Numerical Optimization of the Linear Dynamic Behaviour of Commercial Vehicles

The demands upon the dynamic behaviour of a vehicle can be stated as an optimization problem. The optimum solution is calculated using an iterative optimization algorithm. Scaling the problem by non-linear transformations reduces the number of iterations. Lagrange multipliers provide useful information about the sensitivity of the optimum with respect to changes of the constraints. The analysis of the dynamic behaviour is performed in the frequency domain. New structural variants are calculated using system synthesis. As an example, the engine, cab and wheel suspension systems of a tractor/semi-trailer have been optimized all together.     

Regularity and irreversibility of weekly travel behavior

Dynamic characteristics of travel behavior are analyzed in this paper using weekly travel diaries from two waves of panel surveys conducted six months apart. An analysis of activity engagement indicates the presence of significant regularity in weekly activity participation between the two waves. The analysis also shows a general lack of association between regularity in activity participation and change in person and household attributes, suggesting the presence of behavioral inertia or response lags. It is further shown that observed trip rates do not exhibit patterns that would be observed if travel behavior had no response lag and no history dependence. The results point to the needs for models that are capable of representing these aspects of travel behavior.     

OSCAR statement of methods

OSCAR (Outil de Simulation du CAptage pour la Reconnaissance des défauts) is the pantograph–catenary dynamic software developed by Société Nationale des Chemins de fer Français (SNCF) since 2004. A three-dimensional finite element (FE) mesh allows the modelling of any catenary type: alternating current (AC) or direct current (DC) designs, and conventional or high-speed lines. It is a representative of the real overhead line geometry, with contact wire (CW) irregularities, staggered alignment of the CW, dropper spacing, wire tension, etc. Nonlinearities, such as slackening of droppers and unilateral contact between the pantograph and the CW, are taken into account. Several pantograph models can be used, with a complexity level growing from the three-lumped-mass model to the multibody model. In the second case, a cosimulation between the FE method catenary and the multibody pantograph models has been developed. Industrial features for pre- and post-treatments were developed to increase robustness of results and optimise computation time. Recent developments include volume meshing of the CW for stress computation or statistical analysis and lead to new fields of studies such as fatigue failure or design optimisation. OSCAR was fully validated against in-line measurements for its different AC and DC catenary models as well as its different pantograph models (with independent strips for instance) and has continuously been certified against EN50318 since 2008.     

Managing Traffic by Privatization of Road Capacity: A Property Rights Approach

Abstract

Road congestion remains a serious problem, despite all the efforts to limit road use and to manage growing road traffic volumes. Economic approaches (such as pricing) are introduced based on traditional welfare economic theory. Although they are sometimes very successful, the magnitude of traffic issues also requires alternative and unconventional approaches. Perhaps a more innovative perspective is needed. The paper discusses an alternative economic approach starting from property rights theory. It is translated in transport systems in concepts of infrastructure capacity slot management, where slots are dynamically priced and exclusively allocated to individual users. Debates and practices regarding this approach in air traffic and rail traffic are further developed than in the field of road traffic. The paper aims to explore the potential benefits and disadvantages of the property rights approach for road traffic. Attention is paid to major institutional and technical conditions. The conclusion is that the approach theoretically has clear advantages and seems technologically feasible. Nevertheless, serious political and institutional issues have to be solved first.     

Road pricing with complications

The rationale for congestion charges is that by internalising the marginal external congestion cost, they restore efficiency in the transport market. In the canonical model underlying this view, congestion is a static phenomenon, users are taken to be homogenous, there is no travel time risk, and a highly stylised model of congestion is used. The simple analysis also ignores that real pricing schemes are only rough approximations to ideal systems and that inefficiencies in related markets potentially affect the case for congestion charges. The canonical model tends to understate the marginal external congestion cost because it ignores user heterogeneity and trip timing inefficiencies. With respect to the relevance of interactions between congestion and congestion charges and tax distortions and distributional concerns, recent insights point out that there is no general case for modifying charges for such interactions. Therefore the simple Pigouvian rule remains a good first approximation for the design of road charging systems.     

Recent developments in national and international freight transport models within Europe

The past decade has seen many new freight transport models for use in transport planning by public authorities. Some of these models have developed new concepts, such as logistics modules, inclusion of transshipments, storage and sourcing and the determination of shipment size. This paper provides a review of the European literature on freight transport models that operate at the national or international level and have been developed since 2004. The introduction of elements of logistics thinking is identified as a common theme in recently developed models, and further worked out. Furthermore, ideas on what might be the next key developments in freight transport modelling are presented.     

Social Impacts of Transport: Literature Review and the State of the Practice of Transport Appraisal in the Netherlands and the United Kingdom

Abstract

Transport appraisals in European countries increasingly address three dimensions of sustainability—economic, ecological and social. However, social impacts of transport have been underexposed in (ex‐ante) transport project appraisal, at least in the Netherlands. Firstly, this article presents a theoretical framework describing the relationships between determinants of social impacts of transport; it also provides a definition and categorization of those impacts. Secondly, the article reviews the state of the practice of national transport project appraisal in the Netherlands and the United Kingdom. The article shows that social impacts of transport investments can take on many forms and their levels of importance may vary widely, in project appraisal. The UK transport appraisal guidance includes a spectrum of social impacts through quantitative and qualitative assessments that is broader than the Dutch appraisal guidance. However, it does not cover the full range as identified in the literature. This holds, in particular, for the temporary impacts of transport investments, health impacts, social cohesion, the distribution and accumulation of impacts across population groups and social justice. All in all, it can be concluded that there is a long way to go before social impacts of transport projects are completely included in appraisals, in a way that allows us to compare them to economic and ecological effects.     

The expansion of the Panama Canal and its impact on global CO2 emissions from ships

As part of the discussions of the environmental effects of the expansion of the Canal through the construction of a third set of locks, the Panama Canal Authority (PCA) began to consider measuring the impact of the project on global CO₂ emissions in 2006. The hypothesis PCA intends to investigate whether the third set of locks will prompt reductions in total world CO₂ emissions or not. The Canal's third set of locks will prevent reaching the saturation point, and will avoid diversion of traffic to potentially longer alternative routes, such as the Suez Canal and Cape Horn, thereby reducing distances and fuel consumption. In addition, the widening of the Canal may promote the construction of modern-type post-Panamax vessels, making transportation of freight more efficient through economies of scale. This white paper will initiate an exploratory research on the subject based on two possible scenarios: an existing Canal and an expanded Canal. Both scenarios will take physical distances, closest alternative routes, as well as fuel consumption of vessels and other relevant modes of transportation into consideration.     

Impact of scale increase of container ships on the generalised chain cost

In recent years, an increase in the size of the container ships could be observed. The question is how these larger ships will influence the total generalised costs from a port of loading to a destination in the European hinterland. The second question is whether a scale increase of the container ships on other loops, such as a loop from the United States to Europe, has the same impact on the generalised chain costs as on the loop from Asia to Europe. A derived question is which element of the total chain has the highest importance, and whether this balance varies as the ship size changes. In this article, a model is developed that allows answering the above research questions. The model is designed to simulate the cost of a complete loop of a container ship and of a chain that uses that same loop. For the chain cost simulation, the maritime part is determined by the loop. From the ports of loading and unloading, the port container handling and the hinterland transportation costs are also integrated. The model also allows calculating the total chain cost from a point of origin (either a hinterland region or a port) to a destination point (also a port or a hinterland region). An actual container loop of a container shipping company can be introduced in the model. An application is made to two existing container loops, namely from Asia respectively the United States to Europe. It turns out that changing ship does indeed lead to economies of scale, but also that the impact is larger on the Asia–Europe connection than on the US–Europe connection. Furthermore, the maritime component has the biggest share in the total chain cost, but as ship size increases, the shares start getting closer to each other. This research contributes to the existing literature in two ways. First of all, it quantifies the impact of the scale increase of container ships throughout the total chain. Second, this is done from a bottom-up engineering modelling approach.