潜艇均衡系统自流注水调节阀稳态噪声试验研究

本文模拟建立了潜艇均衡系统自流注水试验系统,对不同假海压力、不同系统流量、不同出口背压及串联2台调节阀时自流注水稳定过程振动噪声进行研究。结果表明:潜艇均衡注水振动噪声随着假海深度的增大而增大;空气噪声随流量调节阀开度的增大而增大,在流量调节阀开度为60°-70°之间,振动加速度及水动力噪声产生峰值;在出口背压为0-0.5 MPa之间时,振动噪声值均大于无背压状态,峰值为0.2 MPa;串联2台流量调节阀可大幅降低自流注水振动噪声。     

“互联网+”环境下的道路交通信号辅助优化技术

在"互联网+"环境下,城市道路交通传统信号控制优化存在的技术瓶颈将得到有效突破。结合信号控制优化实际工作指出传统信号控制优化技术的瓶颈,分析"互联网+"技术辅助信号控制优化的解决思路及工作流程。重点探讨"互联网+"环境下的信号控制优化关键技术,例如主动发现问题、精准优化方案和客观量化评估优化效果等。其中针对方案优化还研究了利用"互联网+"数据校核交通模型以提高信号方案仿真精度。实践结果表明:利用"互联网+"技术可以有效辅助信号控制优化工作,提高信号控制方案与交通流的适配水平,有效缓解交通拥堵。     

基于下游大水位变率的下水式垂直升船机随动技术的设计与实现

下游航道水位变率大,快速适应水位变化的准确停位随动技术,对下水式升船机的传动控制很重要.本文介绍下水式垂直升船机随动控制技术.首先,对控制对象的特性进行分析,描述了系统的速度运行曲线,对位置控制功能进行了研究.然后,搭建试验平台对本控制方案的性能进行了测试,给出了测试的方法和试验结果.实验结果表明本控制系统具有定位精度高、响应速度快等优点,能够适应下游大水位变化率的下水式垂直升船机准确停位要求.     

A proposed vision and vehicle-to-infrastructure communication-based vehicle positioning approach

It is essential to obtain accurate location of vehicles for new applications of Intelligent Transportation Systems. To remedy the defects of present Global Positioning System and vehicle-to-infrastructure (V-I) positioning technology, a new positioning approach based on vision and V-I communication is proposed. This approach aims at lane-level positioning with lower cost than conventional ones. In this approach, the position of the vehicle is represented by its lateral position (the lane number) and longitudinal position (the distance from entrance of the road) in a course coordinate system along the road; the specific lane the vehicle is occupying (the lane number) can be judged using the information of lane lines detected by vision systems; then the distance to the vehicle is obtained by a Road Side Unit (RSU) during the V-I communication; and the longitudinal position is calculated. The error of the approach on typical operating conditions is analyzed, indicating that the new approach can achieve the accuracy of less than 0.31 m for straight road and 0.58 m for typical arc road with ultra-wideband communication and ranging technologies and rational arrangement of RSUs. The feasibility of this approach is presented.     

Approximate optimal AUTOSAR software components deploying approach for automotive E/E system

The AUTOSAR has been developed as the worldwide standard for automotive E/E software systems, making the electronic components of different suppliers to be employed universally. However, as the number of component-based applications in modern automotive embedded systems grows rapidly and the hardware topology becomes increasingly complex, deploying such large number of components in automotive distributed system in manual way is over-dependent on experience of engineers which in turn is time consuming. Furthermore, the resource limitation and scheduling analysis make the problems more complex for developers to find out an approximate optimal deploying approach in system integration. In this paper, we propose a novel method to deploy the AUTOSAR components onto ECUs with the following features. First, a clustering algorithm is designed for deploying components automatically within relatively low time complexity. Second, a fitness function is designed to balance the ECUs load. The goal of our approach is to minimize the communication cost over all the runnable entities while meeting all corresponding timing constraints and balancing all the ECUs load. The experiment results show that our approach is efficient and has well performance by comparing with other existing methods in specific and synthetic data set.     

某型号制导电子箱的检测系统设计*

为解决现有导弹检测设备存在的缺陷,设计了一种模块化、通用化、智能化和标准化的综合检测修理平台。论文介绍了系统的硬件组成以及基于Labwindows／CVI的软件开发。通过部队实践证明,该系统具有重大军事效益和经济效益和广泛的运用前景。     

Experimental and numerical investigations on vibration characteristics of a loaded ship model

In this paper, vibration characteristics of the structure in the finite fluid domain are analyzed using a coupled finite element method. The added mass matrix is calculated with finite element method (FEM) by 8-node acoustic fluid elements. Vibration characteristics of the structure in finite fluid domain are calculated combining structure FEM mass matrix. By writing the relevant programs, numerical analysis on vibration characteristics of a submerged cantilever rectangular plate in finite fluid domain and loaded ship model is performed. A modal identification experiment for the loaded ship model in air and in water is conducted and the experiment results verify the reliability of the numerical analysis. The numerical method can be used for further research on vibration characteristics and acoustic radiation problems of the structure in the finite fluid domain.     

藻菌共生体系对镇江市金山湖湖水的异位修复模拟研究

根据镇江市金山湖湖水的水质配制了模拟湖水,考察了小球藻、栅藻、铜绿微囊藻和聚球藻对模拟湖水中总氮(TN)、总磷(TP)和化学需氧量(COD)的去除效果,筛选出小球藻作为优势藻种.文中研究了小球藻的初始密度对模拟湖水中TN、TP和COD去除效果的影响.结果表明:小球藻初始密度为5×106个/m L时对TN、TP和COD的去除效果相对较好,在72 h内去除率分别可达55.1%,96.2%和55%.文中还对藻菌共生体系修复模拟湖水的效果进行了研究,确定了最佳藻菌体积比为1∶2时,TN,TP和COD的去除率分别达到62.4%,97.2%和96.2%.结果表明:藻菌共生体系可有效地对富营养化湖水进行异位修复.     

丛收藏看公交变迁

世上收藏五花八门,从古玩字画到票证钱币,从老式轿车到啤酒瓶盖,真是无奇不有.北京公交历年历月发行的月票印花和各种车票现也纳入了收藏之列.     

浅谈滚动物料计划在汽车行业中的应用

随着汽车逐年普及,消费者需求多样化、个性化随着增长,而且消费者对提车周期要求越来越高.汽车生产企业如何快速、高效的占领市场,同时降低供应链物流成本,是目前自主品牌汽车企业面临重大挑战.需要从软硬件进行全面提升竞争能力,物料组织改进是整个汽车供应链改进不可缺少的一个重要环节,能帮助企业迅速占领市场,以最小的成本换取最大利...