Adapting the light · biomass (BZI) models of phytoplankton primary production to shallow marine ecosystems

Several authors have reported a strong linear relationship between daily phytoplankton production and the product of chlorophyll biomass, photic depth, and incident irradiance for a variety of estuaries. This “light · biomass” (BZ_pI_o) formulation has been proposed as an alternative to traditional mechanistic approaches for computing phytoplankton production in numerical estuarine models. One limitation to their application in shallow systems is that the BZ_pI_o models have been developed in relatively deep estuaries where light does not reach the bottom. We propose a nonlinear correction factor to adapt the BZ_pI_o relationship to shallow systems where light does reach the bottom. Our function takes into account variations in incident irradiance, attenuation coefficient for light, photosynthetic efficiency, and maximum rate of photosynthesis. A series of correction polynomials are proposed for various ranges of incident irradiance, and are integrated into a single multiple polynomial which applies across all irradiance levels. Our new correction factor was tested against a ¹⁴C-based productivity dataset from shallow stations in Narragansett Bay, RI and an O₂-based dataset from shallow (1.1 m) lagoon mesocosms at the University of Rhode Island. Results showed that our polynomials accurately correct BZ_pI_o-predicted rates of production in shallow water columns. Application of our correction factor to a series of shallow water productivity datasets from the literature together with theoretical calculations show how significant the shallow water correction can be, especially in very shallow water columns with low turbidity.     

Study of in-vehicle route guidance systems for improvement of right-side drivers in the Japanese traffic system

A country can adopt one of two standards for traffic flow — cars may travel on the left or right side of the road. When drivers who are accustomed to driving on the right side of the road drive on the left side, and vice versa, the mental workload is likely increased due to the driver’s unfamiliarity with a new language, the position of the driver’s seat, different driving directions, and other factors that differ from those of their home country. One method of doing this is to make sure that the in-vehicle route guidance information (RGI) is not overly complicated — thereby assisting drivers in improving their safety. Consequently, the aim of this study was to facilitate mobility and improve safety for natural right-side drivers driving temporarily in left-side traffic. In this study, driver behavior and workload — given various types of RGI — were evaluated in a driving simulator with a variety of prescribable test conditions. This research was composed of two experiments. In the first, various types of in-vehicle route guidance systems were tested and evaluated in terms of their characteristics and associated driver behaviors (while driving). In the second experiment, systemic factors and effectiveness were evaluated by two combined systems, arrow and map-type information, based on the results of the first experiment. In light of both experiments, the various types of route guidance systems were discussed in terms of their results. A navigation system was proposed to alleviate some of the secondary tasks such as route selection.     

Torque characteristics analysis for optimal design of a copper-layered eddy current brake system

An enhanced parametric model for a copper-layered eddy current electric machine (retarder) is introduced in this paper. The modeled torque characteristics of the copper-layered electromagnetic retarders are based on the results from a detailed electromagnetic finite element analysis (FEA) of these eddy current machines. The model uses a parameterized double-exponential function to model the steady state speed-torque characteristics of the retarder. The parameters are adjusted for optimal braking performance in conjunction with predicted speed-torque characteristics of a copper-layered retarder. A full vehicle model, along with the proposed retarder speed-torque model has been used to simulate a series braking events. The simulation results show that the peaks of the retarder speed-torque curves must be designed to occur within a specific range of speeds for optimal braking performance.     

Topological analysis of powertrains for refuse-collecting vehicles based on real routes–Part I: Hybrid hydraulic powertrain

In this two-part paper, a topological analysis of powertrains for refuse-collecting vehicles (RCVs) based on the simulation of different architectures (internal combustion engine, hybrid electric, and hybrid hydraulic) on real routes is proposed. In this first part, a characterization of a standard route is performed, analyzing the average power consumption and the most frequent working points of an internal combustion engine (ICE) in real routes. This information is used to define alternative powertrain architectures. A hybrid hydraulic powertrain architecture is proposed and modelled. The proposed powertrain model is executed using two different control algorithms, with and without predictive strategies, with data obtained from real routes. A calculation engine (an algorithm which runs the vehicle models on real routes), is presented and used for simulations. This calculation engine has been specifically designed to analyze if the different alternative powertrain delivers the same performance of the original ICE. Finally, the overall performance of the different architectures and control strategies are summarized into a fuel and energy consumption table, which will be used in the second part of this paper to compare with the different architectures based on hybrid electric powertrain. The overall performance of the different architectures indicates that the use of a hybrid hydraulic powertrain with simple control laws can reduce the fuel consumption up to a 14 %.     

Optimal scheduling of the flexray static segment based on two-dimensional bin-packing algorithm

FlexRay is a reliable and hard real-time in-vehicle communication protocol that is strongly promoted by car manufacturers as the de facto standard in the automotive domain. The protocol offers both a time-triggered and an eventtriggered architecture. This paper focuses on the optimal scheduling of the time-triggered component of FlexRay known as the static (ST) segment using a two-dimensional bin-packing technique. To maximize the bandwidth utilization in the ST segment, a fast heuristic as well as an efficient integer linear programming approach are proposed. Our methods directly schedule signals into slots including frame packing, according to signal-based data scheduling and the slot/ cycle multiplexing mechanisms presented by the latest version of the FlexRay protocol. The benefits of our proposed methods are demonstrated by extensive experiments on synthetic and an automotive X-by-wire system case study. An additional test case is examined to emphasize the superior performance of the proposed approach relative to that of existing optimal scheduling approaches.     

Choice of parking: Stated preference approach

Over recent years, parking policy has become a key element of transport policy in many countries. Parking policy measures can affect many different dimensions of travel behaviour but are likely to be most significant in terms of travellers' choice of parking type and location. This dimension of travel choice has, to date, received comparatively little attention, yet is of vital importance if we are to properly understand and predict the effects of parking policy measures.This paper presents two studies addressing this issue carried out in the United Kingdom and Germany. Both studies used a stated preference approach in order to collect disaggregate data on travellers responses to changes in parking attributes and used these data to build simple logit models of parking type choice. The studies were designed in order to allow comparable choice models to be estimated from the two datasets. The results obtained strongly indicate the need to separately identify the costs associated with different components of the parking activity (e.g., general in-vehicle time, parking search time, egress time) and also point to the existence of significant differences in the relative valuation of these components across different journey purposes. Where possible, the results of the choice modelling exercises are also compared with existing revealed and stated preference results and are found to be generally in line with prior expectations.     

Improving the predictiveness of the quasi-d combustion model for spark ignition engines with flexible intake systems

Fast and predictive simulation tools are prerequisites for pursuing simulation based engine control development. A particularly attractive tradeoff between speed and fidelity is achieved with a co-simulation approach that marries a commercial gas dynamic code WAVE™ with an in-house quasi-dimensional combustion model. Gas dynamics are critical for predicting the effect of wave action in intake and exhaust systems, while the quasi-D turbulent flame entrainment model provides sensitivity to variations of composition and turbulence in the cylinder. This paper proposes a calibration procedure for such a tool that maximizes its range of validity and therefore achieves a fully predictive combustion model for the analysis of a high degree of freedom (HDOF) engines. Inclusion of a charge motion control device in the intake runner presented a particular challenge, since anything altering the flow upstream of the intake valve remains “invisible” to the zero-D turbulence model applied to the cylinder control volume. The solution is based on the use of turbulence multiplier and scheduling of its value. Consequently, proposed calibration procedure considers two scalar variables (dissipation constant C _β and turbulence multiplier C _M ), and the refinements of flame front area maps to capture details of the spark-plug design, i.e. the actual distance between the spark and the surface of the cylinder head. The procedure is demonstrated using an SI engine system with dual-independent cam phasing and charge motion control valves (CMCV) in the intake runner. A limited number of iterations led to convergence, thanks to a small number of adjustable constants. After calibrating constants at the reference operating point, the predictions are validated for a range of engine speeds, loads and residual fractions.     

Primary productivity and export fluxes on the Canadian shelf of the Beaufort Sea: A modelling study

We present a coupled sea ice–ocean-biological (including ice algae) model in the Arctic Ocean. The 1D model was developed and implemented on the Canadian Beaufort Sea shelf to examine the importance of different physical processes in controlling the timing and magnitude of primary production and biogenic particle export over an annual cycle (1987). Our results show that the snow and sea ice cover melt and/or break-up controls the timing of the phytoplankton bloom but primary producers (ice algae and phytoplankton) on the outer shelf are essentially nutrient limited. The total annual primary production (22.7 to 27.7 g-C m^? 2) is thus controlled by nutrient “pre-conditioning” in the previous fall and winter and by the depth of wind mixing that is controlled in part by the supply of fresh water at the end of spring (ice melt or runoff). The spring bloom represents about 40% of the total annual primary production and occurs in a period of the year when sampling is often lacking. Time interpolation of observed values to obtain total annual primary production, as done in many studies, was shown to lead to an underestimation of the actual production. Our simulated ratios of export to primary production vary between 0.42 and 0.44.     

Experimental investigation using CFD for thermal performance of ventilated disc brake rotor

In the present work, different ventilated disc brake rotor configurations were analysed to enhance the heat transfer rate and obtain the uniform temperature distribution in the rotor. CFD code used in this work was validated at using experimental results obtained by conducting experiments on a test rig. The experimental analysis was performed to calculate the mass flow rate and heat dissipation through the rotor. Further, different types of rotor configurations viz. straight radial vane (SRV), tapered radial vane (TRV), alternate long and short vane (ALSV), variable diameter circular pillars (VDCP) were considered for the analysis. A rotor segment of 20° was considered for the numerical analysis due to its rotational symmetry. CFD results were in good agreement with the experiments. The maximum deviation of the numerical results were about 12 % from the experimental results. It is found from the analysis that among the different types of rotor configurations; variable diameter circular pillars (VDCP) rotor gives better rate of heat dissipation with more uniform temperature distribution in the flow passages. Hence for modern high speed vehicles VDCP rotor may be more appropriate.