试谈城市轨道车辆及其国产化

介绍了城市轨道车辆的特点，分析了国产化的可行性，对城市舅道车辆国产化问题提出几点看法。     

复合材料螺栓连接结构数值模拟研究

在实际工程中,复合材料结构连接方式常采用机械连接形式(螺栓或铆钉)来连结复合材料构件和金属构件,而其中尤以螺栓连接更为常见.如何运用有限元软件模拟螺栓连接结构是仿真计算的关键.本文采用ANSYS软件,建立了复合材料螺栓连接结构的三维有限元模型,采用不同的边界处理方法对该结构进行数值模拟,得到复合材料螺栓孔处的载荷,并将数值计算结果与试验数据比较,探求出了该结构螺栓孔处载荷数值模拟方法.采用接触+耦合的边界处理方式不仅能较准确的模拟复合材料螺栓连接结构,而且计算时间远小于完全采用接触时的计算时间,大大提高了工作效率.     

船舶轴系用液压紧配螺栓连接结构的有限元分析

利用有限元软件ANSYS软件建立液压紧配螺栓三维有限元模型,考虑了预紧安装、工作、拆卸3种不同工况,计算得到3种工况下液压紧配螺栓关键部位的应力、变形情况,与理论值对比误差较小,验证了有限元方法及模型的正确性.     

一种基于小波去噪的脉冲噪声抑制方法

小波去噪是近年来兴起的信号处理领域中的高新技术,而目前许多研究方法都是以高斯噪声为背景的.在小波阈值去噪的基础上,将伪随机m序列引入小波去噪方法中,可有效去高斯噪声中掺杂的脉冲噪声.     

Creep Life Prediction of Alloy 718 for Automotive Engine Materials

This study was carried out to investigate the creep life at the high temperature of the Alloy 718 for automotive engine components using the initial strain parameter method (ISPM). Creep tests have performed at elevated temperatures in the range of 550 oC to 700 oC in this work. We also carried out constant stress creep tests. The initial strains were measured during 1 minute after loading. Both the creep stress and rupture time depend on the initial strain. We calculated the creep life of Alloy 718 by using the creep life prediction equations obtained from the ISPM. Then, we compared the creep life predicted by the ISPM to the Larson-Miller parameter (LMP). The experimental rupture time and the calculated rupture time by using the ISPM agreed with a confidence level of 95 %. The creep life predicted by using the ISPM was in very good agreement with the creep life predicted using the LMP method.     

文化中心地下交通枢纽工程钢管柱施工工法

新的钢管柱施工工法较传统的钢管桩施工工法具有精度高、成本低、施工周期短的优点。为保证天津市文化中心地下交通枢纽的施工质量,经过对其施工流程、施工方案和关键节点控制的介绍与论证,首次在地铁车站应用该工法,取得良好的效果,为在其他类似工程中的推广应用奠定了基础。     

Mathematical model validated by a crash test for studying the occupant’s kinematics and dynamics in a cars’ frontal collision

The aim of the paper was to determine the kinematic parameters that influence the occupant injury risk through a mathematical model. The developed model is a 2D model composed of 4 bodies (2 vehicles, thorax and head). The head and thorax are interconnected with a rotation joint and a torsion spring meant to stiffen the relative movement between the bodies. The thorax is connected with the vehicle body by a linear spring meant to simulate the seatbelt stiffness. The model was solved using Lagrange principle and the validation of the model was made through a crash test performed using the same initial conditions and comparing the obtained values of the displacement, velocity and acceleration parameters with the ones obtained with the mathematical model. The head and torso were chosen due to the fact that they are the common parts of the body that get injured, especially the head with the change of 80 % to cause fatal injury in car’s frontal collision. Once the model was validated, the stiffness of the seatbelt was modified in order to determine the behavior of the occupant in case of car frontal collisions. When the seatbelt stiffness was reduced, the occupant displacement and velocity increased, while by increasing the stiffness, these parameters decreased. The values of the developed model presented a high degree of similarity with the results obtained from the crash test with an error of 10 %. This model can be used by engineers to easily asses the occupant injury risk in case of vehicle frontal collisions.     

Flexural gravity wave generation by initial disturbances in the presence of current

The effect of uniform current on the generation of flexural gravity waves resulting from initial disturbances at a point was analyzed in two dimensions. The problem was formulated as an initial boundary value problem under the assumptions of the linearized theory of water waves. By direct application of the Laplace transform and then the Fourier transform, explicit expressions for the velocity potential and free surface elevation were obtained in integral forms; these were evaluated asymptotically for large distances and times by the application of the method of the stationary phase to obtain the far field behavior of the surface elevations in specific cases. Simple numerical computations were performed to illustrate the effect of uniform current on the surface elevation, wavelength, phase velocity, and group velocity of the flexural gravity waves and on the far field behavior of the progressive waves in two different cases, namely, when there is an initial depression concentrated at the origin and an initial impulse concentrated at the origin.     

基于径向基函数网络的社会消费品总额预测模型

利用BP、RBF神经网络自适应学习法模型,对社会消费品总额进行了预测和研究,结果表明用RBF网络自适应学习法所建立的模型经过训练后,可得到较精确的预测结果,并具有较强的应用性。     

铁路综合视频监控系统设计的用户需求研究

结合武汉铁路局京广北线综合视频监控系统工程设计,整理、归纳并对用户需求进行研究,仅供工程设计参考。