抑制制动器振动噪声的阻尼方法的探讨

针对在盘式制动器制动块底板上粘贴一层阻尼层(Insulating Shim)的阻尼处理方法，首先指出制动块底板上阻尼层的减振机制在于粘弹性材料在接触面间表现出的摩擦作用，尤其取决于材料本身的迟滞效应。然后．定量分析了阻尼层对制动器噪声的抑制效果；利用能量等效原理将接触摩擦转换成系统中粘性阻尼后进行特征分析．考察系统稳定性。     

具有模块化结构的汽车动力学仿真模型的初步研究

初步探讨了面向开发型驾驶模拟器的具有模块化结构的汽车动力学仿真模型建立方法，从而可以在此基础上进一步建立一套通用的面向结构的汽车动力学仿真程序，便捷地在开发型驾驶模拟器上实现对不同类型或同类型不同结构车辆性能的仿真。     

轿车前梁有限元分析

利用轿车前梁的CATIA模型建立其有限元模型。通过前悬架的ADAMS模型确定前梁的受力。应用这些方法将CAD、CAE有机的结合在一起，提高了有限元分析的效率和准确性。为了检验模型的精确程度，对前梁进行了静态加载试验。结果表明计算和试验结果有很好的一致性。     

基于神经网络的半主动悬架自适应模糊控制

提出了基于神经网络的自适应模糊控制策略。模糊控制主要用来对付系统的非线性；神经网络根据振动响应的方差递推结果来辨识车体的振动情况实时调节模糊控制器的量化因子，使模糊控制器对路面的变化具有自适应的能力。在半主动悬挂1／4车非线性模型的基础上进行了仿真研究。     

汽车急加速噪声信号分析

汽车急加速噪声信号属于短时非平稳信号，在探讨各种时频分析方法的基础上，找到了一种适合于急加速噪声信号的处理方法——短时最大熵谱方法，这将有利于急加速噪声问题的进一步深入研究。     

基于发码分区的码序表工程设计浅析

作为验证列控中心编码正确性的依据.码序表在电务仿真试验阶段起着至关重要的作用。本文结合工程设计实际情况,从发码分区角度入手,对码序表设计进行简要的描述。     

基于多元回归方法的海洋执法船主尺度分析

为分析海洋执法船主尺度之间的变化规律,对海洋执法船的发展趋势进行了介绍,并对其相关船型数据资料进行整理分析。采用多元回归的数学方法,建立了基于多变量的海洋执法船主尺度数学模型,有利于对海洋执法船主尺度的变化规律进行分析与掌握,为海洋执法船的报价设计与初步设计提供一定的科学依据。     

Key technologies of ship remote control system in inland waterways under ship-shore cooperation conditions北大核心CSCD

［Objective ］ To meet the requirements of remotely controlling ship in curved, narrow and crowded inland waterways, this paper proposes an approach that consists of CNN-based algorithms and knowledge based models under ship-shore cooperation conditions. ［Method］On the basis of analyzing the characteristics of ship-shore cooperation, the proposed approach realizes autonomous perception of the environment with visual simulation at the core and navigation decision-making control based on deep reinforcement learning, and finally constructs an artificial intelligence system composed of image deep learning processing, navigation situation cognition, route steady-state control and other functions. Remote control and short-time autonomous navigation of operating ships are realized under inland waterway conditions, and remote control of container ships and ferries is carried out. ［Results］The proposed approach is capable of replacing manual work by remote orders or independent decision-making, as well as realizing independent obstacle avoidance, with a consistent deviation of less than 20 meters. ［Conclusions］The developed prototype system carries out the remote control operation demonstration of the above ship types in such waterways as the Changhu Canal Shenzhou line and the Yangtze River, proving that a complete set of algorithms with a CNN and reinforcement learning at the core can independently extract key navigation information, construct obstacle avoidance and control awareness, and lay the foundation for inland river intelligent navigation systems. © 2022 Journal of Clinical Hepatology. All rights reserved.     

Dynamic simulation of train–truck collision at level crossings

Trains crashing onto heavy road vehicles stuck across rail tracks are more likely occurrences at level crossings due to ongoing increase in the registration of heavy vehicles and these long heavy vehicles getting caught in traffic after partly crossing the boom gate; these incidents lead to significant financial losses and societal costs. This paper presents an investigation of the dynamic responses of trains under frontal collision on road trucks obliquely stuck on rail tracks at level crossings. This study builds a nonlinear three-dimensional multi-body dynamic model of a passenger train colliding with an obliquely stuck road truck on a ballasted track. The model is first benchmarked against several train dynamics packages and its predictions of the dynamic response and derailment potential are shown rational. A geometry-based derailment assessment criterion is applied to evaluate the derailment behaviour of the frontal obliquely impacted trains under different conditions. Sensitivities of several key influencing parameters, such as the train impact speed, the truck mass, the friction at truck tyres, the train–truck impact angle, the contact friction at the collision zone, the wheel/rail friction and the train suspension are reported.     

现代造船模式与船舶工业集群化发展的思考

现代造船模式的推广是把我国船舶工业建设成为先进制造业的关键。而集群化发展则是近年来我国船舶工业发展的一大趋势。船舶工业的集群化发展大大提高了造船产业链上各相关企业的专业化分工和合作水平,带来了显著的产业集群效应。推广现代造船模式使造船企业、配套企业以及相关机构形成了十分紧密的相互合作、相互补充、共同发展的关系,极大地促进了船舶工业的集群化发展。因此,必须基于现代造船模式的要求,来制定我国船舶工业集群化发展的策略。