浅谈公路桥梁养护管理存在弊端及建议

文章说明了目前公路桥梁养护管理中存在的一些问题,针对存在问题提出了合理的建议。     

锚杆扩大基础支挡结构在山区公路中的应用

提出在特殊地形地质路段采用锚杆扩大基础的支护设计理念,针对重力式挡墙介绍锚杆扩大基础的结构设计方法与稳定性分析步骤。相对于常规的衡重式或重力式连体基础,锚杆扩大基础在使用性能与工程造价上均占有明显的优势,作为地形地质复杂山区公路的特殊支挡结构具有良好的应用前景。     

薄壁高墩大跨连续刚构桥地震时程反应参数研究

运用大质量法,建立并推导了长大跨度桥梁考虑行波效应的分析模型及解析方程。以内蒙古小沙湾黄河特大桥为工程背景,选取墩身刚度、地震波视波波速、地震波激励方向等主要参数,建立动力计算模型,对该桥上述各种参数工况下地震时程反应作了参数对比分析研究。利用分析结果,探讨了同类桥梁在各种参数变化情况下墩顶位移和墩底内力的变化规律。     

基于最优理论的CVT多片湿式离合器片间压力的确定

利用最优理论和方法,结合湿式离合器的特点,提出无级变速器湿式离合器接合过程中摩擦片间最佳压力的确定方法。仿真结果表明,相对于基于线性压力的控制方法,基于最优理论确定的摩擦片间压力能较好的解决无级变速器湿式离合器接合过程中滑磨功和冲击度之间的矛盾,实现了汽车的平稳快速起步。     

Simulation of mixed gas formation for a spray-wall complex guided LPG direct injection engine

To obtain an ultralean air-fuel ratio and to reduce engine-out NOX and HC emissions induced by the richer mixture near the spark plug, a spray and wall complex guided combustion system has been developed by utilizing the fuel characteristics of LPG. The new combustion system configuration is optimized by using a commercial CFD code, FIRE V2013, and the reliability of the system has been experimentally demonstrated by Plane Laser-Induced Fluorescence (PLIF). The mixture formation in the new combustion system under part load (2,000 rpm) is numerically simulated. With an injection timing of 40°CA BTDC, the LPG spray which is injected from two upper holes, reaches the ignition point, and the other part of the LPG spray which is injected from the bottom hole, is directed to the ignition point through the vertical vortices at the same time. At the ignition timing of about 20°CA BTDC, the two-part mixtures have been shown to form a stable and richer stratified mixture around the ignition point, and the maximum global air-fuel ratio reaches to 60: 1.     

Robust control for four-wheel-independent-steering electric vehicle with steer-by-wire system

A four-wheel-independent-steering (4WIS) electric vehicle (EV) with steer-by-wire (SBW) system is proposed in this paper. The fast terminal sliding mode controller (FTSMC) is designed for the SBW system to suppress external disturbances. Taking unstructured and structured uncertainties into consideration, a robust controller is designed for the 4WIS EV utilizing μ synthesis approach and the controller order reduction is implemented based on Hankel-Norm approximation. Since sideslip angle is the feedback signal of robust controller and it is hard to measure, the extended Kalman filter (EKF) is employed to estimate sideslip angle. To evaluate the vehicle performance with the designed control system, step and sinusoidal steering maneuvers are simulated and analyzed. Simulation results show that the designed control system have good tracking ability, strong robust stability and good robust performance to improve vehicle stability and handing performance.     

Effective method for knock signal denoising in internal combustion engine

Uncontrolled expansion of combustion wave in spark ignited internal combustion engine causes knock effect which seriously degrades efficiency and lifetime of the engine. Thus, accurate knock detection and control are essential for obtaining a desired performance from the engine. Usually, knock sensor is used to detect this phenomenon but it has limited accuracy especially at engine high-speed rotations because of natural vibration and external noises. In this study an effective method based on Non-Local Mean (NLM) algorithm has been proposed to improve the knock detection accuracy. This method is evaluated based on four different indicators and four engine cylinders. The results show 52.9 % improvement in knock detection. Also feasibility of real time execution of this method based on embedded hardware has been studied.     

试验条件对车辙试验影响的研究

鉴于沥青混合料车辙试验对车辆重载、超载、大坡度沥青路面适用的局限因素,即对超载、超高温,坡度等因素考虑不足等原因,依据沥青及沥青路面时间等温效应,在分析剪切作用对沥青混合料车辙影响的基础上,研究了不同试验条件对沥青混合料车辙试验的影响,得出了车辙试验结果与温度、荷载、坡度、冻融循环等条件间关系.     

Nonlinear three-dimensional wagon-track model for the investigation of rail corrugation initiation on curved track

A nonlinear wagon-track model on curved track has been developed to characterize rail corrugation formation due to self-excitation of the wheel-rail stick-slip process. In this model, wagon movements were described using up to 78 degrees of freedom (DOFs) to model a three-piece freight bogie. Innovatively, the wheelset movements are described using nine DOFs, including torsional and bending modes about the longitudinal and vertical directions. The track modelling is considered as a one-layer structure (two rail beams on discrete spring and damper elements). The wheel sliding after creepage saturation is considered in the wheel-rail interface modelling. Simulation of a case study shows that the frequencies of the wheel stick-slip process are composed of the basic frequency, which might come from the combined effect of sleeper-passing frequency and one-third of the combined torsional and bending frequency of the wheelset, and the double and triple basic frequencies, which form the wavelengths of rail corrugation at different situations.     

混合动力车辆控制策略研究

针对某串联混合动力装甲车,建立了以燃油消耗最小化为目标的最优控制模型,应用动态优化算法对问题进行求解.选择某重型车辆典型城郊工况CYC-CSHVR进行仿真分析,并将结果与恒温式控制策略的结果作比较,结果表明动态规划算法的燃油经济性比恒温式有较大提高.最后根据仿真分析,得到该串联混合动力装甲车的发动机输出功率与需...