Effect of nozzle orifice diameter on diesel spray tip penetration according to various spray models for CFD simulation with widely varying back pressure

CFD simulations of spray tip penetration with the standard KIVA3V, ‘original gas jet’ and ‘Normal gas jet profile with breakup length formula’ (NGJBL) spray models were performed to investigate the effects of nozzle orifice size and ambient gas density combinations on the spray penetration. The accuracy of the CFD simulation results was estimated by comparing them with available experimental data. The ambient gas density was varied in 12 kg/m³ intervals from 12 to 69 kg/m³ for each nozzle orifice diameter. The nozzle orifice diameters used were 119, 140, 183 and 206 mm. A total of 20 cases in the CFD simulations were considered with combinations of the 4 nozzle orifice diameters and 5 ambient gas densities. CFD simulations with the NGJBL spray model were more accurate than those with either the standard KIVA3V or gas jet spray models as the nozzle orifice diameter and ambient gas density was increased. The NGJBL and original gas jet model is more effective in predicting the spray tip penetration near the nozzle tip region.     

Vibration reduction of H/Shaft using an electromagnetic damper with mode change

The objective of this study is to develop a damper that can reduce the amplitude of vibration in various frequency ranges. Previous H/Shaft vibration reduction methods work in a passive way. A dynamic damper reduces the amplitude of vibration at its first mode, but vibration still appears at the second mode. A mass damper or hollow shaft can shift the natural frequency to a lower or higher region. The fixed operating frequency prevents vibration from being reduced outside the operating frequency range. The proposed damper uses electromagnets as either masses or actuators to change the damper mode between dynamic damper mode and mass damper mode. The electromagnetic damper (EMD) can change its mode to respond to the vibration excitation at both low and high frequencies. The vibration reduction performance was evaluated by FRF tests in laboratory and vehicle conditions. The results were compared with those of a dynamic damper and indicate that the amplitude of vibration is reduced by 95.6 % when the EMD is implemented on an H/Shaft, whereas only 61.9 % vibration reduction is achieved by the dynamic damper.     

自行车流视频识别判断方法研究

考虑算法的实时性,交通流个体识别往往采用轮廓特征来描述。由于自行车与行人的很多轮廓特征值相近,在复杂城市交通环境中,从慢行交通流中准确地识别出自行车是目前采用视频检测交通流的难点之一。通过现场视频检测获取足够的样本外轮廓数据,分析检测目标轮廓的高、宽、高宽比、面积等典型轮廓特征,发现目标轮廓高宽比特征能较好地识别出行人、自行车等慢行交通,并给出合适的取值范围。研究表明自行车高宽比能够较好地成为视频识别的依据,为自行车视频识别提供数据。     

甘泉铁路区间通过能力研究

阐述甘泉铁路车站分布和运量发展情况及货运量增加后区间通过能力不足的问题,介绍甘泉铁路行车组织和区间通过能力计算方法,计算各区间的通过能力,结合近期货物运量500万t、700万t、1000万t三种情况,计算需求通过能力,并给出提高通过能力的具体方案,为下一步货运量的增加做准备。     

科考船多波束导流罩线型CFD分析方法与试验验证

针对于科考船多波束导流罩设计和船体线型设计缺少关联分析的主要问题,介绍了一种科考船导流罩线型与船体线型一体化CFD分析方法,综合考虑实船航行过程中船体型线和导流罩型线之间的相互影响。根据这种分析方法,分别对导流罩和船体组合线型的阻力性能和防气泡性能进行了CFD预报,并进行了船模试验。两者吻合良好,验证了此种CFD分析方法的工程实用性。     

Marine accident analysis for collision and grounding in oil tanker using FTA method

In this study, collision and grounding data registered in GISIS (Global Integrated Shipping Information System) were investigated for oil tankers. The database includes the information of the collision and grounding accidents during the period between 1998 and 2010 in oil tankers. The risk assessments were carried out using fault tree analysis (FTA) programme for the incidents as collision and grounding occurred in oil tankers. In this study, we were able to investigate first the potential problems which cause the collision and grounding accidents have been determined, second, the occurrence of accidents has been shown with causal factors by the FTA method, and, finally, the significance degree of the initial events causing occurrence of accidents have been put forth. Collision in oil tanker resulted in economical loss (81%), pollution (6%) and death or injury (13%). Grounding in oil tanker resulted in economical loss (91%) and pollution (9%). According to the FTA results, the main reason for the accidents originating from human error is as follows: for collision accidents, Convention on the International Regulations for Preventing Collisions at Sea (COLREG) violation and the lack of communication between vessels; and for grounding accidents, the interpretation failure of the officer on watch and lack of communication in the bridge resource management.     

波浪作用下30万吨级油轮撞击能量研究

通过物理模型试验,研究不规则波作用下30万吨级油轮撞击能量,分析了主要影响因素HT、LB、TT0、D对撞击速度的影响规律。结果表明:撞击速度与HT成正比;与LB成幂次关系;与TT0也成正比,但TT0=1时船舶撞击码头与波浪产生共振,撞击速度出现极大值;压载时的撞击速度大于满载时的撞击速度,撞击速度与吃水成负相关。提出了30万吨级油轮撞击能量的计算公式,与青岛港原油码头三期工程和青岛益佳集团燃油码头工程的物理模型试验结果对比,具有较好的计算精度,可供工程设计参考。     

徐圩防波堤工程桶式基础结构设计

桶式基础结构是一种新型防波堤结构,目前尚没有成熟的设计标准和施工工艺。结合连云港徐圩防波堤工程,介绍此结构的设计荷载工况、结构模型试验、有限元分析方法、配筋方法。通过对比土体-结构相互作用模型和简化独立桶体模型,说明两种分析方法的优劣。以实例对比说明中国规范和美国混凝土学会ACI 318规范关于双向板裂缝宽度的计算方法。     

使用有限元分析以改善重载运输车轴

分析了北美铁路货运发生的车轴故障,介绍了使用有限元对F级和K级车轴进行应力分析计算,研究车轴尺寸变化对应力的影响,并提出了改善重载车轴设计的建议.