Optimal Preview Control of a Two-dof Vehicle Model Using Stochastic Optimal Control Theory

An optimal preview control algorithm is applied to a two degree of freedom(dof) vehicle model travelling with constant velocity on a randomly profiled road. The road roughness is modelled as a homogeneous random process being the output of a linear first order filter to white noise. The input from the road irregularity is assumed to be measured at some distance in front of the vehicle and this measured infonnation is utilized by the active controller to prepare the system for the ensuing input. The preview control algorithm is obtained by minimizing a quadratic performance index and by describing the average behaviour of the system by the covariance matrix of the vehicle response state vector. Results are presented for full state feedback and significant improvements in sprung mass acceleration, suspension working space and road holding are observed.     

Automated Emergency Four-Wheel-Steered Vehicle Using Continuous Gain Equations

Advanced Vehicle Control Systems (AVCS), when realized, should substantially increase the convenience and safety of highway travel. Automated lateral control is an important step in the realization of AVCS. Much research has been concerned with lateral control during low-g maneuvers. However, before passengers' lives are in the hands of any automated laterally-controlled vehicle, the vehicle controller must be designed to respond to emergency situations where high-g maneuvers may be necessary.

This paper presents the development of a nonlinear-gain-optimized (NGO) controller for emergency automated lateral control of four wheel steered automobiles. Continuous gain equations (GE) are used to account for changes in the vehicle speed. The NGO controller uses a linear vehicle/tire model to define the state model. The response of a nonlinear vehicle/tire model is used to choose the performance index that optimizes the feedback gains for high-g emergency maneuvers at discrete speeds. Continuous gain equations are then derived as least-square approximations to each set of gains.

The performance of the four-wheel-steer continuous gain equations (4WS-GE) controller is compared to that of a two-wheel-steer continuous gain equations (2WS-GE) controller. Significant improvements in vehicle response are realized by using the 4WS-GE controller. The robustness of the controller's performance is examined with respect to changes in tire parameters and changes in vehicle mass.     

Discrete Adaptive Active Suspension for Hardware Implementation

This paper presents a discrete adaptive control approach for an active suspension. The study involves formulation of an active suspension as a digital controller problem involving the time delays. A nonlinear time varying (NTV), single input single output (SISO) suspension model is considered for the analysis. A discrete model reference adaptive control (DMRAC) approach with recursive least square (RLS) estimation is used to form the controller. The controller is designed to maintain the static equilibrium irrespective of dynamic load variations as a disturbance force on the model. Simulation results for deterministic and stochastic inputs are presented to substantiate the approach. Results indicate good performance of adaptive controller even for large dynamic variations of the model and has the potential for a successful hardware implementation.     

3-D numerical and experimental analysis for airflow within a passenger compartment

People use cars so frequently that they always consider the air-conditioning, and thermal comfort of the driver and passenger when buying a new car. Therefore accurate simulation of the thermal performance of automobile air conditioners to improve human comfort has become increasingly important. In order to improve the thermal comfort of passengers, 3-D flow motion and thermal behavior within vehicles must be analyzed. In this paper, a numerical simulation was used to investigate thermal behavior in a vehicle. Because air temperature at an air vent is related to the cooling capacity of the air conditioner, the cooling capacity was calculated using ɛ-NTU (effective number of transfer unit) theoretical equations. Using the air temperature relationship between inlet and outlet vents as boundary conditions, a 3-D unsteady κ-ɛ turbulent model was used to give a transient analysis simulation of the temperature field and flow conditions in a vehicle’s passenger cabin. Cooling cycle analysis and conjugate heat transfer analysis at the inside surface of the cabin’s ceiling, floor and sides were also considered. The predicted temperature distributions in the vehicles passenger cabin were in good agreement with those obtained experimentally.     

Effect on friction of engine oil seal with engine oil viscosity

Low viscosity engine oil can improve a vehicle’s fuel economy by decreasing the friction between the engine components. Frictional torque varies with the velocity change due to different viscosity characteristics of SAE grade 5W-20, 5W-30 and 5W-40 engine oils. The viscosity for each of these grades was measured to outline the effect low viscosity engine oils have on engine friction, which may lead to improved fuel economy. Engine oil seal frictional torque increases with the shaft rotational speed for all three engine oil grades. A decrease in engine oil seal frictional torque was confirmed when low viscosity engine oil was used. Also, the leak-free performance of the engine oil with the seal satisfied the life limit durability test criteria. Thus, low viscosity engine oil may be used to improve fuel economy by decreasing the frictional loss of the engine oil seal while having no negative impact on performance due to leak-free functioning.     

Crosswind Feedforward Control - A Measure to Improve Vehicle Crosswind Behaviour

The theory of crosswind feedforward control was explained using the example of a vehicle with active front-wheel steering. Beforehand, the calculation formulas and frequency responses of the transient crosswind force and of the wind yaw moment acting on the vehicle were derived using the example of a simple vehicle fluid model. The influence of the transiency of crosswind disturbance on the dynamic crosswind behaviour of a vehicle was then presented. The results of simulation confirmed the analyses carried out in the frequency domain for feedforward control with front, rear and all-wheel steering. With front-wheel steering, the influence of crosswind on one of the vehicle movement variables (lateral acceleration or yaw rate) could be almost completely compensated by dynamic feedforward control. With rear-wheel steering, it is only possible to compensate directly for the influence on the yawing rate. Due to the setting of the side force in the same direction as the lateral wind force at the start, active rear-wheel steering is not so successful as active front-wheel steering. Nevertheless, the crosswind behaviour of a vehicle can be considerably enhanced by feedforward control with rear-wheel steering. The best crosswind behaviour was obtained with active all-wheel steering: the vehicle hardly responds at all to crosswinds and remains on course despite heavy gusts of wind.     

Intra-Platoon Collision Behavior during Emergency Operations

This paper presents current research regarding intra-platoon collision dynamics for rapid decelerations. Measures of ride quality and impact severity are introduced to allow comparisons between different collision scenarios. In this study, the disturbance input to the platoon is assumed to be a rapid braking of the lead vehicle. Several deceleration rates are used to assess the overall platoon behavior and the effect of the intra-platoon collisions on the platoon passengers. The role of the desired headway spacing on preventing the occurrence of intra-platoon collisions and improving rider comfort is discussed.     

主跨138m预应力混凝土连续梁桥的施工控制

本文以广州市金沙洲大桥主桥大跨度预应力混凝土连续梁桥为背景 ,介绍大跨度混凝土连续梁桥施工控制的目的、内容、方法和措施等 ,并根据现场测试的结果来验证本文所使用的控制方法的正确性和合理性     

柴油-酒精混合燃料发动机的性能研究

在分析柴油—酒精混合燃料物理化学特性的基础上，研究了不同混合比例的柴油—酒精混合燃料发动机的性能。研究表明：柴油醇燃料发动机的有效燃油消耗率较柴油机的升高，而有效能耗率有一定程度的降低；发动机的碳烟排放明显降低，在保持同样排温的前提下，其功率有一定程度的升高，尾气排放明显降低；柴油机使用混合燃料后，滞燃期延长，燃烧持续期缩短。在采用推迟供油的条件下，柴油—酒精混合燃料发动机的尾气排放性能可以得到较大幅度的提高。     

上海市杨浦区防汛决策支持系统研究

在分析杨浦区城市防汛问题的基础上 ,设计了其防汛决策支持系统 ,并开发了基于GIS的城市地面积水的动态显示系统。系统可以迅速、可靠和正确地模拟城市雨情、水情、灾情的发展过程和可能后果 ,为城市防汛决策提供多层次的信息服务和多种支持手段