船用往复泵管路减振技术研究

船舶往复式水泵管路振动一直是国内有待解决的难题，本文在分析往复式舱底泵管路振动产生机理的基础上，针对往复式水泵管路振动特性，运用近年来研制的一些新型管路减振元件，如袖套式挠性接管、管路消振器、管路流体压力蓄能器等，对往复式水泵管路振动进行试验研究，为管路减振设计提供了有意义的参考依据。     

Application of new parameterizations of gas transfer velocity and their impact on regional and global marine CO2 budgets

One of the dominant sources of uncertainty in the calculation of air–sea flux of carbon dioxide on a global scale originates from the various parameterizations of the gas transfer velocity, k, that are in use. Whilst it is undisputed that most of these parameterizations have shortcomings and neglect processes which influence air–sea gas exchange and do not scale with wind speed alone, there is no general agreement about their relative accuracy.The most widely used parameterizations are based on non-linear functions of wind speed and, to a lesser extent, on sea surface temperature and salinity. Processes such as surface film damping and whitecapping are known to have an effect on air–sea exchange. More recently published parameterizations use friction velocity, sea surface roughness, and significant wave height. These new parameters can account to some extent for processes such as film damping and whitecapping and could potentially explain the spread of wind-speed based transfer velocities published in the literature.We combine some of the principles of two recently published k parameterizations [Glover, D.M., Frew, N.M., McCue, S.J. and Bock, E.J., 2002. A multiyear time series of global gas transfer velocity from the TOPEX dual frequency, normalized radar backscatter algorithm. In: Donelan, M.A., Drennan, W.M., Saltzman, E.S., and Wanninkhof, R. (Eds.), Gas Transfer at Water Surfaces, Geophys. Monograph 127. AGU,Washington, DC, 325–331; Woolf, D.K., 2005. Parameterization of gas transfer velocities and sea-state dependent wave breaking. Tellus, 57B: 87–94] to calculate k as the sum of a linear function of total mean square slope of the sea surface and a wave breaking parameter. This separates contributions from direct and bubble-mediated gas transfer as suggested by Woolf [Woolf, D.K., 2005. Parameterization of gas transfer velocities and sea-state dependent wave breaking. Tellus, 57B: 87–94] and allows us to quantify contributions from these two processes independently.We then apply our parameterization to a monthly TOPEX altimeter gridded 1.5° × 1.5° data set and compare our results to transfer velocities calculated using the popular wind-based k parameterizations by Wanninkhof [Wanninkhof, R., 1992. Relationship between wind speed and gas exchange over the ocean. J. Geophys. Res., 97: 7373–7382.] and Wanninkhof and McGillis [Wanninkhof, R. and McGillis, W., 1999. A cubic relationship between air−sea CO2 exchange and wind speed. Geophys. Res. Lett., 26(13): 1889–1892]. We show that despite good agreement of the globally averaged transfer velocities, global and regional fluxes differ by up to 100%. These discrepancies are a result of different spatio-temporal distributions of the processes involved in the parameterizations of k, indicating the importance of wave field parameters and a need for further validation.     

A Mathematical Model of a Ship with Wings Propelled by Waves

This paper discusses mathematical modeling of a ship equipped with energy-saving wing devices. Therewith, the ship is mathematically represented by an elongated...     

自动驾驶中座椅旋转速度对乘员的影响

为提高自动驾驶车辆的安全性,提出用一种旋转速度曲线把座椅旋转至指定角度,研究此旋转速度下的乘员生物力学响应.首先,根据所建立的碰撞模型与假人试验数据进行对比验证;其次,改变座椅旋转方向和速度研究乘员旋转至指定位置乘员的生物力学响应.结果表明:在200 ms内采用等腰梯形旋转速度曲线旋转至±45°和±90°不会引起乘员额...     

正交异性组合桥面构造优化

正交异性组合桥面由于其较好的抗疲劳性能和静力承载能力、相对较轻的自重近年来在实际工程中得到较多应用。正交异性组合桥面通常由正交异性钢板和混凝土层组成,在加入混凝土层后结构刚度发生较大变化,若正交异性板仍采用传统正交异性钢桥面的构造形式将会造成不必要的钢材用量和焊接量增加。采用遗传算法,以单位面积造价最小为目标,结合现有规范考虑了构造约束和承载能力约束两类约束条件,采用两种应力控制方案,对不同桥面板跨度和混凝土厚度的正交异性组合桥面的构造进行优化。同时解决了构造改变导致荷载分配改变对承载能力分析造成的影响。优化结果表明,桥面跨度4.5m时,与未优化组合桥面相比,优化方案用钢量可降低1.7%~10.1%,焊接量可降低16.5%~31.8%。     

基于数据驱动的电动汽车动力电池SOC预测

为准确预测电动汽车动力电池的能耗,缓解驾驶者的里程焦虑,本文中提出一种基于数据驱动的电动汽车动力电池SOC预测模型.首先分析电动汽车能耗构成并提取能耗影响因素,接着基于某款电动出租车CAN总线采集的汽车运行数据,采用机器学习算法,提出基于温度分层的能耗模型,通过宏观数据与微观数据的融合减小误差,最后使用该模型对车载BM...     

冷藏集装箱监测系统的现状与发展趋势

本文分析了冷藏集装箱的现状并在冷藏集装箱监测系统需求分析的基础上,针对目前冷藏集装箱监控系统的缺点,提出了未来冷藏集装箱监测系统的发展趋势。     

Modelling and Analysis of Turning Motion of a Subsurface Mapping AUV with Split-Hull Design

There is much need for autonomous underwater vehicles (AUVs) for inspection and mapping purposes. Most conventional AUVs use torpedo-shaped single-rigid hull, b...     

四连杆式独立悬架运动学分析与优化

四连杆式悬架是技术比较先进的悬架形式。可以从设计上保证车辆良好的直线行驶性能并最大程度减轻载荷的影响。建立了四连杆式悬架多刚体系统模型并对车轮定位参数等特性进行仿真,运用多目标函数的最优化方法对悬架的结构参数进行优化。并将优化前后的车轮定位参数运动学特性进行对比,说明进行悬架结构参数的优化对于提高悬架性能的重要作用。     

Fault diagnosis for singular stochastic systems

This paper studies the fault diagnosis of singular stochastic systems. The probability distribution of output is measured by probability density functions (PDFs), which are modeled by a square root B-spline expansion. An adaptive nonlinear observer is proposed to estimate the size of the fault occurring in systems. Furthermore, the linear matrix inequality (LMI) approach is applied to establish sufficient conditions for the existence of the observer. Finally, the simulation results are given to indicate the method for diagnosing the fault.