees of freedom. Singularities of the transformations of the base bodies are avoided by using Euler parameters. The nonlinear three dimensional contact forces that describe the interaction between the vehicle components as well as the results of the numerical simulations are presented in the second part of this paper.     

Strava Metro data for bicycle monitoring: a literature review

ABSTRACT

Monitoring bicycle trips is no longer limited to traditional sources, such as travel surveys and counts. Strava, a popular fitness tracker, continuously collects human movement trajectories, and its commercial data service, Strava Metro, has enriched bicycle research opportunities over the last five years. Accrued knowledge from colleagues who have already utilised Strava Metro data can be valuable for those seeking expanded monitoring options. To convey such knowledge, this paper synthesises a data overview, extensive literature review on how the data have been applied to deal with drivers’ bicycle-related issues, and implications for future work. The review results indicate that Strava Metro data have the potential—although finite—to be used to identify various travel patterns, estimate travel demand, analyse route choice, control for exposure in crash models, and assess air pollution exposure. However, several challenges, such as the under-representativeness of the general population, bias towards and away from certain groups, and lack of demographic and trip details at the individual level, prevent researchers from depending entirely on the new data source. Cross-use with other sources and validation of reliability with official data could enhance the potentiality.     

Analysis of the effectiveness of control measures to mitigate road dust emissions in a regional network

The effectiveness of control measures to reduce road dust emissions is analyzed using a year’s data of road dust emissions collected with a mobile sampling platform and a survey of road maintenance practices in the Lake Tahoe Basin of Nevada and California US. Attributes such as sweeping practices, anti-icing, shoulder improvement, pavement condition, trackout, and abrasive material from road segments were analyzed with a feature subset selection algorithm. Street sweeping was found to be an effective means of controlling dust emissions from roads. Road dust from dirty tertiary roads served as a continuous source of suspendable material for adjacent high-speed roads in the winter time. To be most effective, emission control strategies require that not only primary roads, but all roads be swept after snow storms to recover applied abrasive material.     

Do parking requirements significantly increase the area dedicated to parking? A test of the effect of parking requirements values in Los Angeles County

Minimum parking requirements (MPRs) are the norm for urban and suburban development in the United States (Davidson et al., 2002). The justification for MPRs is that overflow parking will occupy nearby street or off-street parking. Shoup (1999a) and Willson (1995) provide cases where there is reason to believe that parking space requirements have forced parcel developers to place more parking than they would in the absence of parking requirements. However, to our knowledge the existing literature does not test the effect of parking minimums on the amount of lot space devoted to parking beyond a few case studies. This paper tests the hypothesis that MPRs bind for most land uses using data on suburban office, commercial, industrial and retail property sales from Los Angeles County using both direct and indirect approaches. Our indirect test of the effects of parking requirements is similar to the one used by Glaeser and Gyourko (2003). A simple theoretical model shows that the marginal value of additional parking to the sale price of a building should be equal to the cost of land plus the cost of parking construction. We estimate the marginal values of parking and lot area with spatial methods using a large data set from the Los Angeles area non-residential property sales and find that for most of the property types the marginal value of parking is significantly below that of the parcel area. In addition, we directly examine required and supplied parking and find that on average parking supplied is quite close to the required amount.     

Biogeography-based combinatorial strategy for efficient autonomous underwater vehicle motion planning and task-time management

Autonomous Underwater Vehicles (AUVs) are capable of spending long periods of time for carrying out various underwater missions and marine tasks. In this paper, a novel conflict-free motion planning framework is introduced to enhance underwater vehicle’s mission performance by completing maximum number of highest priority tasks in a limited time through a large scale waypoint cluttered operating field, and ensuring safe deployment during the mission. The proposed combinatorial route-path planner model takes the advantages of the Biogeography-Based Optimization (BBO) algorithm toward satisfying objectives of both higher-lower level motion planners and guarantees maximization of the mission productivity for a single vehicle operation. The performance of the model is investigated under different scenarios including the particular cost constraints in time-varying operating fields. To show the reliability of the proposed model, performance of each motion planner assessed separately and then statistical analysis is undertaken to evaluate the total performance of the entire model. The simulation results indicate the stability of the contributed model and its feasible application for real experiments.     

Effect of nozzle orifice diameter on diesel spray tip penetration according to various spray models for CFD simulation with widely varying back pressure

CFD simulations of spray tip penetration with the standard KIVA3V, ‘original gas jet’ and ‘Normal gas jet profile with breakup length formula’ (NGJBL) spray models were performed to investigate the effects of nozzle orifice size and ambient gas density combinations on the spray penetration. The accuracy of the CFD simulation results was estimated by comparing them with available experimental data. The ambient gas density was varied in 12 kg/m³ intervals from 12 to 69 kg/m³ for each nozzle orifice diameter. The nozzle orifice diameters used were 119, 140, 183 and 206 mm. A total of 20 cases in the CFD simulations were considered with combinations of the 4 nozzle orifice diameters and 5 ambient gas densities. CFD simulations with the NGJBL spray model were more accurate than those with either the standard KIVA3V or gas jet spray models as the nozzle orifice diameter and ambient gas density was increased. The NGJBL and original gas jet model is more effective in predicting the spray tip penetration near the nozzle tip region.