低噪声车轮的原理、试验及应用前景

通过理论分析和试验，对欧洲近几年的几种低噪声车轮的设计原理及试验效果做出了评价，对低噪声车轮在货运及高速运输中的应用前景做了分析。     

The influence of food quality on the nutritional acclimation of the copepod Acartia clausi

The influence of food quality on the nutritional metabolism of Acartia clausi was studied experimentally using four different diets: (1) diatom cells of Thalassiosira weissflogii, (2) detritus prepared from the same culture, (3) 50 : 50 mix on a protein basis of the two previous diets, and 4) dinoflagellate cells of Prorocentrum micans. For each trophic, ingestion, gut transit time, trypsin activity and K_m (half saturation constant) were measured at limiting and saturating concentration. Assimilation rates were also estimated for both pure diatoms and mixed live–detrital cell diets. Ingestion followed a Holling type 2 response for diets 1 and 4, a linear one for detritus and an intermediate response for diet 3. Gut transit time displayed different adaptive changes with food regime depending on protein concentration. Trypsin activity was lower for detrital food and trypsin K_m significantly decreased with increasing concentration of live diatoms. Assimilation rates were higher for live food than for mixed live–detrital food. Results illustrated that Acartia-type copepods optimize nitrogen or protein uptake. They suggest that besides chemoreception-mediated selectivity, internal controls by digestion and assimilation also regulate ingestion (feed-back).     

The Effect of Topboxes on Motorcycle Stability

Hot wire anenometry measurements have been made in the wake of a model motorcycle and rider mounted in a windtunnel. Only in tests with a topbox present is there clear evidence of eddy shedding. Calculations have been performed on the corresponding full-scale motorcycle to determine the frequencies of the weave and wobble modes. Comparison with the wake frequencies extrapolated to full size show that at speeds of 31-34 m/s they coincide with those of the wobble mode which is found to be efficiently coupled to the aerodynamic excitation.     

Prediction of fatigue life and estimation of its reliability on the parts of an air suspension system

Air suspension systems have been implemented in various commercial vehicles, such as buses and special purpose trucks, because of the comfortable ride and easy height control. An evaluation of the durability of vehicle parts has been required for service life and safety starting in the early stages of design. The cyclic load applied to the vehicle can cause fatigue failure of parts, such as the suspension frame. This paper presents a method to predict the fatigue life of the suspension frame at the design stage of the air suspension system used in a heavy-duty vehicle. To estimate the fatigue life using the SN method, the Dynamic Stress Time History (DSTH) is necessary for the part of interest. DSTH can be obtained from the results of the flexible body dynamic analysis using the Belgian road simulation and the Modal Stress Recovery (MSR) method. Furthermore, the reliability of the predicted fatigue life can be evaluated by considering the variations in material properties. The probability and distribution of the expected life cycle can be obtained using experimental design with a minimum number of simulations. The advantage of using statistical methods to evaluate the life cycle is the ability to predict replacement time and the probability of failure of mass-produced parts. This paper proposes a rapid and simple method that can be effectively applied to the design of vehicle parts.     

Perspectives on railway track geometry condition monitoring from in-service railway vehicles

This paper presents a view of the current state of monitoring track geometry condition from in-service vehicles. It considers technology used to provide condition monitoring; some issues of processing and the determination of location; how things have evolved over the past decade; and what is being, or could/should be done in future research. Monitoring railway track geometry from an in-service vehicle is an attractive proposition that has become a reality in the past decade. However, this is only the beginning. Seeing the same track over and over again provides an opportunity for observing track geometry degradation that can potentially be used to inform maintenance decisions. Furthermore, it is possible to extend the use of track condition information to identify if maintenance is effective, and to monitor the degradation of individual faults such as dipped joints. There are full unattended track geometry measurement systems running on in-service vehicles in the UK and elsewhere around the world, feeding their geometry measurements into large databases. These data can be retrieved, but little is currently done with the data other than the generation of reports of track geometry that exceeds predefined thresholds. There are examples of simpler systems that measure some track geometry parameters more or less directly and accurately, but forego parameters such as gauge. Additionally, there are experimental systems that use mathematics and models to infer track geometry using data from sensors placed on an in-service vehicle. Finally, there are systems that do not claim to measure track geometry, but monitor some other quantity such as ride quality or bogie acceleration to infer poor track geometry without explicitly measuring it.     

旅游与公共交通——以高绍尔地区为例

休闲旅游在公共运输业中的地位越来越重要，而且几乎与每日上下班和商业服务人员增加的 速率同步增长。凡是在有交通运输市场服务的地方，对以休闲为目的的公交服务的需求也在 稳步增长。在这一方面，包括周末假日和周日期间在内潜在的需求就显得特别重要。 　　在这一背景下，RLG(鲁尔-利贝地区公共交通公司）为了改善公共交通对休闲设施的服务， 多年来一直积极与当地的旅游相关产业合作，以便提高旅游业的吸引力。以下便是高绍 尔地区旅游服务业的几个例子。 　　RLG 　　鲁尔-利贝地区公共交通公司（RLG）是公共交通集团威斯特法伦州公共交通集团（ WVG)的一个下属分支机构，它与其它几个运输服务的分支机构一起构成了这个公共交通集团 ：明斯特地区交通运输公司（RVM），鲁尔-利贝地区公共交通公司（RLG），乌纳地区交通运输公司（VKU），威斯特法伦铁路运输公司（WLE）。     

The influence of the Agulhas Current on the adjacent coastal ocean: possible impacts of climate change

The dynamics of the coastal ocean along the southeastern coast of Africa is dominated by a strong and intense western boundary current, the Agulhas Current. With a near-uniform, narrow continental shelf and a steep shelf slope that stabilizes this current, the trajectory of the Agulhas exhibits great stability. The only substantial perturbation occurs with the irregular passage of a Natal Pulse, a soliton meander. The initiation of this meander at the Natal Bight is due to a barotropic instability when the intensity of the landward border of the current exceeds a certain threshold value. This may come about with natural fluctuations in the current or with the adsorption of deep-sea eddies onto the current. Under a climate change scenario of altered wind stress curl over the South Indian Ocean it is conceivable that the threshold for the triggering of a Natal Pulse will occur more frequently. This will lead to a situation where the current axis on average lies further offshore. The possible consequences of such a situation on the rainfall of the coast, on the ecology of estuaries and the coastal ocean, and on the socio-economics of the region is discussed.     

现代机车电传动仿真工具

现代机车动车是一个很复杂的系统,在开发过程中,机械、电子技术和调节技术的专家们必须密切合作.如果既要交换输入数据和结果,又要子系统模型相互直接连接,那么现代仿真工具能极有效地支持这种开发过程.     

Using a random displacement model to simulate turbulent particle motion in a baroclinic frontal zone: A new implementation scheme and model performance tests

Numerical artifacts can limit accurate simulation of turbulent particle motion when Lagrangian particle-tracking models are implemented in hydrodynamic models with stratified conditions like fronts. Yet, modeling of individual particle motion in frontal regions is critical for understanding sediment dynamics as well as the transport and retention of planktonic organisms. The objective of this research was to develop a numerical technique to accurately simulate turbulent particle motions in a particle-tracking model embedded within a hydrodynamic model of a frontal zone. A new interpolation scheme, the ‘water column profile’ scheme, was developed and used to implement a random displacement model for turbulent particle motions. A new interpolation scheme was necessary because linear interpolation schemes caused artificial aggregation of particles where abrupt changes in vertical diffusivity occurred. The new ‘water column profile’ scheme was used to fit a continuous function (a tension spline) to a smoothed profile of vertical diffusivities at the x–y particle location. The new implementation scheme was checked for artifacts and compared with a standard random walk model using (1) Well Mixed Condition tests, and (2) dye-release experiments. The Well Mixed Condition tests confirmed that the use of the ‘water column profile’ interpolation scheme for implementing the random displacement model significantly reduced numerical artifacts. In dye-release experiments, high concentrations of Eulerian tracer and Lagrangian particles were released at the same location up-estuary of the salt front and tracked for 4 days. After small differences in initial dispersal rates, tracer and particle distributions remained highly correlated (r = 0.84 to 0.99) when a random displacement model was implemented in the particle-tracking model. In contrast, correlation coefficients were substantially lower (r = 0.07 to 0.58) when a random walk model was implemented. In general, model performance tests indicated that the ‘water column interpolation’ scheme was an effective technique for implementing a random displacement model within a hydrodynamic model, and both could be used to accurately simulate diffusion in a highly baroclinic frontal region. The new implementation scheme has the potential to be a useful tool for investigating the influence of hydrodynamic variability on the transport of sediment particles and planktonic organisms in frontal zones.