PIV velocity field measurements of flow around a KRISO 3600TEU container ship model

The main purpose of this investigation was to demonstrate a useful application of the particle image velocimetry (PIV) method to analyze the complex flow characteristics around a ship. For a sample illustration, the KRISO 3600TEU container ship model was chosen. The flow structure in the stern and near-wake region of the model has been investigated experimentally in a circulating water channel. Instantaneous velocity fields measured by the PIV velocity field measurement technique have been ensemble-averaged to give details of flow structures such as the spatial distributions of the local mean velocity, vorticity, and turbulent kinetic energy. The free-stream velocity was fixed at U _o = 0.6m/s, and the corresponding Reynolds number based on the length between perpendiculars was about 9.0 × 10⁵. The container ship model shows a complicated three-dimensional flow structure in the stern and near-wake regions. The PIV results clearly revealed the formation of large-scale bilge vortices in the stern region and their effect on the flow in the near-wake. The results shown here provide valuable information for hull form design and the validation of viscous ship flow codes and of turbulence models.     

隧道检测系统及其在韩国高速铁路隧道的应用

介绍韩国高速铁路隧道安装的健康监测系统,提出基于检测数据诊断隧道衬砌可能破损的新系统识别方法。引入逆算法,即根据已知的形变数据和混凝土衬砌恒载,估计破损的程度和位置。对以刚度均减和裂缝概念为基础建立的两种模型进行效果和优劣比较。对理想化的隧道结构进行数学分析,并用检测数据中常用的白噪声对模型进行适应性研究。结果表明,基于刚度均减方法的模型1对白噪声相对不敏感,而以裂缝概念为基础的模型2由于受刚度减小的影响很小,易于现场应用。     

Engine performance and toxic gas analysis of biobutanol-blended gasoline as a vehicle fuel

A comprehensive study evaluating the performance of biobutanol-blended gasoline in passenger cars was conducted because biobutanol is considered a better biofuel than bioethanol as it has no water solubility and it has a higher caloric value, giving it a higher energy value. Several kinds of samples—suboctane gasoline, 8 volume percentage and 16 volume percentage biobutanol—blended gasoline, and a 10 volume percentage MTBE-blended market sample (as the oxygencontaining gasoline)-were tested to evaluate the engine performance in terms of the detergency of the intake valves and combustion chambers, power, emissions, and fuel efficiency. Additionally, the toxicity of the emissions from these biobutanolblended samples was tested in order to assess the viability of biobutanol as one of the competitive potential substitutes for MTBE as an oxygenator in the near future. The results show that biobutanol-blended gasoline samples had relatively better detergency, relatively higher power, and similar levels of emissions compared with those of MTBE-blended gasoline. Formaldehyde was emitted from all of the samples at almost the same levels and within the error range, whereas biobutanolblended gasoline samples emitted approximately three times the amount of acetaldehyde than did the suboctane gasoline. This study shows that biobutanol is one of the best alternative bioalcohol fuels for use in the near future.     

CFD-based method of determining form factor <Emphasis Type="Italic">k</Emphasis> for different ship types and different drafts

The value of form factor k at different drafts is important in predicting full-scale total resistance and speed for different types of ships. In the ITTC community, most organizations predict form factor k using a low-speed model test. However, this method is problematic for ships with bulbous bows and transom. In this article, a Computational Fluid Dynamics (CFD)-based method is introduced to obtain k for different type of ships at different drafts, and a comparison is made between the CFD method and the model test. The results show that the CFD method produces reasonable k values. A grid generating method and turbulence model are briefly discussed in the context of obtaining a consistent k using CFD.     

Model test for dynamic construction mechanical effect of large-span loess tunnel

It has been a focus of debate for a large time on construction methods for large-span loess tunnel. Reasonable construction method has much effect on stability of tunnel and construction schedule. Deformation and failure of surrounding rock are quite complex. Associating with the large-span loess tunnel of Zhengzhou—Xi’an high-speed passenger rail line in China, large scale model test with geometric proportion 1:20 is applied to study on dynamic mechanical behavior of various construction methods. They include full-face excavation with support and no support, and benching method with support. It is found that pre-deformation and stress accumulation take place ahead of working face. The effects of three construction methods are further studied, particularly in terms of tunnel displacement and stress changes. It is revealed that benching method transfers load to an unexcavated area, limits horizontal deformation, reduces stress concentration effectively, lengthens the distance between location of peak for stress concentration and working face, and consequently increases stability. The model test results not only supply theoretical foundation for determination of reasonable construction method, but also can act as reference for similar tunnel and underground engineering construction.     

A hybrid firefly algorithm for optimizing fractional proportional-integral-derivative controller in ship steering

In this paper, a new algorithm which integrates the powerful firefly algorithm(FA) and the ant colony optimization(ACO) has been used in tracking control of ship steering for optimization of fractional-order proportional-integral-derivative(FOPID) controller gains. Particle swarm optimization(PSO) algorithm is also used to optimize FOPID controllers, and their performances are compared. It is found that FA optimized FOPID controller gives better performance than others. Sensitivity analysis has been carried out to see the robustness of optimum FOPID gains obtained at nominal conditions to wide changes in system parameters, and the optimum FOPID gains need not be reset for wide changes in system parameters.     

A trial application of FSA methodology to the hatchway watertight integrity of bulk carriers

Formal safety assessment (FSA) is a formal, structured and systematic methodology, aimed at enhancing maritime safety, including protection of life, property and marine environment, by using risk and cost–benefit assessments. For the application of this methodology to the rule-making process, the International Maritime Organization (IMO) presented the Interim Guidelines, which describe procedures of FSA and inputs/outputs of each procedure in detail. This paper basically deals with an application of FSA methodology according to the IMO's Interim Guidelines to the hatchway watertight integrity of bulk carriers, which was carried out as a cooperative research between Korean Register of Shipping and Seoul National University. As results of this application study, 18 hazards are identified and 32 risk control measures are devised to reduce the associated risks. Potential risks, costs and benefits when some Risk Control Options are introduced are evaluated in monetary unit of US $. Finally, some discussions and recommendations based on experiences are also given for both future work and better application of this FSA methodology to the rule-making process.     

A review of the Effect of α/W ratio on fracture toughness （Ⅱ） experimental investigation in LEFM

In part I of this series, experimental investigation in EPFM （elastic-plastic fracture mechanics） had been discussed. In this paper, experimental investigation in LEFM （ linear elastic fracture mechanics） is given. Fracture toughness tests had been carried out on three different strength steels, using both through-cracked specimens with different α/W ratio and semi-elliptical cracked specimens with variable crack size and shape. Results show that the fracture toughness KIC increases with decreasing α/W when α/W 〈 0.3 for three-point-bend specimens, and that for α/W 〉 0.3, it is independent of α/W. Shallow crack specimens, both through-cracked and surface-cracked, gave markedly higher values than deeply notched specimens. However, the effect of crack shape on fracture toughness is negligible. Results also show that the LEFM approach to fracture is not tenable for design stresses where αc is often very small, far less than 2.5 （ KIC/σy）^2.     

Origin–destination table disaggregation using biproportional least squares estimation

This paper describes a group of techniques for disaggregating origin–destination tables for travel forecasting that makes explicit use of observed traffic on a network. Five models within the group are presented, each of which uses nonlinear least-squares estimation to obtain row and column factors for splitting trip totals from and to larger geographical areas into smaller ones. The techniques are philosophically similar to Fratar factoring, although the solution method is quite different. The techniques are tested on a full-sized network for Northfield, MN and are found to work effectively.     

Numerical implementation of meshless method for electromagnetic field governing equations

For electromagnetic governing equations formulated by magnetic vector potential and electric scalar potential, its detailed numerical implementation is achieved by using meshless method and Galerkin approach. And essential boundary and interface condition of electromagnetic field are imposed by means of Lagrange multiplier method. Furthermore, the influences of interpolation point number at essential boundary and interface on computational results are also discussed. Examples are given to validate the effects of meshless method and Lagrange multiplier approach for electromagnetic field.