基于ANN的船舶撞击高桩码头群桩损伤位置预测

本文采用有限元软件ABAQUS建立了船舶撞击高桩码头群桩的空间有限元模型。通过计算评估了撞击力、桩体刚度、撞击位置和撞击角度下对群桩结构损伤位置的影响。基于人工神经网络(ANN)方法,对不同参数组合下的群桩结构损伤位置进行了预测,并对ANN方法的可行性进行了评估。     

Development and calibration of a long-distance passenger traffic assignment model

This paper studies the assignment of long-distance passenger traffic on a highway corridor network. First, we propose a traditional model for the long-distance traffic assignment considering interactions with local commuter traffic. It addresses the effect of local networks on highway corridors. An iterative algorithm is developed to solve for the exact solution. Then, to address the potential computational issues that arise therein, a decomposition method is proposed by introducing a new concept of corridor elasticity. An assignment procedure for long-distance passenger traffic is developed accordingly. Numerical tests show that the proposed decomposition method makes significant improvements in computational performance at a small loss of optimality. This decomposition method well approximates the exact assignment from the traditional formulation, especially when the highway corridors are near-saturation. The proposed decomposition method appears practical for application.     

Effect of interference fits on the fatigue lives of bolted composite joints

The effect of interference fits on the fatigue lives of bolted composite joints is investigated by conducting mechanical tests. Static and fatigue tests are carried out on specimens made of carbon-bismaleimide composites joined together as double-lap single-bolt joints. The bolts having interference fits ranging of 0 (neat fit), 0.5%, 0.75% and 1% are performed. The results demonstrate the relationship between fatigue life and different values of interference fits. After the fatigue tests, non-destructive evaluation (NDE) and scanning electron microscope (SEM) are used to observe the damage of the surrender and surface of the hole. The test results show that the interference fitted specimens have improved fatigue life compared to the neat fitted specimen. The NDE and SEM results reveal that the damage degree of interference fitted specimen is weaker than that for the neat fitted one.     

反激变换器电流连续和断续的比较研究

根据单端反激变换器的电路和工作波形,推导了其在输出电流连续和不连续情况的工作原理,并且给出了在MATLAB/Simulink中的正激变换器的仿真模型和仿真结果。通过对仿真结果的分析得出以下结论:其优点是电路所用元器件少,电路简洁。其缺点如下:输出功率较小,稳定性较差,以及开关应力大,电路能量损耗较大。     

基于Prover的联锁软件形式化验证过程研究

计算机联锁系统是铁路信号控制系统的核心设备,是有着苛刻安全要求的复杂控制系统。本文采用Prover形式化开发工具对联锁软件安全需求进行形式化验证。通过模型检验的形式化验证方法,遍历系统输入变量的所有状态空间.验证联锁特定应用满足系统安全需求,确保系统的安全性得以正确实现。在保证系统安全性的基础上,以全状态空间查找反例的检验方法进一步提升产品的质量。     

船舶柴油机调速器有限转角力矩电机优化控制

本文针对新型的船舶柴油机调速器有限转角力矩电机控制系统优化与稳定性问题,在Matlab/Simulink中基于电枢回路方程与力矩方程搭建有限转角力矩电机动态系统模型.通过数据拟合方法构建电机非线性模型,基于线性控制理论对串级PID控制系统进行稳定性分析,最后使用遗传算法对PID参数进行优化设计.研究成果可为该电机用于柴油机电子调速执行机构提供优化及控制参考.     

Elasto-plastic modeling of soft soil considering degradation of stiffness

The stiffness has a large influence on the behavior of soils. Its value is affected by some of the soils properties, such as the over consolidated ratio(OCR), the effective normal stress, and the plasticity index etc. In this paper, the numerical modeling of soft soils was carried out using an improved elasto-plastic S-clay1 model accounting for degradation of stiffness. The relation between the stiffness and the shear strain was established based on a large number of experimental data. The effects of strain-dependent stiffness of normally consolidated soils and over consolidated soils on the stress-strain behavior were studied through a comparison of the simulations with the experimental results of undrained triaxial compression tests. The results show that the behaviors of soils can be well predicted with the improved constitutive model, particularly before the peak stress.     

Recursive least squares algorithm for a nonlinear additive system with time delay

This paper proposes a recursive least squares algorithm for a nonlinear additive system with time delay. By the Weierstrass approximation theorem and the key term separation principle, the model can be simplified as an identification model. Based on the identification model, a recursive least squares identification algorithm is used to estimate all the unknown parameters of the time-delayed additive system. An example is provided to show the effectiveness of the proposed algorithm.     

Decomposing and Cluster Refinement Design Method for Application-Specific Network-on-Chips

Along with higher and higher integration of intellectual properties (IPs) on a single chip, traditional bus-based system-on-chips (SoC) meets several design difficulties (such as low scalability, high power consumption, packet latency and clock tree problem). As a promising solution, network-on-chips (NoC) has been proposed and widely studied. In this work, a novel algorithm for NoC topology synthesis, which is decomposing and cluster refinement (DCR) algorithm, has been proposed to minimize the total power consumption of application-specific NoC. This algorithm is composed of two stages: decomposing with cluster generation, and cluster refinement. For partitioning and cluster generation, an initial low-power solution for NoC topology is generated. For cluster refinement, the clustering is optimized by performing floorplan to further reduce power consumption. Meanwhile, a good tradeoff between power consumption and CPU time can be achieved. Experimental results show that the proposed method outperforms the existing work.     

正激变换器的五维可视化优化设计

本文对正激变换器进行了输出本安特性分析,从满足纹波电压指标和最大输出短路放电能量最小的角度,采用五维数据可视化技术,在MATLAB环境下通过程序设计展现全局的值域分布,从而对电感、电容参数进行优化设计,以提高电路的稳定性。