Structural Optimization and Strength Analysis of the Lifting Arm of a Wet Shotcrete Spraying Unit北大核心CSCD

Wet shotcrete spraying units are widely used in underground engineering, for railways, highways, water conservancy and hydropower stations, municipal works, mining and military and other industries. Structural analysis and mechanical behavior optimization are conducted regarding the lifting arm of a TKJ series shotcrete spraying unit, and optimization of the hinge point position and working scope of the lifting arm is realized. The optimal layout scheme for the hinge force is given based on the Monte Carlo method, the hinge force of the lifting arm is improved for the mean and maximum values, and the maximum and average hinge force of the lifting cylinder decrease by 23.14% and 7.70%, respectively, compared with that of the original scheme. The static strength is checked using Ansys-Workbench for the optimized scheme, and the results show that the optimized scheme has a larger safety re-serve and that the structural design is more reasonable than the original scheme. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Experimental Study on Mechanical Behaviors of Prefabricated Column-Base Joint with Grouted Sleeves Connecting Longitudinal Reinforcements in Tunnels北大核心CSCD

In recent years, large shield tunnels with internal double-decked lanes have been developing rapidly in the field of highway tunnels, and prefabricated elements are increasingly adopted in internal structure. Based on the columns-base joint in Zhuguanglu tunnel, which is under construction, 2 full-scale specimens are designed for the quasi-static test, one specimen is connected with grout sleeve splicing and the other is cast in place. The test results show that: the bearing capacity of specimen with grout sleeve splicing is equal to that of cast-in-situ specimen, but its ductility and energy dissipation capacity are worse than that of the cast-in-situ specimen. And for the specimen with grout sleeve splicing, there exists crack concentration on the area above the sleeve. The crack width is too larger in this area. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis of the Circulation System of a Slurry Shield and the Muck Carrying Ability of a Dredging Pipe北大核心CSCD

The circulation system of a slurry shield is composed of a transportation system and a processing system.For shield construction, correct selection of the circulation system for the slurry shield is directly related to construc-tion speed. Using the Nanjing Yangtze tunnel as an example, the material balance calculation of the circulation sys-tem, sieving effect analysis, and analysis of the muck carrying ability of the dredging pipe are conducted for various strata. The practical results show that above mentioned calculations and analysis method provide a good reference for the proper selection of a slurry separation system and dredge pipe. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis on the Effects of Overloading on the Mechanical Properties of Tunnel Structures in the Silty Ground --A Case Study of Sutong River-crossing GIL Utility Tunnel北大核心CSCD

Based on the Sutong GIL utility tunnel project, which is constructed by the shield machine under the river, and as for the overloading problem at the river bank slope during operating period, the refined threedimensional finite element model was established to study the deformation and cracking characteristics of the tunnel segment structure under different forms of overloading. The evolution laws of section convergence, joint opening and structural stress were analyzed, and the structure damage mechanisms were revealed under conditions of large area loading and local loading. The surface-surcharge control standard was proposed. For the big diameter shield tunneling crossing the silty clay, the research results show that: (1) the deformation failure process is divided into three stages under large area loading condition, taking the design load and compressive yield of rebars inside haunch as the critical points respectively. The first stage is characterized by the elastic stress, the second stage is in plastic state with fracture, and the third stage is accelerating deformation and instability stage. The vertical convergence is 110.5 mm with no opening of joints when rebars are yielded; (2)the deformation failure process under local loading condition is also divided into elasticity, plasticity and instability stages, taking the design load and tensile yield of rebars outside haunch as the critical points respectively. The vertical convergence is 152.6 mm with joint opening of 4.36 mm; (3) the early-warning values of additional stress on the ground under conditions of large area loading and local loading are 110 kPa and 70 kPa respectively. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

A Study of Prevention Techniques for Tunnel Lining Defects北大核心CSCD

Defects of tunnel lining, such as inadequate thickness, voids, cracks, rock falling and water leakage etc., endanger the safety of railway tunnel operation. Based on the site construction, an analysis of the reasons for lining defects was conducted; technical measures against lining defects were proposed and tests were carried out at site. The results show that these measures are reliable and effective, and the purposes of prevention and treatment are re⁃ alized. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

基于石墨烯的柔性薄膜电极进展

石墨烯具有诸多优异的物理、化学特性,在电化学储能领域得到了广泛的关注。本文综述了石墨烯薄膜以及石墨烯复合材料薄膜在锂离子电池以及超级电容器柔性电极中的应用进展。根据石墨烯在柔性电极中作用的不同分为三个部分结合研究实例分别论述,并对石墨烯基薄膜电极材料在柔性电化学储能器件中的应用前景进行了分析和展望。     

全固态锂离子电池的研究进展

本文着重介绍了固态电解质的特性,包括聚合物电解质、氧化物电解质、硫化物电解质;分析了固态电池的应用现状,指出了固态锂电池技术未来的发展趋势。     

A two-phase model for dry port location with an application to the port of Dalian in China

This paper provides guidance for an optimal and reasonable dry port layout for the port of Dalian in China. We present a two-phase framework on the location of dry ports, which solves the selection of candidate inland cities and optimal dry port location choice, respectively. Fuzzy C-Means Clustering is applied to select alternative cities in the vast hinterland of the seaport of Dalian, with a view to identify evaluation factors that affect the location selection decision. A cost-minimisation linear programming solution is proposed, with the aid of a genetic algorithm, to choose the optimal location as well as capacity level among the candidate inland cities.     

Exploring airline passengers’ willingness to pay for carbon offsets

This study examines airline passengers’ willingness to pay for carbon-offsets. Using the contingent valuation method of double-bounded dichotomous choice format and a survey of over 1000 Taiwanese passengers flying to countries in Asia, Europe, North America, and Oceania to gauge their willingness-to-pay for airline carbon-offsets. The results suggest that despite the trip characteristics and personal background, air travel passengers’ knowledge and perceptions of the carbon-offset scheme also greatly influence the stated willingness to pay.     

隧道内爆炸作用衬砌结构的动力响应和损伤机理研究

隧道内爆炸作用可能导致其衬砌结构的破坏和坍塌,造成车辆通行受阻和生命财产损失。为了研究隧道衬砌结构的抗爆性能,应用AUTODYN软件建立了隧道衬砌-岩石-土壤的三维数值模型,并考虑炸药-空气-结构的流固耦合相互作用,以及隧道内爆炸作用对衬砌结构的动力响应和损伤机理进行了数值模拟分析。结果表明:在不同炸药量作用下,超压峰值及冲量以爆心地面投影点为中心,向四周迅速衰减,表现出一定的规律性;离爆心最近的底板首先出现损伤,并向四周扩展,直墙角部由于受到底板竖向变形而引起的拉应力作用,较早地出现损伤,在直墙壁和拱顶产生纵向和环向的裂缝,这些裂缝把整体式隧道衬砌结构分割成大小不等的混凝土块体。