回收粉在环氧沥青混凝土中的应用研究

大跨径钢桥面铺装用环氧沥青混凝土对集料有很高的要求。通过室内试验和实际生产验证。分析环氧沥青混凝土生产中使用回收粉的可行性，并结合具体工程给出使用量。     

横浪海况下"蓝鲸"号起重船吊装上部组块运动响应研究

"蓝鲸"号起重船舶在海上吊装大型上部组块施工过程中,有时受现场条件限制,会出现横浪吊装作业工况,此时组块运动容易偏大,威胁作业的安全,甚至造成设备损坏和人员伤亡事故.本文针对横浪-系泊系统-起重船-吊缆-上部组块复杂耦合系统,开展了数值模拟研究工作,分析吊装组块的运动响应规律和特性.将规则波中运动响应预报结果与水池模型试验结果进行了对比分析,验证了数值模拟的合理性及其精确性,揭示了起重船和吊物的耦合运动机理.针对典型横浪不规则波工况,开展了运动响应预报,并和Noble Denton相关衡准进行了对比,给出了允许施工作业工况的建议.     

舰艇编队信息融合中模糊C-均值算法改进研究

在分析舰艇编队信息处理融合的基础上,提出舰艇编队信息融合体系结构、模型和实现框架。针对原C-均值算法在处理数据时的不合理性,提出了改进的模拟C-均值算法,提高分类效果,满足信息融合的实时要求和可靠性要求。     

基于FPGA的单端行波故障测距系统的设计与实现

针对现有的10 k V输电线单端行波故障测距理论,提出了一种基于Cyclone IV系列FPGA芯片EP4CE15F17C8N的软硬件实现方案。采用FPGA自顶向下模块化思想,设计了行波故障测距系统,采用AD7356进行高速数据采集,通过改进的凯伦鲍尔矩阵进行相模变换,用FIR滤波器IP核进行小波变换求模极大值,最后根据模极大值的极性选择测距公式计算故障距离。通过时序仿真和板级测试表明,该方案设计时序稳定,且定位精度高、实时性强。     

反激变换器电流连续和断续的比较研究

根据单端反激变换器的电路和工作波形,推导了其在输出电流连续和不连续情况的工作原理,并且给出了在MATLAB/Simulink中的正激变换器的仿真模型和仿真结果。通过对仿真结果的分析得出以下结论:其优点是电路所用元器件少,电路简洁。其缺点如下:输出功率较小,稳定性较差,以及开关应力大,电路能量损耗较大。     

基于LiDAR点云的船载砂石体积自动测算系统

针对现有船舶运输砂石体积计算主要依赖人工方式称重和纸质运单流转、精度不高且效率很低的难题，采用基于八叉树的点云精简和聚类分析进行复杂环境下船舶点云的自动识别和提取；采用基于改进SK-4PCS （semantic-keypoint-based 4-points congruent sets）的粗配准和基于Point-to-Plane ICP （iterative closest point）的精配准进行空载和满载两期点云由粗到精的高效配准，设计实现了一种利用LiDAR （light detection and ranging）点云数据进行船载砂石自动测算的系统. 采集了江西南昌赣江运砂船数据进行实验验证，从扫描到出结果一艘船的砂石体积自动测算时间少于2 min，同船多次测算结果最大相对误差小于1.00%，砂石体积与实际真值相比的最大误差小于2.00%，满足实际业务需求.      

Two degree of freedom flow-induced vibration of cylindrical structures in marine environments: frequency ratio effects

The flow-induced vibration of a cylindrical structure is a very common problem in marine environments such as undersea pipelines, offshore risers, and cables. In this study, the vortex-induced vibration (VIV) of an elastically mounted cylinder at a low Reynolds number is simulated by a transient coupled fluid–structure interaction numerical model. Considering VIV with low damping ratio, the response, hydrodynamic forces, and vortex shedding modes of the cylinder is systematically analyzed and summed up the universal rule under different frequency ratios. On the basis of the analysis, we find that the frequency ratio α is a very important parameter. It decides the locked-in, beat, and phase-switch phenomena of the cylinder, meanwhile, it also influence the vortex mode of the cylinder. The trajectory of the two degrees of freedom (2 DOF) case at different natural frequency ratios is discussed, with most trajectories having a “figure of 8” shape and a few having a “crescent” shape. A fast Fourier transformation technique is used to obtain the frequency characteristics of the vibration of the cylindrical structure. Using the 2 DOF cylinder model in place of the 1 DOF model presents several advantages in simulating the nonlinear characteristics of cylindrical structures, including the capacity to model the crosswise vibration generated by in-line vibration.     

Optimal concession contracts for landlord port authorities with different pursuing goals

This paper investigates how landlord port authorities should offer concession contracts to their terminal operators under two different goals, by building a two-stage game for each goal. If maximizing the weighted sum of fee revenues and throughout benefits is port authorities’ goal, then the optimal concession contract can be any of the two-part tariff, the unit-fee, and the fixed-fee contracts. Accordingly, our special cases include previous works assuming that port authorities maximize either fee revenues or throughput benefits. By contrast, if maximizing the social welfare is the goal, then we find that subsidizing terminal operators, instead of charging them, is port authorities’ best choice. This result is not yet discovered in the literature.     

无轴轮缘推进器电机与水力部件耦合优化设计研究

针对目前无轴推进器电机与水力部件设计时多未考虑两者耦合的问题,本文提出两者耦合的优化设计方法.采用多参数非线性优化方法,基于电机和导管螺旋桨设计理论公式,并考虑无轴推进器电机转子的直径等同于螺旋桨内径加上叶梢间隙,以及螺旋桨输出转矩加上间隙的摩擦转矩值作为电机输入转矩的关系,建立了一种新型优化设计模型,通过优化方法进行迭代分析,利用5.5 kW无轴推进器进行方法验证.研究结果表明,所提出的优化方法有效地考虑了无轴推进器电机与水力部件的耦合关系,可对推进器效率进行综合优化.     

一种基于卫星导航的列车初始定位方法研究

在西北环境恶劣地区,线路区间往往较少设置实体应答器,列车在区间重启时需要长距离低速运行.经过实体应答器后才能确定列车位置。针对该问题.本文提出一种基于卫星导航系统和车载电子地图的列车初始定位方法。该方法利用轨道约束算法和概率学方法,设计满足铁路安全标准要求的列车初始定位方法。