Vibration reduction of H/Shaft using an electromagnetic damper with mode change

The objective of this study is to develop a damper that can reduce the amplitude of vibration in various frequency ranges. Previous H/Shaft vibration reduction methods work in a passive way. A dynamic damper reduces the amplitude of vibration at its first mode, but vibration still appears at the second mode. A mass damper or hollow shaft can shift the natural frequency to a lower or higher region. The fixed operating frequency prevents vibration from being reduced outside the operating frequency range. The proposed damper uses electromagnets as either masses or actuators to change the damper mode between dynamic damper mode and mass damper mode. The electromagnetic damper (EMD) can change its mode to respond to the vibration excitation at both low and high frequencies. The vibration reduction performance was evaluated by FRF tests in laboratory and vehicle conditions. The results were compared with those of a dynamic damper and indicate that the amplitude of vibration is reduced by 95.6 % when the EMD is implemented on an H/Shaft, whereas only 61.9 % vibration reduction is achieved by the dynamic damper.     

Integrated approach to an optimal automotive timing chain system design

Ensuring engine efficiency is a crucial issue for automotive manufacturers. Several manufacturers focus on reducing the time taken to develop and introduce brand new vehicles to the market. Thus, a synergic approach including various simulations is generally adopted to achieve a development schedule and to reduce the cost of physical tests. This study involved proposing a design process that is very useful in the preliminary development stage through effective support from simulations. This type of simulation-based design process is effective in developing timing chain drives; the use of this process, based on results from multiple trials, showed improvements in performance including low friction and vibration, improved durability, and cost-effective part design when compared to conventional processes. This study proposes an integrated approach to the preliminary design of an automotive timing chain system. The approach involves structural and dynamic analyses. The details of the design process are described by using the case of a virtual engine. This study conducted and summarized a dynamic and structural analysis as well as topological optimization to describe a process to obtain optimal results. The results of this study indicated the following improvements in overall performance factors: 12.1 % improvement in transmission error, 10.1 % reduction in chain tension, 46 % reduction in tensioner arm weight, and 11 % reduction in transversal displacement.     

A tyre slip-based integrated chassis control of front/rear traction distribution and four-wheel independent brake from moderate driving to limit handling

This paper presents a tyre slip-based integrated chassis control of front/rear traction distribution and four-wheel braking for enhanced performance from moderate driving to limit handling. The proposed algorithm adopted hierarchical structure: supervisor – desired motion tracking controller – optimisation-based control allocation. In the supervisor, by considering transient cornering characteristics, desired vehicle motion is calculated. In the desired motion tracking controller, in order to track desired vehicle motion, virtual control input is determined in the manner of sliding mode control. In the control allocation, virtual control input is allocated to minimise cost function. The cost function consists of two major parts. First part is a slip-based tyre friction utilisation quantification, which does not need a tyre force estimation. Second part is an allocation guideline, which guides optimally allocated inputs to predefined solution. The proposed algorithm has been investigated via simulation from moderate driving to limit handling scenario. Compared to Base and direct yaw moment control system, the proposed algorithm can effectively reduce tyre dissipation energy in the moderate driving situation. Moreover, the proposed algorithm enhances limit handling performance compared to Base and direct yaw moment control system. In addition to comparison with Base and direct yaw moment control, comparison the proposed algorithm with the control algorithm based on the known tyre force information has been conducted. The results show that the performance of the proposed algorithm is similar with that of the control algorithm with the known tyre force information.     

Schlieren,Shadowgraph, Mie-scattering visualization of diesel and gasoline sprays in high pressure/high temperature chamber under GDCI engine low load condition

Three visualization methods, Schlieren, Shadowgraph, and Mie-scattering, were applied to compare diesel and gasoline spray structures in a constant volume chamber. Fuels were injected into a high pressure/high temperature chamber under the same in-cylinder pressure and temperature conditions of low load in a GDCI (gasoline direct injection compression ignition) engine. Two injection pressures (40 MPa and 80 MPa), two ambient pressures (4.2 MPa and 1.7 MPa), and two ambient temperatures (908 K and 677 K) were use. The images from the different methods were overlapped to show liquid and vapor phases more clearly. Vapor developments of the two fuels were similar; however, different liquid developments were seen. At the same injection pressure and ambient temperature, gasoline liquid propagated more quickly and disappeared more rapidly than diesel liquid phase. At the low ambient temperature and pressure condition, gasoline and diesel sprays with higher injection pressures showed longer liquid lengths due to higher spray momentum. At the higher ambient temperature condition, the gasoline liquid length was shorter for the higher injection pressure. Higher volatility of gasoline is the main reason for this shorter liquid length under higher injection pressure and higher ambient temperature conditions. For a design of GDCI engine, it is necessary to understand the higher volatility of gasoline.     

Performance Design of an Exhaust Superheater for Waste Heat Recovery of Construction Equipment

Although fuel cost has been the largest portion of annual operating costs of construction equipment, it is possible to save the energy and reduce cost using fuel economy enhancement technology. In this study, an organic Rankine cycle is applied to an excavator in order to recover waste heat, reproduce it into electrical energy, and consequently reduce the fuel consumption by 10 %. A design process was carried out to develop an exhaust gas superheater that recovers the waste heat from exhaust gas through a composite-dimensional thermal flow analysis. A one-dimensional code was developed to perform a size design for the exhaust gas superheater. The ranges for the major design parameters were determined to satisfy the target of the heat recovery, as well as the pressure drop at both fluid sides. Performance analysis was done through onedimensional design code results, which were compared with three-dimensional CFD analysis. By utilizing a 3D commercial code, the arrangement of the tubes was selected and the working fluid pressure drop was reduced through a detailed layout design. The design procedure was verified by a performance evaluation of the prototype, which yielded only a 7 % tolerance in heat recovery.     

Detection of Cognitive and Visual Distraction Using Radial Basis Probabilistic Neural Networks

This paper suggests a real-time method for detecting a driver’s cognitive and visual distraction using lateral driving performance measures. The algorithm adopts radial basis probabilistic neural networks (RBPNNs) to construct classification models. In this study, combinations of two driving performance data measures, including the standard deviation of lane position (SDLP) and steering wheel reversal rate (SRR), were considered as measures of distraction. Data for training and testing the RBPNN models were collected under simulated conditions in which fifteen participants drove on a highway. While driving, they were asked to complete auditory recall tasks or arrow search tasks to create cognitively or visually distracted driving periods. As a result, the best performing model could detect distraction with an average accuracy of 78.0 %, which is a relatively high accuracy in the human factors domain. The results demonstrated that the RBPNN model using SDLP and SRR could be an effective distraction detector with easy-to-obtain and inexpensive inputs.     

福建长乐高丽王祖墓考

在福建长乐有一个从很早流传下来的高丽王祖墓的故事.高丽王祖墓位于长乐资寿寺后面的利充山上,即今天鹤上镇北山村的闽山公园.元朝王宜星成了高丽国王忠宣王的养子.后来,忠宣王去世后,因他没有儿子,王宜星就继承了高丽王位.但是高丽王祖墓的故事是和历史事实不符的历史虚构物.这样的故事,可能是因为长乐王氏和高丽国之间的交流关系而产生的.     

弯曲分汊河段桥区通航水流条件及通航孔调整净宽分析*

建设于弯道、分汊的通航环境复杂河段的老旧桥梁在部分水情下海事安全风险较高。为研究调整通航孔对提高此类老旧桥梁通航安全性的作用,以赣江丰城公路大桥为例,建立全长14.7 km的二维水流数学模型,对下游龙头山航电枢纽运行前后洪、中、枯各级流量下河道水流特性、桥孔内和桥区通航水流条件进行计算与分析,并按照规范方法论证桥梁净宽尺度及其调整的可行性。研究成果可为类似弯曲分汊河段老旧桥梁通航环境改善提供借鉴。     

西江长洲枢纽库尾段采砂工程对航道通航水流条件的影响

西江航道桂平航运枢纽—长洲水利枢纽之间存在约34 km的水位未衔接段,而大藤峡水利枢纽建设选取的江口料场位于长洲枢纽库区回水末端和上游附近滩段。为研究库尾段采砂工程对上游通航水流条件的影响,须同步考虑上游来水和下游库区回水的变化,建立桂平三江口上游黔江河段16 km和桂平枢纽—长洲枢纽约156 km的长河段二维水流数学模型,分析采砂工程对航道通航水流条件的影响。结果表明,采砂工程实施后上游桂平航运枢纽引航道水位降落0.09 m,布岭沙弯道凸岸侧边滩挖除引起主流一定左偏。整体上,除设计流量外,库尾段采砂工程对航道水流条件影响较小。     

New method for predicting full-scale power performance of pumpjet propulsion system based on statistical learning北大核心CSCD

[目的]针对“适配于螺旋桨的船尾线型+泵喷推进器”构成的船舶泵喷推进系统,提出一种基于统计学习的实船快速性预报新方法。[方法]以某大型水面船舶泵喷推进系统为对象,通过神经网络学习典型推进泵的推力系数图谱曲线,综合运用船-桨配合时的K_(T)-J曲线和船体-喷泵配合时的推力特性曲线,建立“仅需船舶阻力曲线就能实现船舶泵喷推进系统实船快速性预报”的新方法,并基于船模阻力试验、泵喷模型敞水试验及船体-泵喷自航试验的测量换算结果对实船推进性能的预报结果开展精度校验。[结果]校验结果表明:在航速18~30 kn范围内,船舶泵喷推进系统的自航转速、推力和功率的预报误差可控制在5.4%以内,其中设计航速附近的误差甚至小于2%;船体-泵喷的相互作用程度介于船-桨与船体-喷泵之间且幅值相对较小,推力减额系数为趋向于0的极小值,故船舶泵喷推进系统是介于桨轴推进系统和喷水推进系统之间的产物。[结论]该预报方法有利于提升船舶泵喷推进系统实船快速性预报的能力,可为新型舰艇泵类推进系统总体设计/研究提供参考。