Influence of compliance for an elastokinematic model of a proposed rear suspension

The research is carried out to improve passenger’s comfort to increase the vehicles stability in dynamic conditions. The literature available in the automotive engineering considers different topics for studying suspensions. An example represents mechanisms structure and analysis (synthesis, kinematics, and dynamics) under various operating conditions. These aspects have been approached before analytically, numerical. The current paper studies the influence of the lateral force on the contact patch of the wheel and the corresponding variations of vehicle stability parameters, such as camber angle and wheel rear track. The study is performed for a newer innovative rear suspensions mechanism which does not have a wheel track and camber angle variation, relative to the chassis, when the suspension components was considered rigid. A numerical solution is obtained through a virtual model on several commercial codes: MSC Adams, Patran, Nastran. Concerning the analysed parametes, their variation increases as the applied force is increased. Moreover, the largest variation corresponds to the case were elastic bushings and deformable links are considered.     

Calculation of Transient Stress Field During Laser Transformation Hardening Process

IntroductionHighpowerCOzlaserssdsetransformationhardeningtechniquehasbeensuccessfullyusedinindusnyforWYears.BecausethetemPeratUrefleldislocalizedinmaterialdurllglasertransfonnationhMngProcess,highthermstrCsswillgenerateinmatgrialduringlasertfansformationhardeningProcess.Therisalsohighresidualstressinmaterial,bothintCnsionandcomPression['-'].ComPressresidualstressishelptoincreasethefatigueldrimeofthelasertreatedmaterial,butthetensilestresswillshortenthefatiguelifetmeofthelasertreatedmator…     

Computer Simulation of Thermal-Mechanical Processing

AlterationIntroductionThereisastrongini6ractionamongtemPetalrefield,strCssfield,andmicrosttuctutulaltOrationinm8terialsduringtheirhotworking[l'2].Especiallyduringthecoolingprocess,inwhichtemPeratorechangnsgreatly,intendionsbecomemorecomplexbecauseoftransformationoccurmnce.Duringthehotdeformation,thingswillaPpearsuchas:a.hotdeformation,relatedtostressfieId,changesessentiallytheshaPeofmaterialsandcausesthevariationofthecontactstatebetWeenthedieandsample,resultinginchangeofthethermalboundnyco…     

Influence of load and inflation pressure on the tyre rolling resistance

Tyre load and inflation pressure are important factors controlling rolling resistance of road vehicles. The article presents results obtained in the Technical University of Gdańsk during laboratory and road measurements of different car tyres rolling on different pavements. The knowledge of rolling resistance characteristics is important for modelling car dynamics as well as fuel consumption. It is also necessary to establish proper test conditions in the future standardized on-road method of measuring rolling resistance. The results indicate that while an increase of load always leads to the increase of rolling resistance force, the influence on Coefficient of Rolling Resistance is more complicated and unpredictable. They also indicate that tyres with high rolling resistance are more sensitive to inflation pressure changes than low rolling resistance tyres.     

Implementation of discharging/charging current sensorless state-of-charge estimator reflecting cell-to-cell variations in lithium-ion series battery packs

This paper offers novel insights to the design and implementation of an innovative state-of-charge (SOC) estimator for the lithium-ion (Li-Ion) series battery pack. The most interesting feature of this approach is that it can utilize information from each filtered terminal voltage of the Li-Ion cells connected in series for SOC estimation of the battery pack. Without actual sensing each discharging/charging current (DCC) applied to the Li-Ion cells, it is possible to extract each DCC estimation from the corresponding filtered terminal voltages with an equivalent electrical circuit model (EECM) identification of all Li-Ion cells in the battery pack. There are two advantages to SOC estimation of the battery pack with this approach. First, the proposal can be implemented simply and effectively, reducing the computational steps required for SOC estimation. By reducing computational steps, the proposal is expected to be more cost-effective. Second, the approach guarantees an improved SOC performance, even if the battery pack results in inevitable cell-to-cell variation among Li-Ion cells. Accordingly, there are fewer differences to previously estimated DCCs among Li-Ion cells. Specifically, all values from the estimated DCCs are properly compensated for by simultaneous parameter modification according to each cell’s electrochemical characteristics. Experimental results clearly demonstrate that our DCC sensorless SOC estimator provides robust SOC performance for the battery pack. This approach considered an experimental battery pack (12S1P) connected in series using 2.6 Ah LiCoO2 cells produced by Samsung SDI.     

Effect of rear slant angle on vehicle crosswind stability simulation on a simplified car model

It is important to know the effect of the aerodynamic forces and moments on driving stability because it is responsible for the excitation and influences the response of the vehicle. The purpose of this paper is to study the effect of rear slant angle of a surface vehicle on crosswind sensitivity for stability analysis. The vehicle mathematical model used to conduct a dynamic simulation was based on a simple reduced order lateral dynamics of sideslip and yaw rate motion coupled with aerodynamics model. The intention here is to compare the effect of rear slant angles response to crosswind and to rank the crosswind sensitivity ratings. The aerodynamic loads are defined as the function of the aerodynamic derivatives from the static wind tunnel tests. Result shows a 20° rear slant angle demonstrates the highest rating of crosswind sensitivity, while zero degree slant exhibits the least.     

Activity patterns,time use,and travel of millennials: a generation in transition?

Millennials, defined in this study as those born between 1979 and 2000, became the largest population segment in the United States in 2015. Compared to recent previous generations, they have been found to travel less, own fewer cars, have lower driver’s licensure rates, and use alternative modes more. But to what extent will these differences in behaviour persist as millennials move through various phases of the lifecycle? To address this question, this paper presents the results of a longitudinal analysis of the 2003–2013 American Time Use Survey data series. In early adulthood, younger millennials (born 1988–1994) are found to spend significantly more time in-home than older millennials (born 1979–1985), which indicates that there are substantial differences in activity-time use patterns across generations in early adulthood. Older millennials are, however, showing activity-time use patterns similar to their prior generation counterparts as they age, although some differences – particularly in time spent as a car driver – persist. Millennials appear to exhibit a lag in adopting the activity patterns of predecessor generations due to delayed lifecycle milestones (e.g. completing their education, getting jobs, marrying, and having children) and lingering effects of the economic recession, suggesting that travel demand will resume growth in the future.     

One city,three models: comparison of land‐use/transport policy simulation models for Dortmund

The paper reports on simulation experiments conducted by the International Study Group on Land‐Use/Transport Interaction (ISGLUTI) for the metropolitan region of Dortmund in the Federal Republic of Germany. Three land‐use/transport simulation models were applied to the Dortmund region: the DORTMUND model developed at the University of Dortmund, the LILT model being used at University College London and the MEPLAN package developed by Marcial Echenique & Partners in Cambridge. The three models are briefly characterized and their ex‐post forecasts are compared with the actual development of the region. The final section of the paper compares how the three models respond to a common set of assumptions and policies from the fields of land‐use control, traffic management and transport investment. The differences in model response give insights into the validity of the theoretical foundations and internal structure of the models.     

Energy conservation and intercity freight transport

In this paper, the characteristics of intercity freight modal operations are investigated to evaluate the potential for achieving energy savings. It is determined that the greatest opportunities for conserving energy appear to rest with achieving modal shifts and operational improvements in truck and rail transport. To test this hypothesis, intercity truck and rail freight operations are analyzed to determine the relationships between energy consumption and the delivery of transport service. The energy consumption impact of alternative conservation measures are calculated, and in turn, evaluated in light of a series of institutional constraints. As such, this study goes beyond the characteristic cataloging of alternative energy conservation measures by conducting a disaggregated assessment of the effectiveness and feasibility of implementing such measures. This paper concludes that the potential for achieving energy conservation in the movement of intercity freight in general, and by truck and rail systems in particular, is limited, as well as shrouded by the complexity of the nature of the commodity itself, the commodity flow characteristics, and the market and institutional structure.