Bus Priority Using pre-signals

The need to provide efficient public transport services in urban areas has led to the implementation of bus priority measures in many congested cities. Much interest has recently centred on priority at signal controlled junctions, including the concept of pre-signals, where traffic signals are installed at or near the end of a with-flow bus lane to provide buses with priority access to the downstream junction. Although a number of pre-signals have now been installed in the U.K., particularly in London, there has been very little published research into their design, operation and optimisation. This paper addresses these points through the development of analytical procedures which allow pre-implementation evaluation of specific categories of pre-signals. The paper initially sets out three categories of pre-signal, which have different operating characteristics, different requirements for signalling and different impacts on capacity and delay. Key issues concerning signalling arrangements for these categories are then discussed, together with a summary of the analytical approach adopted and the assumptions required. Equations are developed to allow appropriate signal timings to be calculated for pre-signalised intersections. Further equations are then developed to enable delays to priority and non-priority traffic, with and without pre-signals, to be estimated with delay being taken here as the key performance criterion. The paper concludes with three application examples illustrating how the equations are applied and the impacts of pre-signals in different situations.The analyses confirm the potential benefits of pre-signals, where these signals apply to non-priority traffic only. Where buses are also subject to a pre-signal, it is shown that disbenefits to buses can often occur, unless bus detectors are used to gain priority signalling.     

车用柴油机电控开发系统的软,硬件设计及应用

本文研制了一种新的发动机电 控燃油系统的开发系统的微机测控系统。     

空调客车围护结构隔热设计方案比较研究

利用数值分析的方法，分析了空调客车非稳态情况下四种结构车厢体的二维温度场分布，计算了车厢体的二维传热损失和热桥附加传热损失。在骨架和内衬之间加一层隔热组织改善了车的隔热特性，为客车围护结构隔热优化提供了依据。     

碳纤维加劲塑料在桥梁工程中的应用

碳纤维加劲塑料（ＣＦＲＰ）是一种高强、轻质、耐腐蚀、耐疲劳的现代复合材料，随着人们对现代复合材料的不断研究、开发和认识，其在结构工程中的应用将日趋增多。尽管ＣＦＲＰ价格较贵，但若能有效利用其独特的性能，则其经济效益将是显著的。介绍ＣＦＲＰ材料的特点以及在桥梁工程中的几种应用途径。     

压实石灰黄土压缩特性试验研究

通过击实试验，获得了不同石灰掺量石灰黄土的最大干密度和最佳含水量。通过对不同压实度、石灰掺量和龄期的压实石灰黄土进行压缩试验，得到了各参数对压缩变形的影响规律及施工中选择依据。绘制出不同压实度石灰黄土的归一化压缩曲线，从而可方便地计算不同压实度石灰黄土路基的沉降。发现侧限割线模量和压力成正比，表明侧限压缩割线模量分析法适用于压实石灰黄土。给出了计算压实石灰黄土路基沉降的3种方法。     

采用不同方法处理山区高速公路软基的效果分析

以GZ40勉宁高速公路为例,采用抛石挤淤法、粉喷桩法、孔内深层强夯挤密法和冲填法对不同路段软基进行了处理,通过现场的静荷载试验和面波剖面测试对不同方法的处理效果进行了分析,同时对4种方法进行了社会经济效益评价。分析表明以上4种方法均可适用于山区公路软基处理,而其中孔内深层强夯挤密法处理效果较好,且具有施工方便、速度快、无污染、对周围环境影响小和工程造价低等优点,具有广阔的应用前景和推广价值。     

茅草街大桥368 m跨钢管拱肋制作与安装工艺介绍

介绍了茅草街大桥368m大跨径钢管拱肋制作、安装工艺.     

新型缓和曲线在基本型平面线形设计中的应用

在约束条件LC/LS=1下,推导了新型缓和曲线[1]在基本型平面线形设计中的计算公式,通过一个实例,展示了其应用效果.     

大城市社会公共停车场选址规划模型研究

在考虑交通系统总体效益的基础上，采用数学分析的方法对社会公共停车场的规划布局进行定量分析，提出基于广义费用最小的最优社会公共停车场选址模型，以确定城市内社会公共停车场的合理布局，使城市交通系统总体效益达到最优。     

瞄准交通强国建设新坐标 开启海南海事发展新征程

《交通强国建设纲要》(以下简称《纲要》)开宗明义,指出建设交通强国是以习近平同志为核心的党中央立足国情、着眼全局、面向未来作出的重大战略决策,是建设现代化经济体系的先行领域,是全面建成社会主义现代化强国的重要支撑,是新时代做好交通工作的总抓手。围绕着落实《纲要》,交通运输部海事局站在统筹和引领海事发展大局的高度,提出了以"五个一流"谱写新时代交通海事新篇章的发展思路,这为我们进一步学习领会和贯彻落实好交通强国建设的目标任务,推动和提升海事高质量发展提供了基本遵循和奋斗目标。