浅埋暗挖地铁隧道施工监测方法

文章以重庆市地铁一号线大坪车站临时施工便道为例,对在浅埋、软岩条件下既有隧道拆除采用工字钢支顶、风镐破岩,新建隧道采用台阶法环形开挖预留核心土、人工非爆破开挖的施工方法,通过现场监控量测,得出最大地表沉降仅为3.82mm,表明采用合理的施工方法可以减少地表沉降。     

我国海洋船舶污染防治法律制度的缺陷与对策

伴随我国经济和航运事业的快速发展,船舶营运造成了我国海洋环境的严重破坏,但我国防治船舶海洋污染法律制度的建设却严重滞后。在充分考量我国防治船舶海洋污染法律制度的现状的基础上,借鉴美国在相关法律制度建设上的立法经验,对我国防治船舶海洋污染法律制度的建设提出建议与对策。     

复合盾构刀具布置分析与研究

复合型盾构施工中,直接与岩土体接触的刀盘,其上刀具的布置是否合理直接影响盾构施工的顺利进行和施工成本。文章从复合盾构刀具布置的基本原则出发,指出了复合盾构滚刀刀间距的布置方式,利用等磨损原则分析了复合盾构刀具布置不同半径上每条轨迹应布置的刀具数量,阐述了不同刀具的螺旋曲线布置方法,并利用实例验证了利用该方法布置复合盾构刀具的合理性。     

基于规范方法的小水线面双体船疲劳强度研究

论文介绍了船舶结构疲劳强度评估基本原理,并对一条2200t级小水线面双体船进行规范法疲劳强度评估。针对小水线面双体船结构特点,采用规范进行疲劳载荷计算;结合全船有限元计算结果进行疲劳部位筛选;采用有限元法提取疲劳部位的热点应力,并计算疲劳部位的累积损伤度。分析计算结果,提出疲劳部位优化方案。     

Effect of Explosion in a Gas Pipeline Compartment of a Utility Tunnel on Neighboring Metro Tunnels北大核心CSCD

In this paper the numerical simulation analysis of the effect of explosion in the gas pipeline compartment of a utility tunnel on neighboring metro tunnels was conducted using the software AUTODYN. The results show that the TNT equivalent in a fireproof partition with length of 200 m is 41.6 kg when the gas concentration in the gas pipeline compartment reaches 10%; the blast wave has much effect on the crown and arch waist of the round metro tunnel and it’s necessary to take some protective measures in both areas; when the surrounding soil is sand, the utili- ty tunnel is above the round metro tunnel and their alignments are in the same direction, the greater the vertical spacing between the utility tunnel and the metro tunnel, the smaller the effect of the blast wave on the metro tunnel; when the vertical spacing is 7.2 m, the maximum dynamic tensile stress is 1.86 MPa (including the static stress value of 1 MPa in the tunnel segment) and it is slightly smaller than the designed tensile strength of metro tunnel (about 1.89 MPa). The maximum vibration velocity and the maximum displacement meet the structural stability require- ments, so it is suggested the vertical spacing between the utility tunnel and metro tunnel shall not be less than 7.2 m. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Isolating high-priority metro and feeder bus transfers using smart card data

Fixed-rail metro (or ‘subway’) infrastructure is generally unable to provide access to all parts of the city grid. Consequently, feeder bus lines are an integral component of urban mass transit systems. While passengers prefer a seamless transfer between these two distinct transportation services, each service’s operations are subject to a different set of factors that contribute to metro-bus transfer delay. Previous attempts to understand transfer delay were limited by the availability of tools to measure the time and cost associated with passengers’ transfer experience. This paper uses data from smart card systems, an emerging technology that automatically collects passenger trip data, to understand transfer delay. The primary objective of this study is to use smart card data to derive a reproducible methodology that isolates high priority transfer points between the metro system and its feeder-bus systems. The paper outlines a methodology to identify transfer transactions in the smart card dataset, estimate bus headways without the aid of geographic location information, estimate three components of the total transfer time (walking time, waiting time, and delay time), and isolate high-priority transfer pairs. The paper uses smart card data from Nanjing, China as a case study. The results isolate eight high priority metro-bus transfer pairs in the Nanjing metro system and finally, offers several targeted measures to improve transfer efficiency.     

基于模糊理论的船舶复合碰撞危险度计算

基于船舶领域和动界的概念,在船舶碰撞几何原理的基础上,利用模糊规则和模糊综合评价方法,本文提出一种船舶复合碰撞危险度的计算方法.确定最近会遇距离(DCPA)、最近会遇时间(TCPA)、两船距离、相对方位、船速比5个主要因素的隶属度函数,并考虑航行区域状况、能见度情况和船舶的操纵性能等对船舶碰撞危险度的隶属度函数修正.用原始数据对3种不同会遇态势进行仿真和对3种不同碰撞危险度计算结果分析比较,结果表明该方法的有效性.     

直升机舰上起降安全的影响因素研究

舰载直升机的起降安全涉及到舰机两方面,且影响因素较多。本文首先对舰载直升机起降安全因素进行了系统分析,梳理了其关键影响因素舰船空气流场中各特性参数对直升机操作性能的影响。然后介绍了用于舰船空气流场测量的三种典型方法,对舰船空气流场的深入研究有重要指导意义,并可为机舰动态配合研究提供参考。     

锌氧化银电池注液激活系统仿真模拟

利用ANSYS Fluent软件对锌氧化银一次电池注液激活系统进行模拟分析,在三种不同特性的点火器匹配注液激活系统条件下,模拟计算各个阀门能否正常开启、开启时间以及开启的顺序。分析计算得出各个阀门开启的时间,能够很好的指导注液系统设计。     

不同加筋形式对结构声辐射性能的影响

本文基于统计能量法分析了横向加筋板,纵向加筋板,斜加筋板,圆心在板角的圆弧形加筋板,圆心在板中轴的圆弧形加筋板,正交加筋板等六种不同加筋形式板在100Hz至1000Hz内的声辐射特性,研究表明正交加筋板的平均辐射声压级要低于另外五种形式的加筋板.研究了两类改变加强筋间距的横向加筋板的声辐射性能,研究表明对于固定左侧的一根加强筋改变加强筋间距,随着加强筋间距的增大,辐射声压级先增大后减小,而对于板中线为基准改变加强筋间距,对辐射声压级影响不大.最后,本文研究加筋板在主机舱中的实际应用,建立了三种主机舱模型,分析模型的声辐射特性,研究表明复合加筋形式的主机舱辐射声压级最小,相对于无加筋形式,要低4~5dB左右.