Design research of gravity retaining wall based on limit state design methodEI北大核心

Research purposes: Gravity retaining wall limit state design research is based on the design research of retaining structure limit state of open-cut foundation with the lateral earth pressure supported by wall body weight. This paper sums up the research thought of gravity retaining wall and analyzed their main calculation results, which provides reference for the open-cut foundation retaining structure design research of cantilever retaining wall, counterfort retaining wall, groove type retaining wall and so on. Research conclusions: (1) The steps for design research of the gravity retaining wall limit state are to establish a limit state equation, to calculate reliability index and determine the target reliability index, calculate partial coefficient and set up the design expression. (2) The most critical factor influencing gravity retaining wall limit state is comprehensive internal friction angle. (3) There are different function calculations and different design conditions for the gravity retaining wall in the current specification, their underlying reliability index is different, the corresponding partial coefficient should also be different. (4) The research conclusion can be used to guide the design of gravity retaining wall, which provides the reference to the design research of other open-cut foundation retaining structure.     

Dynamic system‐optimal traffic assignment for a city using the continuum modeling approach

This paper presents a continuum dynamic traffic assignment model for a city in which the total cost of the traffic system is minimized: the travelers in the system are organized to choose the route to their destinations that minimizes the total cost of the system. Combined with the objective function, which defines the total cost and constraints such as certain physical and boundary conditions, a continuum model can be formulated as an optimization scheme with a feasible region in the function space. To obtain an admissible locally optimal solution to this problem, we first reformulate the optimization in discrete form and then introduce a heuristic method to solve it. This method converges rapidly with attractive computational cost. Numerical examples are used to demonstrate the effectiveness of the method. Copyright © 2013 John Wiley & Sons, Ltd.     

Method to simplify ship outfitting and offshore plant equipment three-dimensional (3-D) computer-aided design (CAD) data for construction of an equipment catalog

The construction of an equipment catalog is necessary in ship outfitting and offshore plant design. We investigated the present status of equipment catalogs in shipyards and revealed several requirements for the catalogs, which are manually created and time-consuming. We defined the requirements by analyzing the construction procedure of the equipment catalog and conducted interviews with shipyard employees. In addition, problems with conventional equipment catalog construction are described, and a new procedure for the construction of an equipment catalog is introduced. By analyzing shipyard requirements, criteria for simplification (including volume, ports, and the outer boundary) are defined. Further analysis of technological factors for simplification is performed, and the results of implementing the simplification system are described. The proposed system is verified using three test cases used on site.     

Thermal anaysis of an electric water pump for internal combustion engine vehicles

An electric water pump for engine cooling system has an advantage which particularly in the cold start, the use of the electric water pump saves fuel and leads to a corresponding reduction in emissions. However, the electric water pump for internal combustion engine generates much more heat loss than that for hybrid electric vehicle or electric vehicle since it is operated by electric power of high current and low voltage. In this study, the fluid flow and thermal characteristics of the canned type electric water pump with an inverter integrated has been investigated under the effects of heat generation. The analysis conditions such as outdoor air temperature of 125°C, water pump speed of 6000 rpm, coolant temperature of 106°C and coolant flow rate of 120 L/min were used as a standard condition. Therefore, the thermal performance of the canned type electric water pump’s motor and inverter was evaluated by comparison with that of mechanical seal type. In the motor, the temperature reduced by over 10°C, and in the inverter, the amount of temperature decrease equaled to the maximum temperature difference, about 18.7°C. Also, canned type electric water pumps of variable materials were compared for the evaluation of thermal transfer performance for variable thermal conductivity of a can. The motor and inverter were cooled lower to 42°C at motor and about 40°C at inverter for reasonable selection of can’s thermal conductivity.     

Study on the performance of active front steering system

The performance of a steering system equipped with active front steering (AFS) device is investigated with the consideration of AFS intervention and a proposed dynamic model. Firstly, the kinematics and dynamics of AFS are illustrated based on the mechanism of AFS with planetary gear set and a detailed dynamic model. Furthermore, a basic control on the voltage of DC motor at AFS actuator is proposed. It is realized by a proportional controller that the input is the difference of desired steering ratio and a conventional gear ratio. Finally, two numerical simulations are carried out. One is on-center handling test to demonstrate the basic characteristics of AFS. The other simulation is to demonstrate the effects of vehicle speed, frequency of steering input and AFS intervention on steering system performance. It is shown that the proposed AFS dynamic model is capable to simulate dynamic performance of AFS. The effect of AFS intervention on turning efforts at hand steering wheel is inevitable and the turning comfort is deteriorated to some extent.     

Improved hot-stamping analysis of tubular boron steel with direct measurement of heat convection coefficient

There are two types of hot-stamping processes, direct and indirect, depending on the sequence of the heating, forming, and quenching steps and the method used for each step. In this study, an indirect hot-stamping process consisting of forming at room temperature, heating, and water quenching was applied to develop a coupled torsion beam axle. The analysis results indicated that the application of the heat convection coefficient is critical in the simulations and must take into account the temperature and specific location in the model to ensure the accuracy of the heating and quenching analysis. The heat convection coefficients used in the analysis were directly measured at various positions of the tube (e.g., outside, inside, and bending region) using thermocouples, and the final values were determined through correlation between the actual tests and numerical analysis. The experimental and simulated final deformed shape and temperature distribution were in good agreement.     

Fatigue life estimation of injection mold core using simulation-based approach

The purpose of this study is to present a simulation-based approach capable of predicting the fatigue life of a mold core with the help of CAE technology based on injection molding simulation, core stress analysis and fatigue life prediction. Injection molding simulation is performed in order to obtain the non-uniform pressure acting on a mold core due to the polymer melt flow during injection molding process. Subsequently, the melt pressure profile is used as loading condition for core stress analysis via one-way coupling technique. The lifetime of a mold core is then predicted by fatigue analysis with stress-life approach. For verification of simulation-based approach to the fatigue life prediction, tests were also performed.     

Development of estimation algorithms for vehicle’s mass and road grade

In controlling the longitudinal motion of electrified vehicles such as hybrid vehicles and PHEV (Plug-in Hybrid Electric Vehicles), the variation of the driving resistance loads (or driving loads) such as road grade and actual vehicle mass, is the most influential factor which limits the control performance. Measuring the driving load is not impossible, but it is costly since additional sensors have to be mounted on the vehicle. In this study, methods for estimating vehicle mass and road grade are designed to compensate for the driving loads. The proposed methods are verified using simulation tools and then evaluated experimentally.     

Highly reliable driving workload analysis using driver electroencephalogram (EEG) activities during driving

Traffic accidents are caused by various factors, which can be classified into human factors, vehicle factors and environmental factors. Recently, human factors have been drawing particular attention as efforts are being made to enhance the safety performance of vehicles and improve road conditions. Driving distraction caused by an increased driving workload is a representative human factor. Various studies in the past have attempted to quantify the driving workload by using EEG activities. However, they have failed to consider vibration properties generated from vehicle engines. A number of noise signals were included in brainwave signal processing, which resulted in a failure to obtain reliable outcomes. Thus, this study suggests driver EEG activities free of vehicle engine secondary vibration in order to develop a method that analyzes the driving workload with high statistical reliability. By using the analytical method developed in this study, standard values of driving workload for straight and left-turn driving that has statistical significance could be calculated. The analytical method for driving workload created by this study can be applied to HVI and road design.