Analysis of Ground Response and Structure Stress Induced by PBA Method北大核心CSCD

The application of prefabricated tunnel technology has been become a new research field both in China and abroad. Based on the running tunnel between Yufuhe station and Wangfuzhuang station of Jinan rail transit line R1, a new prefabricated tunnel construction technology, the PBA method is presented. This paper makes a detailed discussion on section form, supporting scheme and construction process of the PBA method. In this study, 3D a new 3D numerical model for PBA method is presented by finite difference numerical simulation software Flac and the construction processes are modeled. The rule of ground surface settlement, ground deformation and structural stress caused by PBA method is studied in detail. Results show that the structure of PBA method can effectively control the deformation magnitude and scope. Stress concentration appears at the prefabricated connection parts and the reinforcement needs to check. The total assembled structure forms the load-bearing system after the completion of the lateral wall. The built-in depth of the precast pile and pile bottom grouting quality should to be ensured to control the displacement of the precast piles. The results of this study will be a useful reference for similar projects in the future. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Comparative Analysis of Calculation Methods for Jacking Force of Jacking Pipes北大核心CSCD

Jacking force is the most important parameter in jacking pipe engineering, and reasonable calculation of jacking forces plays an important role in safe and smooth pipe jacking construction. There are many calculation methods for pipe jacking force at present, and the calculation results may be affected to some extent by different cal⁃ culation methods. For this reason, calculation methods of jacking force (frictional resistance) were collected and a comparative analysis was conducted with aspects to the advantages, disadvantages and applicabilities. The results show that as for the jacking force calculated by empirical formulae, the soil layer classifications corresponding to giv⁃ en frictional force per unit area and relevant factors to be considered are different, and the values of frictional force per unit area between pipe and soil in the same soil layer are also different; as for the jacking force calculated by theo⁃ retical formulae, the calculation methods for vertical earth pressure at crown are different and much effected by the pipe buried depth; as for the jacking force calculated by numerical simulation, the selected theories for the simula⁃ tion program and the construction factors to be considered during simulation are different. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Soil Body Deformation Caused by Construction of a Double-Line Shield Tunnel with Multiple Factors北大核心CSCD

Considering the influence of many factors (soil loss, frontal additional thrust, the friction force of the shield shell and the additional grouting force), a method for improving the uniform soil body movement model is pro-posed, and a mechanical calculation model is established to study the calculation method for soil body deformation caused by double-line parallel shield driving. Based on the Mindlin solutions of elastic mechanics, the theoretical solutions for soil body deformations caused by the last three factors are calculated; considering the uniform soil body movement model, the theoretical solutions for soil body deformations caused by soil loss are calculated, then the to-tal theoretical solutions for soil body deformations under multiple factors are obtained by means of superposition. The vertical surface settlement, vertical horizontal displacement, and vertical displacements of the soil body at different depths of Hangzhou Metro Line 1 are calculated to analyze the variation laws. Meanwhile the influential factors for horizontal displacement variation are studied. The research shows that with a change of depth, the settlement of the soil body changes within the scope of 10 to 13 m in the horizontal direction near where the maximum settlement occurs;the direction of the horizontal displacement of the soil body changes with a change of the positional relationship be-tween the calculation points and the tunnel; and with an increase of interval J for the two tunnels, the horizontal dis-placement of the soil body of a deep double-line tunnel decreases while the displacement near the surface changes slightly. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Formulating cargo inventory costs for liner shipping network design

This study examines how to incorporate the inventory costs of containerized cargoes into existing liner service planning models such that the designed networks could be improved while not causing extra modeling/computational burden. Two approaches are compared: (i) not considering the inventory costs at all and (ii) incorporating the inventory costs associated with onboard time and those related to transshipment by assuming a fixed connection time. The two models are compared with the ideal model capturing the exact inventory costs on a route choice problem and a capacity planning problem based on extensive randomly generated and practical numerical experiments. The results show that: first, ignoring the inventory costs in service planning models may lead to network design with much higher costs (poor network design decisions); second, in service planning models assuming weekly frequency, the inventory costs associated with onboard time could be formulated exactly, and those related to the connection time of weekly services could be approximated by assuming fixed connection time of 3.5 days for ports with 1 day’s minimum connection time and 4.5 days for ports with 2 days’ minimum connection time.     

Mathematically calculating the transit time of cargo through a liner shipping network with various trans-shipment policies

This paper derives the mathematical expressions for the transit time of cargo through a liner shipping network. Main efforts are devoted to deriving the calculation expressions of the connection time of cargo during trans-shipment. For the forward and many-to-one trans-shipment policies, we conduct a minor correction towards the expressions in existing studies to improve the completeness. Meanwhile, we propose an alternative but more straightforward calculation method for connection time which bypasses the complicated inductive argument in existing studies. Then we introduce two new trans-shipment policies: backward trans-shipment and one-to-many trans-shipment, and mathematically calculate the corresponding connection times. Numerical experiments also deliver some managerial insights into the effectiveness of backward trans-shipment in transit time control.     

吸盘式挖泥船全电力驱动系统设计

本文根据某吸盘式挖泥船的使用要求,设计了全电力驱动系统方案。对配电系统方案、变频驱动系统方案和谐波处理方案进行了详细分析。与当前典型的挖泥船变频驱动系统方案相比,本文提出了一种新的更加经济的系统方案,并在实船已成功应用。     

提高应变梁加工合格率

本文分析了应变梁因平面度超差而出现的质量问题,通过刀具、加工参数等方面改进来提高其加工质量。     

故障树和神经网络在遥测装备故障中的研究

论文通过分析遥测装备的故障特性及其原因,结合对遥测装备变频单元故障树的定性和定量分析。构建了基于故障树的人工神经网络故障诊断断系统,根据系统编写了相应的程序以实现功能。通过实例验证了方法的实用性和有效性,增强了遥测设备的智能故障诊断能力。     

Buck斩波电路电流连续与电流断续的比较研究

对降压斩波电路负载加反电动势其电流在不同情况下发生的连续和断续现象进行了研究。根据分段线性化思想,推断出降压斩波电路输出电流在断续情况下的条件,给出了其在电流断续的计算公式,为其实际应用提供了方便。     

谐振直流环软开关电路的技术研究

阐述了应用于电压型逆变器的谐振直流环电路的工作原理,给出了其在MATLAB/Simulink中的仿真模型和仿真结果。通过仿真结果得出,谐振直流环电路可实现零电压开通,使开关损耗为零,但是电压u Cr谐振峰值很高,增加了对逆变器开关器件耐压的要求。