科考船多波束导流罩线型CFD分析方法与试验验证

针对于科考船多波束导流罩设计和船体线型设计缺少关联分析的主要问题,介绍了一种科考船导流罩线型与船体线型一体化CFD分析方法,综合考虑实船航行过程中船体型线和导流罩型线之间的相互影响。根据这种分析方法,分别对导流罩和船体组合线型的阻力性能和防气泡性能进行了CFD预报,并进行了船模试验。两者吻合良好,验证了此种CFD分析方法的工程实用性。     

Marine accident analysis for collision and grounding in oil tanker using FTA method

In this study, collision and grounding data registered in GISIS (Global Integrated Shipping Information System) were investigated for oil tankers. The database includes the information of the collision and grounding accidents during the period between 1998 and 2010 in oil tankers. The risk assessments were carried out using fault tree analysis (FTA) programme for the incidents as collision and grounding occurred in oil tankers. In this study, we were able to investigate first the potential problems which cause the collision and grounding accidents have been determined, second, the occurrence of accidents has been shown with causal factors by the FTA method, and, finally, the significance degree of the initial events causing occurrence of accidents have been put forth. Collision in oil tanker resulted in economical loss (81%), pollution (6%) and death or injury (13%). Grounding in oil tanker resulted in economical loss (91%) and pollution (9%). According to the FTA results, the main reason for the accidents originating from human error is as follows: for collision accidents, Convention on the International Regulations for Preventing Collisions at Sea (COLREG) violation and the lack of communication between vessels; and for grounding accidents, the interpretation failure of the officer on watch and lack of communication in the bridge resource management.     

波浪作用下30万吨级油轮撞击能量研究

通过物理模型试验,研究不规则波作用下30万吨级油轮撞击能量,分析了主要影响因素HT、LB、TT0、D对撞击速度的影响规律。结果表明:撞击速度与HT成正比;与LB成幂次关系;与TT0也成正比,但TT0=1时船舶撞击码头与波浪产生共振,撞击速度出现极大值;压载时的撞击速度大于满载时的撞击速度,撞击速度与吃水成负相关。提出了30万吨级油轮撞击能量的计算公式,与青岛港原油码头三期工程和青岛益佳集团燃油码头工程的物理模型试验结果对比,具有较好的计算精度,可供工程设计参考。     

徐圩防波堤工程桶式基础结构设计

桶式基础结构是一种新型防波堤结构,目前尚没有成熟的设计标准和施工工艺。结合连云港徐圩防波堤工程,介绍此结构的设计荷载工况、结构模型试验、有限元分析方法、配筋方法。通过对比土体-结构相互作用模型和简化独立桶体模型,说明两种分析方法的优劣。以实例对比说明中国规范和美国混凝土学会ACI 318规范关于双向板裂缝宽度的计算方法。     

超空泡航行体加速过程流动特性研究

超空泡航行体加速过程是航行体进入高速巡航状态的重要阶段。为了深入了解超空泡航行体加速过程中的流动特性,文中采用基于欧拉两流体模型的CFD方法以及基于相对运动的源项法对超空泡航行体全沾湿加速过程、通气加速过程进行了数值模拟,其中全沾湿过程主要研究了加速过程附加质量变化规律,通气加速过程研究了通气量、重力效应以及航行体攻角对空泡发展速度的影响。研究结果表明全沾湿加速过程中由于加速度较大,附加惯性力影响不能忽略;通气量、航行体攻角对超空泡生成速度均有较大影响,当速度达到50 m/s以上时,重力效应对空泡生成速度影响可以忽略。     

CFD Analysis of Ship-to-Ship Hydrodynamic Interaction

A numerical study of ship-to-ship interaction forces is performed using a commercial CFD code, and the results are compared with experimental data and with the results of a panel method analysis. Two ship models have been used in the interaction forces analysis: a tug and a tanker, advancing parallel to each other with different lateral distances and two different values of the fluid depth. Computations are carried out with four different flow models: inviscid and viscous flow with the free surface modeled as a rigid wall and inviscid and viscous flow with the deformable free surface. A fair agreement was obtained with available experimental data and results obtained by panel method. The influence of viscosity in the computations is found to be comparatively weak, while the wavemaking effects may be important, at small magnitude of the horizontal clearance.     

Are we ready to embrace connected and self-driving vehicles? A case study of Texans

While connected, highly automated, and autonomous vehicles (CAVs) will eventually hit the roads, their success and market penetration rates depend largely on public opinions regarding benefits, concerns, and adoption of these technologies. Additionally, the introduction of these technologies is accompanied by uncertainties in their effects on the carsharing market and land use patterns, and raises the need for tolling policies to appease the travel demand induced due to the increased convenience. To these ends, this study surveyed 1088 respondents across Texas to understand their opinions about smart vehicle technologies and related decisions. The key summary statistics indicate that Texans are willing to pay (WTP) $2910, $4607, $7589, and $127 for Level 2, Level 3, and Level 4 automation and connectivity, respectively, on average. Moreover, affordability and equipment failure are Texans’ top two concerns regarding AVs. This study also estimates interval regression and ordered probit models to understand the multivariate correlation between explanatory variables, such as demographics, built-environment attributes, travel patterns, and crash histories, and response variables, including willingness to pay for CAV technologies, adoption rates of shared AVs at different pricing points, home location shift decisions, adoption timing of automation technologies, and opinions about various tolling policies. The practically significant relationships indicate that more experienced licensed drivers and older people associate lower WTP values with all new vehicle technologies. Such parameter estimates help not only in forecasting long-term adoption of CAV technologies, but also help transportation planners in understanding the characteristics of regions with high or low future-year CAV adoption levels, and subsequently, develop smart strategies in respective regions.     

How household transportation expenditures have evolved in Canada: a long term perspective

In recent years, increasing recognition of the challenges associated with global climate change and inequity in developed countries have revived researcher’s interest towards analyzing transportation related expenditure of households. The current research contributes to travel behaviour literature by developing an econometric model of household budgetary allocations with a particular focus on transportation expenditure. Towards this end, we employ the public-use micro-data extracted from the Survey of Household Spending (SHS) for the years 1997–2009. The proposed econometric modeling approach is built on the multiple discrete continuous extreme value model (MDCEV) framework. Specifically, in our analysis, the scaled version of the MDCEV model outperformed its other counterparts. Broadly, the model results indicated that a host of household socio-economic and demographic attributes along with the residential location characteristics affect the apportioning of income to various expenditure categories and savings. We also observed a relatively stable transportation spending behaviour over time. Additionally, a policy analysis exercise is conducted where we observed that with increase in health expenses and reduction in savings results in adjustments in all expenditure categories.     

Robust network pricing and system optimization under combined long-term stochasticity and elasticity of travel demand

Network pricing serves as an instrument for congestion management, however, agencies and planners often encounter problems of estimating appropriate toll prices. Tolls are commonly estimated for a single-point deterministic travel demand, which may lead to imperfect policy decisions due to inherent uncertainties in future travel demand. Previous research has addressed the issue of demand uncertainty in the pricing context, but the elastic nature of demand along with its uncertainty has not been explicitly considered. Similarly, interactions between elasticity and uncertainty of demand have not been characterized. This study addresses these gaps and proposes a framework to estimate nearest optimal first-best tolls under long-term stochasticity in elastic demand. We show first that the optimal tolls under the deterministic-elastic and stochastic-elastic demand cases coincide when cost and demand functions are linear, and the set of equilibrium paths is constant. These assumptions are restrictive, so three larger networks are considered numerically, and the subsequent pricing decisions are assessed. The results of the numerical experiments suggest that in many cases, optimal pricing decisions under the combined stochastic-elastic demand scenario resemble those when demand is known exactly. The applications in this study thus suggest that inclusion of demand elasticity offsets the need of considering future demand uncertainties for first-best congestion pricing frameworks.     

Factors associated with home-based e-working and e-shopping in Nanjing,China

The widespread adoption of information and communication technology has facilitated frequent e-activities in people’s daily life. From the perspective of individual’s time use on e-working and e-shopping at home, this paper aims to enhance our understanding of the function of home beyond a living space for family life. Using a household survey of 608 full-time paid employees who conducted e-activities at home in Nanjing, China, we investigated the characteristics and patterns of home-based e-working and e-shopping. Only 7.9% of the respondents neither e-shopped nor e-worked at home. We find that the socio-demographic context, Internet use habits, attitudes towards e-working/e-shopping, and geographical accessibility have influenced the patterns of home-based e-working and e-shopping. The results indicate that the rich e-activities taking place at home have changed the time use at home and reinforced the function of home as a multifunctional hub.