OH-radical behavior of unsteady lifted flame based on instantaneous change of the equivalence ratio

In an earlier study, the current authors showed that an unsteady-state lifted flame generated by an equivalence ratio conversion system for a given fuel, was similar to a steady-state lifted flame in terms of the change characteristics from a premixed flame to a critical flame and then to a triple flame with a diffusion flame positioned in the middle according to the concentration difference. Therefore, this study used an OH-PLIF method to investigate the characteristics of a steady-state lifted flame and an unsteady-state lifted flame created under conditions identical to the flames in the preceding study. PLIF (Planar laser induced fluorescence) is practically effective for visualizing the concentration fields within a flame. The resulting OH-radical measurements showed that an unsteady-state lifted flame created under the specific conditions used in this study showed similar tendencies in terms of OH-radical distribution, fluorescence intensity, and liftoff height, to a steady-state lifted flame, thereby confirming that the behavior of an unsteady-state lifted flame can be effectively predicted based on the behavior of a steady-state lifted flame.     

Study of RCM-based maintenance planning for complex structures using soft computing technique

To guarantee the efficiency of maintenance strategies for a complex structure, safety and cost limitations must be considered. This research introduces RCM-based (Reliability Centered Maintenance) life cycle optimization for reasonable maintenance. The design variable is the reliability of each part, which consists of a complex structure, while the objective is to minimize the total cost function in order to maintain the system within the desired system reliability. This research constructs the cost function that can reflect the current operating condition and maintenance characteristics of individual parts by generating essential cost factors. To identify the optimal reliability of each component in a system, this paper uses a Neuro-Evolutionary technique. Additionally, this research analyzes the reliability growth of a system by using the AMSAA (Army Material Systems Analysis Activity) model to estimate the failure rate of each part. The MTBF (Mean Time Between Failure) and the failure rate of the whole system, which is responding to the individual parts, are estimated based on the history data by using neural networks. Finally, this paper presents the optimal life cycle of a complex structure by applying the optimal reliability and the estimated MTBF to the RAMS (Reliability, Availability, Maintainability, and Safety) algorithm.     

Development of a flow network simulation program part I — flow analysis

An in-house simulation program was developed that can be utilized to predict flow characteristics such as pressure and velocities in any flow network system comprising multiple flow components, i.e., pipe, pump, heat exchanger, valves, etc. Although the code is intended for applications to network flow systems in a vehicle, it is written in a generalized manner to handle any possible network configuration of flow components. Therefore, it can easily function in various industrial applications. The network system where the flow is assumed to be one-dimensional is mathematically formulated by applying two conservation rules, mass and energy, to each flow component. These rules produce a set of non-linear equations. These non-linear equations are solved iteratively by adopting the Newton-Raphson scheme. This program has been tested in many different cases to demonstrate its validity and applicability. In this paper, two examples are introduced to show how the program can be used to find solutions in real engineering problems. Throughout the study, it was found that the code can most efficiently be used to verify a proposed design concept in an early design stage of the vehicle development cycle. The thermal analysis portion of the program will be dealt with in Part II of the paper.     

双绞合钢丝网加筋格宾挡土墙设计方法研究

采用六边形双绞合金属网面,经工厂化生产形成面墙,面墙与金属网面无接点整体连接形成一种新的加筋结构-加筋格宾结构,目前国内工程应用较少,相应的计算理论与设计方法滞后,难以满足工程需要.研究表明,双绞合钢丝网加筋格宾挡土墙比传统的条带式加筋、土工格栅挡土墙的稳定性好得多,适合于修筑高大及高等级公路的挡土墙.在吸收国外先进加筋技术的基础上,通过拉伸、拉拔试验合理确定了相关设计参数,采用室内大型模型试验,确定了加筋格宾结构的滑动破裂面形状,提出了一整套该新型结构的计算与设计方法.     

基于安全可靠性的多类用户交通分配模型

为探究出行安全对用户出行选择行为的影响,提出了考虑事故风险成本和旅行时间的多类用户交通分配模型。针对事故发生的随机性特征,定义了路径出行安全可靠性概念,并以此计算用户的事故风险成本预算,体现出行者的安全偏好。基于考虑事故机会和事故风险的基础事故预测模型,针对路段和交叉口的不同特征,分别定义了路段和交叉口的事故风险成本分布。构建的交叉口事故风险成本模型,体现了交叉口不同转向的事故风险成本的差异性。为了求解基于安全可靠性的多类用户交通分配模型,采用路径配流法和相继平均法设计了相应的求解算法,并通过算例分析了模型和算法的有效性。研究结果表明：安全可靠性在用户出行选择中具有重要影响。当在广义出行费用中考虑事故风险成本时,出行者会更多地选择事故风险成本较小的路径;不同风险倾向的用户会有不同的选择特征,保守型出行者倾向于选择路径事故风险成本标准差相对较小的路径,即事故风险成本波动小的路径,而中立型出行者倾向于选择事故风险成本均值相对较低的路径;考虑交叉口的事故风险成本与否会直接影响流量分配结果,即路径交叉口数量和转向的差异性同样会影响出行者的选择。所提出的模型对于客流预测和网络安全评价与管理具有潜在的应用价值。     

机械电子技术在未来铁道车辆中的应用与发展(待续)

全面介绍了机械电子技术在未来铁道车辆特别是悬挂系统、牵引系统和制动系统中的应用和发展。     

浅水中航行船舶的水动力系数

本文利用切片理论数值研究了浅水中前进船舶的水动力系数.为计及水深的影响,采用简单格林函数方法求解剖面水动力系数,提出了满足辐射条件的一种较方便的数值方法.计算了一数学船型的水动力系数,并与有关文献结果比较验证了数值方法的可行性.数值结果显示了水底效应对航行船舶水动力的影响,为进一步研究浅水航行船舶的耐波性提供了基础.     

The motion analysis of fire video images based on moment features and flicker frequency

In this paper, motion analysis methods based on the moment features and flicker frequency features for early fire flame from ordinary CCD video camera were proposed, and in order to describe the changing of flame and disturbance of non-flame phenomena further more, the average changing pixel number of the first-order moments of consecutive flames has been defined in the moment analysis as well. The first-order moments of all kinds of flames used in our experiments present irregularly flickering, and their average changing pixel numbers of first-order moments are greater than fire-like disturbances. For the analysis of flicker frequency of flame, which is extracted and calculated in spatial domain, and therefore it is computational simple and fast. The method of extracting flicker frequency from video images is not affected by the catalogues of combustion material and distance. In experiments, we adopted two kinds of flames, i.e. , fixed flame and movable flame. Many comparing and disturbing experiments were done and verified that the methods can be used as criteria for early fire detection.     

轨道交通的产学研新模式——麻省理工学院/波多黎各地铁项目简介

波多黎各于20世纪90年代初才开始发展城市轨道交通,但因为善于利用后发优势,通过产学研的结合,充分考虑了地铁工程的多学科特性,走出一条有波多黎各特色的道路,成为美国和国际公共交通领域技术交流的典范.主要介绍了其产学研的项目,它由负责地铁项目的政府主管部门、波多黎各大学和美国麻省理工学院共同组织实施,历经地铁前期规划、修建、调试、运营和政策分析等全部过程,共13年的时间.这种方式提高了工程的质量和施工效率,推动当地轨道交通辅助产业的发展,加快了新技术的应用及研究,培养了一大批轨道交通的规划运营人才,为拉丁美洲城市轨道交通建设提供了一个新模式.波多黎各的经验对于我国当前的城市轨道交通建设同样具有借鉴意义.     

模拟流体-弹性结构相互作用分析的ISPH-TLSPH耦合方法研究（英文）

A fully Lagrangian algorithm for numerical simulation of fluid-elastic structure interaction(FSI) problems is developed based on the Smoothed Particle Hydrodynamics(SPH) method. The developed method corresponds to incompressible fluid flows and elastic structures. Divergence-free(projection based) incompressible SPH(ISPH) is used for the fluid phase, while the equations of motion for structural dynamics are solved using Total Lagrangian SPH(TLSPH) method.The temporal pressure noise can occur at ...