港口体系职能结构的定量分析方法和实证研究

以长株潭港口体系为例,运用区位商和分工系数指标对长株潭港口体系职能结构动态变化特征和港口专业化发展趋势进行了定量分析,可供长株潭经济一体化下的港口规划参考。该定量分析方法也可推广应用于其他港口体系。     

塑料板排水法在软土地基处理中的应用

本文结合实际工程,并根据工程现场试验实测资料,用不同方法推算软土地基的最终沉降量和固结度。通过比较分析,采用三点法推算软土地基最终沉降量是可行的。通过对采用塑料板排水堆载预压后的固结沉降计算和沉降规律的分析,达到验证设计、指导施工的目的。     

Novel coordinated algorithm for Traction Control System on split friction and slope road

A Traction Control System (TCS) is used to avoid excessive wheel-slip via adjusting active brake pressure and engine torque when vehicle starts fiercely. The split friction and slope of the road are complicated conditions for TCS. Once operated under these conditions, the traction control performance of the vehicle might be deteriorated and the vehicle might lack drive capability or lose lateral stability, if the regulated active brake pressure and engine torque can’t match up promptly and effectively. In order to solve this problem, a novel coordinated algorithm for TCS is brought forward. Firstly, two brake controllers, including a basic controller based on the friction difference between the two drive wheels for compensating this difference and a fuzzy logic controller for assisting the engine torque controller to adjust wheel-slip, are presented for brake control together. And then two engine torque controllers, containing a basic PID controller for wheel-slip control and a fuzzy logic controller for compensating torque needed by the road slope, are built for engine torque control together. Due to the simultaneous and accurate coordination of the two regulated variables the controlled vehicle can start smoothly. The vehicle test and simulation results on various road conditions have testified that the proposed method is effective and robust.     

Effects of split injection,oxygen enriched air and heavy EGR on soot emissions in a diesel engine

The effects of split injection, oxygen enriched air, and heavy exhaust gas recirculation (EGR) on soot emissions in a direct injection diesel engine were studied using the KIVA-3V code. When split injection is applied, the second injection of fuel into a cylinder results in two separate stoichiometric zones, which helps soot oxidation. As a result, soot emissions are decreased. When oxygen enriched air is applied together with split injection, a higher concentration of oxygen causes higher temperatures in the cylinder. The increase in temperature promotes the growth reaction of acetylene with soot. However, it does not improve acetylene formation during the second injection of fuel. As more acetylene is consumed in the growth reaction with soot, the concentration of acetylene in the cylinder is decreased, which leads to a decrease in soot formation and thus soot emissions. A combination of split injection, a high concentration of oxygen, and a high EGR ratio shows the best results in terms of diesel emissions. In this paper, the split injection scheme of 75.8.25, in which 75% of total fuel is injected in the first pulse, followed by 8°CA of dwell time, and 25% of fuel is injected in the second pulse, with an oxygen concentration of 23% in volume and an EGR ratio of 30% shows a 45% reduction in soot emissions, with the same NOx emissions as in single injection.     

Trip misreporting forecast using count data model in a GPS enhanced travel survey

As Global Positioning System (GPS) technology advances, it has been increasingly used to supplement traditional self-reported travel surveys due to its promising features in capturing travel data with better accuracy and reliability. Realizing the limitations of diary-based surveys, this paper presents a study that directly accounts for trip misreporting behavior in trip generation models. Travel data were obtained from prompted-recall assisted GPS survey along with a diary-based survey. Negative Binomial models for count data were developed to accommodate misreporting behavior by introducing interaction effects of the sample-indicator variable with various personal and household variables. The interaction effects indicate how the impacts of the socioeconomic and demographic variables on trip-making vary across the two samples. Assuming that the GPS sample represents the ground truth, the interaction effects actually capture the likelihood and the extent of trip misreporting by detailed personal and household characteristics. The model results reveal significant interaction effects of several personal and household variables, indicating misreporting behavior associated with these attributes. The addition of interaction coefficients to the main effect model represents the real impacts of the independent variables, after compensating for trip misreporting behavior, if any.     

Long-term trends in domestic US passenger travel: the past 110 years and the next 90

Based upon a long-term historical data set of US passenger travel, a model is estimated to project aggregate transportation trends through 2100. One of the two model components projects total mobility (passenger-km traveled) per capita based on per person GDP and the expected utility of travel mode choices (logsum). The second model component has the functional form of a logit model, which assigns the projected travel demand to competing transportation modes. An iterative procedure ensures the average amount of travel time per person to remain at a pre-specified level through modifying the estimated value of time. The outputs from this model can be used as a first-order estimate of a future benchmark against which the effectiveness of various transportation policy measures or the impact of autonomous behavioral change can be assessed.     

Scattering of oblique surface water waves by thin vertical barrier over undulating bed topography

The present study deals with the scattering of oblique surface water waves by small undulation on the bottom in the presence of a thin vertical barrier. Here, three different configurations of vertical barriers are investigated. Perturbation analysis is employed to determine the physical quantities, namely, the reflection and transmission coefficients. In this analysis, many different Boundary Value Problems (BVPs) are obtained out of which the first two bvps are considered. The zeroth order bvp is solved with the aid of eigenfunction expansion method. The first order reflection and transmission coefficients are derived in terms of the integrals by the method of the Green’s integral theorem. The variation of these coefficients is plotted and analyzed for different physical parameters. Furthermore, the energy balance relation, an important relation in the study of water wave scattering, is derived and checked for assuring the correctness of the numerical results for the present problem.     

All minutes are not equal: travel time and the effects of congestion on commute satisfaction in Canadian cities

Despite decades of research, it is unclear under which circumstances travel is most onerous. While studies have found that some individuals derive positive utility from aspects of commuting, others have shown that traffic congestion can entail important time, monetary, and mental stress costs. Moreover, responses to traffic congestion-related stressors differs by individual characteristics. In response, this research captures how exposure to traffic congestion events, the duration of this exposure, and individual trait susceptibility to congestion affect the utility of commuting. Working through the lens of individual satisfaction with the duration of their commute, we show that not every minute of travel is valued the same by car commuters in Canadian cities. Results suggest a complex relationship between travel time, congestion, and individual predisposition to congestion-related stress. While improvements in travel time matter for increasing commute satisfaction, it is reductions in travel in congested conditions that matter most, particularly among those susceptible to congestion-related stressors.     

Enhancing the Efficiencies of Organic Photovoltaic and Organic Light-Emitting Diode Devices by Regular Nano-Wrinkle Patterns

Organic photovoltaic (OPV) cells and organic light-emitting diodes (OLEDs) are energy harvesting and generation devices that have attracted great attention these years because of their low costs, thin film structures, flexibility and environment-friendly manufacturing processes. For such thin film devices, photon management methods that increase the light absorption of OPV cells and the light extraction from OLEDs are highly desirable. Here, we report the experimental efforts to fabricate geometrically tunable and spontaneously formed nano-wrinkle structures with large areas, and the theoretical results on photon management with the nano-wrinkles.     

Real-time Monitoring of Subsea Gas Pipelines,Offshore Platforms,and Ship Inspection Scores Using an Automatic Identification System

The aim of this research is to develop an algorithm and application that can perform real-time monitoring of the safety operation of offshore platforms and subsea gas pipelines as well as determine the need for ship inspection using data obtained from automatic identification system (AIS). The research also focuses on the integration of shipping database, AIS data, and others to develop a prototype for designing a real-time monitoring system of offshore platforms and pipelines. A simple concept is used in the development of this prototype, which is achieved by using an overlaying map that outlines the coordinates of the offshore platform and subsea gas pipeline with the ship’s coordinates (longitude/latitude) as detected by AIS. Using such information, we can then build an early warning system (EWS) relayed through short message service (SMS), email, or other means when the ship enters the restricted and exclusion zone of platforms and pipelines. The ship inspection system is developed by combining several attributes. Then, decision analysis software is employed to prioritize the vessel’s four attributes, including ship age, ship type, classification, and flag state. Results show that the EWS can increase the safety level of offshore platforms and pipelines, as well as the efficient use of patrol boats in monitoring the safety of the facilities. Meanwhile, ship inspection enables the port to prioritize the ship to be inspected in accordance with the priority ranking inspection score.