基于VxWorks的PCI设备驱动程序开发

对嵌入式实时系统VxWorks中的设备驱动程序开发进行了简要的介绍，讨论了VxWorks操作系统下的I／O系统和设备驱动程序、应用程序之间的关系。另外，结合作者开发PCI9054时统卡驱动程序的实际，讨论了VxWorks下PCI设备驱动程序的框架，并详细介绍了各个模块的具体实现。     

半刚性基层沥青路面低温收缩开裂性能研究

通过对沥青路面结构温度场和沥青路面低温开裂的形成机理研究,指出沥青路面的低温开裂有低温收缩、温度梯度开裂两种主要形式,其中温度梯度开裂是沥青路面低温开裂的主要原因。文章较详细地分析路面低温开裂的机理和类型。     

JK00430型机车走行部车载检测装置在内燃机车上的运用分析

介绍了JK00430型机车走行部车载检测装置的运用,提出了该装置发生报警后的科学处理办法。     

支持向量机在地铁车站深基坑围护结构变形预测的应用

利用支持向量机理论对深基坑支护结构的变形量进行分析和预测,建立了预测支护结构最大变形量的支持向量机预测模型。预测结果表明,该预测模型有很高的预测精度,并应用于南京市某地铁站实际工程。     

Development of Green-Naghdi models with a wave-absorbing beach for nonlinear, irregular wave propagation

Two-dimensional and three-dimensional Green-Naghdi (GN) models equipped with a numerical wave-absorbing beach have been developed to simulate nonlinear, regular, and irregular wave propagation. The numerical beach is introduced near the downstream boundary to absorb outgoing waves. An appropriate amount of numerical damping and an appropriate length of numerical beach are investigated using numerical experiments. The results show that the GN models with a numerical beach work very well in simulating wave propagation in water in a small computational domain.     

APPLICATION OF HMB－45 MONOCLONAL ANTIBODY AND S100 PROTEIN IN THE IMMUNOHISTOCHEMICAL DIAGNOSIS OF MELANOMA

ＡＰＰＬＩＣＡＴＩＯＮＯＦＨＭＢ－４５ＭＯＮＯＣＬＯＮＡＬＡＮＴＩＢＯＤＹＡＮＤＳ１００ＰＲＯＴＥＩＮＩＮＴＨＥＩＭＭＵＮＯＨＩＳＴＯＣＨＥＭＩＣＡＬＤＩＡＧＮＯＳＩＳＯＦＭＥＬＡＮＯＭＡＬｉｕＤａｎｙａ（刘丹亚）；ＳｕＢａｏｓｈａｎ（苏宝山）；Ｘｕ...     

合成脂肪酸废水的厌氧处理

对合成脂肪酸废水首先采用氧化钙处理，使其浓度降低到３０００ｍｇ／Ｌ以下，再采用中温厌氧生物处理。在平均水力停留时间为５天时，废水的ＣＯＤＣｒ去除率达７９．１％，沼气产率为０．４１ＮＭ３／ｋｇＣｏＤＣｒ试验还发现，的存在失使厌氧发酵的ｐＨ值上升。     

三菱FV系列车离合器系统修复后的排气作业

在维修FV系列车过程中，离合器控制油路拆卸、修理、安装后，要对离合器系统进行注油和排气作业，即从离合器助力器排气螺栓排出空气。该车的排气作业不仅仅需要很多工时，而且严重影响修理效率。在详细分析该车型离合器系统的结构和工作原理的基础上，提出了一种高效的排气作业方法。     

Dynamic Simulation of a Smart Crank and Slider Mechanism

In this paper, a smart crank and slider mechanism is analyzed mostly from a dynamic view. By means of dynamic explicit finite element method, 3D nonlinear structure is simulated. It is proved that the mechanism can effectively accomplish smart movement prescribed. And in order to ensure reciprocal movement with higher frequency, measures should be taken to avoid over heating of parts. Compared with internal energy, kinetic energy of total rigid body is dominating, and Y direction equivalent rigid velocity is much higher than X direction velocity. Equivalent rigid velocity of all parts is consistent with respective movement condition. For both energy and velocity, slider effect is dominating. Three direction equivalent inertia force oscillates. Force amplitude in Y -direction is comparitively the greatest.     

基于Multigen Creator和Vega的"数字校园"演示系统开发

为了展示武汉大学美丽的校园风貌 ,充分利用我校新近引进的虚拟现实系统 ,开发了一个“数字校园”演示系统 ,实现了虚拟现实表现的基本功能。介绍了该演示系统的有关技术细节 ,包括系统构成、数据处理流程和应用软件的二次开发技术等