薄层环氧沥青混合料抗剪级配优化研究

依托桃夭门大桥钢桥面铺装大修工程实例， 对如何提高薄层环氧沥青混合料抗剪切性能进行了分析研究， 提出 EA-10_S-I中断级配设计方法， 并通过室内混合料抗剪性能试验、 路用性能检测和试验段铺装检测， 优化抗剪级配设计曲线。 研究结果表明优化 EA-10_S-I级配相对于传统 Fuller 密级配沥青混合料有更好的抗剪性能， 而疲劳耐久性则优于 FAC-10_优 级配。     

船舶柴油机调速器有限转角力矩电机优化控制

本文针对新型的船舶柴油机调速器有限转角力矩电机控制系统优化与稳定性问题,在Matlab/Simulink中基于电枢回路方程与力矩方程搭建有限转角力矩电机动态系统模型.通过数据拟合方法构建电机非线性模型,基于线性控制理论对串级PID控制系统进行稳定性分析,最后使用遗传算法对PID参数进行优化设计.研究成果可为该电机用于柴油机电子调速执行机构提供优化及控制参考.     

论岸电技术应用保障及规范管理

本文首先介绍了岸电技术应用背景现状及行业规范推广存在的问题.然后针对低压岸电技术安全、高效、便捷的应用推广规范化,从岸电低压供电制式、岸电电力传输、岸电电力连接接口三方面,进行了问题分析,提出了技术改造和规范管理的建议.     

浅谈综合工费对铁路隧道机械化施工经济性影响

为分析研究综合工费对大型机械钻爆法施工概算费用的影响,以3条新建双线铁路隧道项目数据为依托,核算出不同施工模式下的经济指标及工程费用;建立基期综合工费单价理论计算模型,计算出不同施工模式、不同围岩等级条件下新建铁路双线隧道临界综合工费单价。通过与普通钻爆法对比,大型机械钻爆法施工建造费用增长约10%;当基期综合工费高于226. 54元/工日时,大型机械钻爆法施工的经济性得以体现。     

无轴轮缘推进器电机与水力部件耦合优化设计研究

针对目前无轴推进器电机与水力部件设计时多未考虑两者耦合的问题,本文提出两者耦合的优化设计方法.采用多参数非线性优化方法,基于电机和导管螺旋桨设计理论公式,并考虑无轴推进器电机转子的直径等同于螺旋桨内径加上叶梢间隙,以及螺旋桨输出转矩加上间隙的摩擦转矩值作为电机输入转矩的关系,建立了一种新型优化设计模型,通过优化方法进行迭代分析,利用5.5 kW无轴推进器进行方法验证.研究结果表明,所提出的优化方法有效地考虑了无轴推进器电机与水力部件的耦合关系,可对推进器效率进行综合优化.     

Real-Time Fault Diagnosis for Gas Turbine Blade Based on Output-Hidden Feedback Elman Neural Network

In order to remotely monitor and maintain large-scale complex equipment in real time, China Telecom plans to create a total solution that integrates remote data collection, transmission, storage, analysis and prediction. This solution can provide manufacturers with proactive, systematic, integrated operation and maintenance service, and the data analysis and health forecasting are the most important part. This paper conducts health management for the turbine blades. Elman neural network, and improved Elman neural network, i.e., outputhidden feedback (OHF) Elman neural network are studied as the main research methods. The results verify the applicability of OHF Elman neural network.     

Dynamic Behavior of Two Part Towing Cable System During Turning

An improved numerical method is used to simulate the dynamic behavior of a two part towing cable systems during turnings. In U turns and full turns, periodical heave motions are found both for the towed vehicle and for the depressor. Periodic motions of the subsea units and of the cable surface tension are closely related to the turning parameters, such as turning velocity and turning radius. System parameters, such as length of the second cable and the vehicle hydrodynamics, also damp turning instability.     

Career development for women in maritime industry: organisation and socialisation perspectives

For centuries, the maritime industry has been a recognised place in society dominated solely by men, and even though there were women involved, they were mostly on the periphery. This research aims to fill the gap of women’s career development in this field, by investigating the relationships among the degree of organisational socialisation, women’s workplace culture, and the career development of women in the maritime workplace. The analyses are conducted with the structural equation model with 202 valid questionnaires. The results indicated that women’s workplace culture has a significantly negative relationship with the degree of organisational socialisation, and then in turn, it has a significantly positive relationship with women’s career development in the maritime industry. Finally, the results also indicate that the mediating effect of organisational socialisation existed between women’s workplace culture and women’s career development. According to the empirical analysis, this study makes conclusions as well as suggestions for the maritime enterprises as the reference for human resource management.