Interior sound field refinement of a passenger car using modified panel acoustic contribution analysis

Panel acoustic contribution analysis (PACA) is a practical engineering tool for the reduction of interior structure-borne noise in passenger cars. In this study, the current PACA method has been improved for sound field refinement of the entire interior. Two new parameters, the “acoustic contribution sum” and the “total sound field contribution”, are introduced to analyze the interior sound field characterized with multiple field points and sound pressure peaks, and to evaluate the integrated acoustic contributions of auto body panels. In addition, a systematic methodology for automotive interior sound field refinement is also proposed on the basis of the modified PACA method. An example of a passenger car model demonstrates the application of the sound-field-refinement methodology and shows the advantage of using damping layers at optimum locations on the auto body. The example also shows that the modified PACA method has practical significance for refining the interior sound field and decreasing added mass in accord with the trend towards lightweight auto bodies.     

Physical-chemical properties of ethanol-diesel blend fuel and its effect on the performance and emissions of a turbocharged diesel engine

This paper deals with the main physical-chemical properties of ethanol-diesel blend and the effects of ethanoldiesel blends (up to 15% volume) on engine performance (full load torque vs. engine speed, BSEC vs. torque at 1400 r/min and 2300 r/min, and effect of start of injection angle) and emissions in ECE R49 tests (steady 13 points) using a 6.6 L inline 6-cylinder turbocharged direct injection diesel engine. The results show that an increase in ethanol fraction results in decreased viscosity of the blend fuel and very high distillation characteristics in the low temperature range. Solvents can improve the solubility of ethanol-diesel blends. The engine power was degraded proportional to the ethanol content (10% and 15%) due to the LHV (low heating value) of the blends. The higher latent heat of vaporization and lower CN (cetane number) of ethanol, which results from the steady state emissions of CO, HC, and SOF (soluble organic fraction), were much higher in the ECE R49 tests at low loads. Soot (solid mass) emissions were improved. The particulate matter emissions were significantly increased with higher blend volumes, and NOx emissions slightly increased with higher ethanol volumes. By increasing the injection angle properly, the performance parameters of the diesel engine were improved, but NOx emissions were deteriorated slightly.     

HCCI combustion characteristics during operation on DME and methane fuels

The Homogeneous Charge Compression Ignition (HCCI) engine has attracted much interest because it can simultaneously achieve high efficiency and low emissions. However, the ignition timing is difficult to control because this engine has no physical ignition mechanism. In addition, combustion proceeds very rapidly because the premixed mixture ignites simultaneously at multiple locations in the cylinder, making it difficult to increase the operating load. In this study, an HCCI engine was operated using blended test fuels comprised of dimethyl ether (DME) and methane, each of which have different ignition characteristics. The effects of mixing ratios and absolute quantities of the two types of fuel on the ignition timing and rapidity of combustion were investigated. Cool flame reaction behavior, which significantly influences the ignition, was also analyzed in detail on the basis of in-cylinder spectroscopic measurements. The experimental results revealed that within the range of the experimental conditions used in this study, the quantity of DME supplied substantially influenced the ignition timing, whereas there was little observed effect from the quantity of methane supplied. Spectroscopic measurements of the behavior of a substance corresponding to HCHO also indicated that the quantity of DME supplied significantly influenced the cool flame behavior. However, the rapidity of combustion could not be controlled even by varying the mixing ratios of DME and methane. It was made clear that changes in the ignition timing substantially influence the rapidity of combustion.     

Improved method for analyzing automotive transmission parts (shaft/gear) manufactured using the warm shrink fitting process

There are three sub-processes associated with the assembly of an automobile transmission: heat fitting, shrink fitting, and combination fitting. In the heat fitting stage, the gear is heated to a specified temperature and then squeezed towards the outer diameter of the shaft. The stress of the heat-fitted gear depends on the yield strength of the gear. In the shrink fitting process, the gear is typically squeezed towards the shaft at room temperature using a press. An alternate method, known as warm shrink fitting, heats the already warm gear and safely squeezes it toward the shaft. The warm shrink fitting process for automobile transmission parts is becoming more commonplace, but the additional heating can cause the dimensions of the assembled parts (shaft/gear) to change with respect to both the outer diameter and the profile of the gear. As a result, there may be additional noise and vibration between gears. To address these problems, we analyzed the warm shrink fitting process using the contact pressure caused by fitting interference between the outer diameter of the shaft and the inner diameter of the gear, fitting temperature, and the profile tolerance of the gear as design parameters. In this study, a closed form equation for predicting the contact pressure and fitting load is proposed. This equation is used to develop an optimization technique for the warm shrink fitting process. The reliability of the model was verified using experimental results measured in the field, and FEM with thermal-structural coupled field analysis. Actual loads measured in the field showed good agreement with the results obtained by theoretical and finite element analysis, and expansion of the outer diameters of the gears agreed well with the results.     

Motor control of input-split hybrid electric vehicles

A motor control strategy for an input-split hybrid electric vehicle (HEV) is proposed. From a power characteristic analysis, it is found that the powertrain efficiency decreases for speed ratios at which power circulation occurs. Using dynamic models of an input-split HEV powertrain, a motor-generator control algorithm for obtaining high system efficiency is designed by inversion-based control. The performance of the control algorithm is evaluated by the simulator which is developed based on PSAT, and simulation results are compared with the test results. It is found that, even if the engine thermal efficiency is sacrificed by moving the engine operation point from the OOL for the control strategy, improved overall powertrain system efficiency can be achieved by the engine operation that gives a relatively high efficiency from the viewpoint of the overall powertrain efficiency. The control algorithm developed can be used in design of future electric vehicles.     

Sensor fusion-based lane detection for LKS+ACC system

This paper discusses the market trends and advantages of a safety system integrating LKS (Lane Keeping System) and ACC (Adaptive Cruise Control), referred to as the LKS+ACC system, and proposes a method utilizing the range data from ACC for the sake of lane detection. The overall structure of lane detection is the same as the conventional method using monocular vision: EDF (Edge Distribution Function)-based initialization, sub-ROI (Region Of Interest) for left/right and distance-based layers, steerable filter-based feature extraction, and model fitting in each sub-ROI. The proposed method adds only the system for confining lane detection ROI to free space that is established by range data. Experimental results indicate that such a simple adaptive ROI can overcome occlusion of lane markings and disturbance of neighboring vehicles.     

线性水波理论中远场无波势的构建(英文)

Various water wave problems involving an infinitely long horizontal cylinder floating on the surface water were investigated in the literature of linearized theory of water waves employing a general multipole expansion for the wave potential. This expansion involves a general combination of a regular wave, a wave source, a wave dipole and a regular wave-free part. The wave-free part can be further expanded in terms of wave-free multipoles which are termed as wave-free potentials. These are singular solutions of Laplace’s equation (for non-oblique waves in two dimensions) or two-dimensional Helmholz equation (for oblique waves) satisfying the free surface condition and decaying rapidly away from the point of singularity. The method of constructing these wave-free potentials is presented here in a systematic manner for a number of situations such as deep water with a free surface, neglecting or taking into account the effect of surface tension, or with an ice-cover modelled as a thin elastic plate floating on water.     

The international legal instruments in addressing piracy and maritime terrorism: A critical review

This paper critically reviews four international legal instruments in addressing piracy and maritime terrorism - UNCLOS, SUA, PSI and the ISPS Code. Piracy on high seas is currently becoming key tactics of terrorist groups - many of today's pirates are also terrorists with ideological bents and a broad political agenda. The intertwining of piracy and maritime terrorism poses substantial risks for global markets, understanding that much of the world's energy and cargoes being shipped through pirate-infested regions like Southeast Asia. Through investigating the contributions and limitations of the stated instruments, several constructive recommendations are offered to improve their effectiveness in controlling and deterring piracy and maritime terrorism from threatening the well-being of the maritime industries in the post-2008 world.     

Does scale heterogeneity across individuals matter? An empirical assessment of alternative logit models

There is growing interest in establishing a mechanism to account for scale heterogeneity across individuals (essentially the variance of a variance term or the standard deviation of utility over different choice situations), in addition to the more commonly identified taste heterogeneity in mixed logit models. A number of authors have recently proposed a model that recognizes the relationship between scale and taste heterogeneity, and investigated the behavioural implications of accounting for scale heterogeneity in contrast to a term in the utility function, itself. In this paper we present a general model that extends the mixed logit model to explicitly account for scale heterogeneity in the presence of preference heterogeneity, and compare it with models that assume only scale heterogeneity (referred to as the scale heterogeneous multinomial logit model) and only preference heterogeneity. Our empirical assessment suggests that accommodating scale heterogeneity in the absence of accounting for preference heterogeneity may be of limited empirical interest, resulting in a statistically inferior model, despite it being an improvement over the standard MNL model. Scale heterogeneity in the presence of preference heterogeneity does garner favour, with the generalized mixed logit model an improvement over the standard mixed logit model. The evidence herein suggests, however, that compared to a failure to account for preference heterogeneity that is consequential, failure to account for scale heterogeneity may not be of such great empirical consequence in respect of behavioural outputs such as direct elasticities and willingness to pay. However additional studies are required to establish the extent to which this evidence is transferable to a body of studies.     

Difference in ship motion and wave load in long and short crested irregular waves北大核心CSCD

[Objective]To investigate ship motion and load responses in realistic 3D waves and overcome the limitations of the traditional 2D wave assumption, this paper develops a method for predicting ship motion and load responses in short-crested waves. [Method]The long- and short-term responses of ship motion and load in long- and short-crested waves are numerically predicted using the spectral analysis and statistical probability methods, respectively. The influence of directional function on ship response is also numerically analyzed. Moreover, tank model tests and a large-scale model sea trial are comparatively conducted to validate the difference between ship response and statistics in long- and short-crested irregular waves. [Results]The results show that when navigating against the waves in the same sea condition, the long-crested wave assumption overestimates the statistical mean value of ship load response, but underestimates extreme load in real seas. For long-crested waves, the ship motion and acceleration power spectrum is concentrated around a certain frequency band. [Conclusion]Ship motion and load responses in realistic 3D waves are significantly different from those in 2D long-crested waves. The directional function of short-crested waves also has a significant effect on ship motion and load responses. © 2023 The Author(s).