跃龙门隧道多功能钢拱架安装机快速施工配套技术

隧道施工机械化是我国隧道施工的发展方向。相较于开挖、衬砌机械化的快速发展,钢拱架安装机械化水平存在不足,长期以来较多采用人工作业,施工人员多、劳动强度大、施工效率及安装精度低,同时存在很大的安全隐患。本文通过跃龙门隧道机械化配置配套应用,分析了钢拱架安装机在机械化快速施工体系中的关键作用,并详细介绍了XZGMT411多功能钢拱架安装机相关参数、施工操作要点及注意事项。多功能钢拱架安装机的使用大幅提高了隧道施工效率及施工质量,缩短了施工工期。     

信号交叉口行人二次过街下右转车通行能力与延误估计模型

在充分分析典型四相位交叉口行人二次过街设置前、后的行人流与右转车流冲突的前提下，以行人过街时间占有率和行人群到达分布作为分析指标，利用可插车间隙理论得出行人单向通行和双向通行条件下的右转车通行能力计算公式；根据行人流随机消散和集中消散的不同特征，应用随机分布理论推导出右转车穿越行人流的延误模型；并通过算例对比分析行人二次过街设置前、后右转车通行能力和延误的变化值。结果表明，除了在少数行人流量比较大的情况下， 行人二次过街的设置会小幅度减少右转车的延误；在其他大多数情况下，行人二次过街设置后， 右转车的通行能力将受到限制，延误增大，其中，平均通行能力降低了16.68%，平均延误时间增大 了21%，所以，当右转车交通需求较大时，需同时考虑行人和右转车的交通运行状态，优化设计是否采用行人二次过街，避免右转车超出极限忍耐时间而增大与行人冲突的概率。     

基于ABAQUS的港工结构计算模型自动地应力平衡方法研究*

初始地应力场是结构-地基相互作用下有限元分析重要的初始条件，其平衡结果的精度将直接影响结构数值分析结果的准确性。虽然自动地应力平衡法操作步骤最为简单、所得结果最优，但受地基或结构形式、地基土层参数及接触等复杂条件的严重制约，其在实际中的应用非常受限。利用ABAQUS软件，在严格遵守实际地应力平衡时间节点的基础上，采用设置生死单元的方式实现初始地应力平衡前、后地基-结构所在空间单元的置换，建立通用自动地应力平衡方法及步骤，并通过多个典型港工结构模型算例进行验证。结果表明，本文的自动地应力平衡方法及步骤简单、易行，且能够方便有效地实现各种复杂情况下港工结构计算模型的初始地应力平衡。     

铺缆船用电缆埋设犁土壤挖掘阻力计算

传统的计算埋设犁土壤挖掘阻力的方法一般采用经验公式计算。经验公式依赖丰富的试验数据，且只能适应特定形状和尺寸的埋设犁。由于埋设犁的形状和尺寸各不相同，基于经验公式计算土壤挖掘阻力的方法准确性不高。根据土力学基本原理，在力学分析的基础上，运用数学方法进行公式推导，得到用于计算不同形状尺寸埋设犁挖掘阻力的理论方法，解决依赖经验公式计算土壤挖掘阻力的局限性。     

频繁爆破下隧道内振动传播的数值研究

为揭示频繁爆破下隧道内振动传播衰减规律,文章以蒙华铁路段家坪隧道为工程背景,利用LS-DY NA建立了三维隧道模型,模拟分析了多次爆破下隧道内近区和中远区的振动传播规律。结果表明,质点垂向峰值振速随距离和爆破次数的增大而减小,少数振速有增大的现象;近区振动衰减较快,中远区振动衰减比近区缓慢;中远区a值比近区至少小12.5%,但整体上二者的a值随爆破作用次数的增加呈缓慢上升趋势;系数K随爆破作用次数的增加而降低,近区K值降低速率普遍大于中远区,且近区K值比中远区至少大29.1%;频繁爆破下,中远区比近区较符合萨道夫斯基经验公式。     

道路混凝土分层结构评价方法与指标研究(英文)

结合机理探寻、试验分析和对大量实体工程检测数据的提炼集成,系统研究了道路混凝土外分层与内分层结构,建立起混凝土分层结构模型及评价方法。建议采用密度变异性和吸水率变异性指标评价道路混凝土外分层和内分层结构,为工艺控制道路混凝土内、外分层奠定了基础。     

Reliability Modeling and Maintenance Policy Optimization for Deteriorating System Under Random Shock

Performance degradation and random shock are commonly regarded as two dependent competing risks for system failures. One method based on effective service age is proposed to jointly model the cumulative effect of random shock and system degradation, and the reliability model of degradation system under Nonhomogeneous Poisson processes (NHPP) shocks is derived. Under the assumption that preventive maintenance (PM) is imperfective and the corrective maintenance (CM) is minimal repair, one maintenance policy which combines PM and CM is presented. Moreover, the two decision variables, PM interval and the number of PMs before replacement, are determined by a multi-objective maintenance optimization method which simultaneously maximizes the system availability and minimizes the system long-run expect cost rate. Finally, the performance of the proposed maintenance optimization policy is demonstrated via a numerical example.     

Occupant injury risk analysis at NASS/CDS database

Injury information for vehicle occupants from the body regions of the head, thorax, abdomen, and upper and lower extremities, due to the restraints and interior parts of the vehicle, were extracted from the 2009 ~ 2012 NASS/CDS database. For those cases with high occurrence frequency, a detailed and comprehensive data analysis was performed to find the relationship between the accident, occupant, vehicle, and injury data. A numerical frontal impact sled model with the Hybrid III dummy and the GHBMC human body model was constructed to simulate and identify those injury risks according to NASS/CDS. Among the 5,734 injuries to the aforementioned body regions from frontal crashes are, listed by frequency of occurrence, the lower extremity (27.8 %), upper extremity (21.3 %), thorax (15.1 %), face (10.9 %), spine (8.7 %), head (7.3 %), and abdomen (6.9 %). The main injury sources to the head were the windshield, side structure, and steering wheel. For the thorax and abdomen they were the seat belt and steering wheel. For the lower extremity it was the instrument panel. The main injury patterns for the head were the concussion and the contusion. For the thorax they were vessel laceration and lung contusion. For the abdomen they were laceration and contusion of the organs. For the lower extremity they were bone fracture and ligament rupture. The steering wheel and seat positions were main factors affecting head and thorax injury risks. From the sled impact simulation, high injury risks of the head and thorax were assessed respectively at conditions of steering column tilt down and rear most seat position, which correlated well with the findings from the NASS/CDS data analysis.     

Approximate optimal AUTOSAR software components deploying approach for automotive E/E system

The AUTOSAR has been developed as the worldwide standard for automotive E/E software systems, making the electronic components of different suppliers to be employed universally. However, as the number of component-based applications in modern automotive embedded systems grows rapidly and the hardware topology becomes increasingly complex, deploying such large number of components in automotive distributed system in manual way is over-dependent on experience of engineers which in turn is time consuming. Furthermore, the resource limitation and scheduling analysis make the problems more complex for developers to find out an approximate optimal deploying approach in system integration. In this paper, we propose a novel method to deploy the AUTOSAR components onto ECUs with the following features. First, a clustering algorithm is designed for deploying components automatically within relatively low time complexity. Second, a fitness function is designed to balance the ECUs load. The goal of our approach is to minimize the communication cost over all the runnable entities while meeting all corresponding timing constraints and balancing all the ECUs load. The experiment results show that our approach is efficient and has well performance by comparing with other existing methods in specific and synthetic data set.     

“中—尼—印铁路通道”线路设计及建设可行性分析

随着我国"一带一路"倡议的推进,跨国运输通道的建设成为倡议实施的关键环节之一,而我国建设复杂地质条件下跨国基础设施的经验尚不丰富。"中—尼—印铁路通道"是一条途经尼泊尔,连接中国和印度2个大国的运输通道,基于实地考察,分析该通道建设的必要性及建成后的效益,对线路进行初步规划,并总结该通道建设的难点:铁路轨道坡度大;沿线区域地质构造复杂;周边基础设施落后,施工条件恶劣;大量深长隧道以及大跨径高桥梁;环境以及气候条件复杂。同时对沿线隧道以及桥梁的建设可行性进行分析,并给出施工建议:沿线隧道采用以TBM法为主、钻爆法为辅的施工方法;桥梁建设则因地制宜,根据不同区间的地质特点,采用相应的建设方法。