谋划浙江港口发展战略促进交通强国高质量发展

近十年来, 浙江省港口一直呈现快速发展态势, 沿海港口发展位居全球前列, 2019 年宁波舟山港吞吐量 11. 2 亿 t, 连续 11 年位居全球第一, 面对 “十三五” 乃至今后一段时期国际经济与港口发展的新形势, 在交通强国发展总体要求下, 浙江省港口呈现怎样的发展趋势、 采取何种发展战略和发展措施, 值得我们深入思考和探析。     

汽油发动机的尾气分析与应用

汽油发动机尾气中主要成份为HC、CO、CO2、NOX、O2等。本文分析了尾气的形成、特征和超标排放原因,以及尾气检测原理和标准,通过几例本人在工作中的实例,说明尾气检测在维修实践中所起到的重要作用,可供维修单位检测参考。     

电控转向系统直流电机实时故障诊断方法

作为电动助力转向系统和线控转向系统执行元件的电动机,其可靠运行对电控转向汽车的行驶安全至关重要.本文中通过建立永磁直流电机模型和运用带有遗忘因子的递推最小二乘法,提出了一种电控转向系统直流电机故障诊断方法.线控转向实车试验验证的结果表明,该方法可准确、实时地诊断直流电机故障,为电控转向系统的容错控制奠定基础.     

基于GOOSE机制的城市轨道交通中压环网继电保护方案优化

针对目前城市轨道交通中压环网继电保护存在的问题,提出了基于GOOSE(面向通用对象的变电站事件)机制的中压环网的继电保护优化方案,有效地解决了传统过流保护级差配合困难的问题.该方案是以GOOSE光纤以太网为基础,以闭锁逻辑为核心的数字通信电流保护方案.将GOOSE信号进行分类,并对中压供电环网系统各种可能出现的故障进行动作行为分析.最后,通过RTDS(动态数字仿真系统)仿真试验,证明该方案在各种故障情况下,都能保证继电保护的选择性、速动性、灵敏性和可靠性.     

Estimation of delay variability at signalized intersections for urban arterial performance evaluation

Urban arterial performance evaluation has been broadly studied, with the major focus on average travel time estimation. However, in view of the stochastic nature of interrupted flow, the ability to capture the characteristics of travel time variability has become a critical step in determining arterial level of service (LOS). This article first presents a stochastic approach that integrates classic cumulative curves and probability theories in order to investigate delay variability at signalized intersections, as a dominant part of the link travel time variability. This serves as a basis for arterial travel time estimation, which can be obtained through a convolution of individual link travel time distributions. The proposed approach is then applied in the estimation of travel time along one arterial in Shanghai, China, with abundant automatic vehicle identification (AVI) data sources. The travel time variability is evaluated thoroughly at 30-min intervals, with promising results achieved in comparison to the field measurements. In addition, the estimated travel time distributions are utilized to illustrate the probability of multiple LOS ranges, namely, reliability LOS. The results provide insights into how we might achieve a more reliable and informative understanding of arterial performance.     

Robust control for four-wheel-independent-steering electric vehicle with steer-by-wire system

A four-wheel-independent-steering (4WIS) electric vehicle (EV) with steer-by-wire (SBW) system is proposed in this paper. The fast terminal sliding mode controller (FTSMC) is designed for the SBW system to suppress external disturbances. Taking unstructured and structured uncertainties into consideration, a robust controller is designed for the 4WIS EV utilizing μ synthesis approach and the controller order reduction is implemented based on Hankel-Norm approximation. Since sideslip angle is the feedback signal of robust controller and it is hard to measure, the extended Kalman filter (EKF) is employed to estimate sideslip angle. To evaluate the vehicle performance with the designed control system, step and sinusoidal steering maneuvers are simulated and analyzed. Simulation results show that the designed control system have good tracking ability, strong robust stability and good robust performance to improve vehicle stability and handing performance.     

约束对隧道二次衬砌早期温度应力分布的影响

为了解决隧道工程渗水问题,基于某隧道工程,采用MIDAS-GEN对其二次衬砌早期模筑混凝土进行非稳定温度应力场以及周围约束进行研究。研究结果表明:约束可以改变隧道的早期拉应力场的分布,具有外围约束的隧道二次衬砌的拉应力为隧道厚度中间最大,无约束隧道的拉应力为外部最大,约束可以减小隧道外部区域的拉应力,使得远离约束区域的拉应力变大,而无约束隧道的拉应力分布与之相反。根据温度应力分布特点,建议在设计方面适当增大二次衬砌中间与外侧的配筋,在施工方面减小初期支护与二次砌衬之间约束等。     

Modelling,simulation and applications of longitudinal train dynamics

ABSTRACT

Significant developments in longitudinal train simulation and an overview of the approaches to train models and modelling vehicle force inputs are firstly presented. The most important modelling task, that of the wagon connection, consisting of energy absorption devices such as draft gears and buffers, draw gear stiffness, coupler slack and structural stiffness is then presented. Detailed attention is given to the modelling approaches for friction wedge damped and polymer draft gears. A significant issue in longitudinal train dynamics is the modelling and calculation of the input forces – the co-dimensional problem. The need to push traction performances higher has led to research and improvement in the accuracy of traction modelling which is discussed. A co-simulation method that combines longitudinal train simulation, locomotive traction control and locomotive vehicle dynamics is presented. The modelling of other forces, braking propulsion resistance, curve drag and grade forces are also discussed. As extensions to conventional longitudinal train dynamics, lateral forces and coupler impacts are examined in regards to interaction with wagon lateral and vertical dynamics. Various applications of longitudinal train dynamics are then presented. As an alternative to the tradition single wagon mass approach to longitudinal train dynamics, an example incorporating fully detailed wagon dynamics is presented for a crash analysis problem. Further applications of starting traction, air braking, distributed power, energy analysis and tippler operation are also presented.     

基于发动机台架考核方法的气缸盖高周疲劳特性研究

依据发动机台架考核规范,运用疲劳强度理论,对某铸铁气缸盖进行高周疲劳强度评估。明确温度和应力随考核工况改变的变化行为,研究气缸盖各区域受工作载荷的影响状况,为缸盖寿命评估模型提供载荷边界。结合疲劳理论,在考虑材料修正的基础上进行了疲劳特性分析和损伤状况分析。分析表明,气缸盖各区域的疲劳安全系数均大于1,视为安全,但冷却钻孔区域的安全裕度较小。