Injection Characteristics of Palm Methyl Ester Blended with Diesel Using Zuech’s Chamber

This research attempts to characterize the injection of palm biodiesel blended with diesel in a Zuech’s chamber. Thailand conventional diesel (mandated blend of biodiesel at 5 % or B5), palm biodiesel (B100) and four other biodiesel blends ratios (B20, B40, B60 and B80) were investigated with single hole injector of 140 and 200 μm diameters, injection pressure of 40 MPa to 160 MPa, constant back pressure of 4.5 MPa and energize time of 2.5 ms. The results show that increasing biodiesel blending ratios leads to longer injection delay, larger injection pressure drop, smaller injection quantity discharge coefficient (C_d) and shorter injection duration. With increasing biodiesel blending ratio, high Cavitation number from biodiesel viscosity decreases Reynolds number. Increasing injector diameter from 140 μm to 200 μm has reduced injection delay, increased fuel injection quantity, discharge coefficient and remaining injection duration. The increasing of injection pressure were improve, injection delay, injection duration, injection quantity and discharge coefficient until injection pressure 120 MPa. In addition at injection pressure over 120 MPa are decrease injection quantity and discharge coefficient, it effect form the cavitation phenomena. Increasing of viscosity, density, Bulk modulus and sound velocity were effect to increase injection delay, with reduce injection quantity, injection duration and pressure drop during injection process.     

Feature-Based Cad System Buildup for Passenger Airbag Design

The passenger airbag (PAB) requires a large volume and fast deployment because of the large distance between the dashboard and the passenger. And various shapes and sizes of the PAB are required depending on the type of vehicle. However, since the PAB modeling process for each design change is complicated and time consuming, the design parameters of the PAB could not be well investigated. In this study, a unique feature-based CAD system has been proposed that easily constructs PAB CAD model and then generates PAB FE model for collision analysis. Main keypoints and widths of PAB that determine the shape and size have been extracted by analyzing the geometric-feature of airbag. The PAB CAD model can be easily constructed by inputting keypoints and widths information. Then, from the constructed PAB CAD model, the PAB FE model is automatically generated. Finally, the generated PAB FE model can be directly employed for collision analysis, thereby reducing the modeling time of the PAB and enabling efficient parametric studies on design.     

Detection of Cognitive and Visual Distraction Using Radial Basis Probabilistic Neural Networks

This paper suggests a real-time method for detecting a driver’s cognitive and visual distraction using lateral driving performance measures. The algorithm adopts radial basis probabilistic neural networks (RBPNNs) to construct classification models. In this study, combinations of two driving performance data measures, including the standard deviation of lane position (SDLP) and steering wheel reversal rate (SRR), were considered as measures of distraction. Data for training and testing the RBPNN models were collected under simulated conditions in which fifteen participants drove on a highway. While driving, they were asked to complete auditory recall tasks or arrow search tasks to create cognitively or visually distracted driving periods. As a result, the best performing model could detect distraction with an average accuracy of 78.0 %, which is a relatively high accuracy in the human factors domain. The results demonstrated that the RBPNN model using SDLP and SRR could be an effective distraction detector with easy-to-obtain and inexpensive inputs.     

Effect of Hydrothermal Aging over a Commercial DOC on NO<Subscript>2</Subscript> Production and Subsequent SCR Efficiency

In this study, the effect of hydrothermal aging over a commercial diesel oxidation catalyst (DOC) on deterioration in nitrogen dioxide (NO₂) production activity has been experimentally investigated based on a micro-reactor DOC experiment. Through this experimental result, the NO₂ to nitrogen oxides (NOx) ratio at DOC outlet has been mathematically expressed as a function of DOC temperature according to various aging conditions. The current study reveals that the catalyst aging temperature is a more dominant factor than the aging duration in terms of the decrease in NO₂ production performance through DOC. The DOC sample hydrothermally aged for 25 h at 750 °C has displayed the lowest NO₂ to NOx ratio compared to the samples aged for 25 ~ 100 h at 650 °C. Also, in this study, the impact of hydrothermal aging of a DOC on the selective catalytic reduction (SCR) efficiency in a ‘DOC + SCR’ aftertreatment system was predicted by using transient SCR simulations. To validate the SCR simulation, this study has conducted a dynamometer test of a non-road heavy-duty diesel engine with employing a commercial ‘DOC + SCR’ system on the exhaust line. The current study has quantitatively estimated the effect of the variation in NO₂ to NOx ratio due to the hydrothermal aging of DOC on the NOx removal efficiency of SCR.     

New Optimal Power Management Strategy for Series Plug-In Hybrid Electric Vehicles

Recently Plug-in hybrid electric vehicles (PHEVs) have gained increasing attention due to their ability to reduce the fuel consumption and emissions. In this paper a new efficient power management strategy is proposed for a series PHEV. According to the battery state of charge (SOC) and vehicle power requirement, a new rule-based optimal power controller with four different operating modes is designed to improve the fuel economy of the vehicle. Furthermore, the teaching-learning based optimization (TLBO) method is employed to find the optimal engine power and battery power under the specified driving cycle while the fuel consumption is considered as the fitness function. In order to demonstrate the effectiveness of the proposed method, four different driving cycles with various numbers of driving distances for each driving cycle are selected for the simulation study. The performance of the proposed optimal power management strategy is compared with the rule-based power management method. The results verify that the proposed power management method could significantly improve the fuel economy of the series PHEV for different driving conditions.     

Wind pressure distribution and wind-induced dynamic response for spatial groined latticed vaults

The wind pressure distribution and wind-induced vibration responses of long-span spatial groined latticed vaults (SGLVs) were numerically simulated, which always are ones of the most important problems in the structural wind resistance design. Incompressible visco-fluid model was introduced, and the standard k-εtwo equation model and semi-implicit method for pressure linked equation (SIMPLE) were used to describe the flow turbulence. Furthermore, the structural dynamic equation was set up, which is solved by Newmark-β method. And several sort of wind-induced vibration coefficients such as the wind-induced vibration coefficient corresponding to the nodal displacement responses and wind loads were suggested. In the numerical simulation where the SGLV consisting of the cylindrical sectors with different curved surface was chosen as the example,the influence on the relative wind pressure distribution and structural wind-induced vibration responses of the closed or open SGLV caused by such parameters as the number of cylindrical sectors, structural curvature and the ratio of rise to span was investigated. Finally, some useful conclusions on the local wind pressure distribution on the structural surface and the wind-induced vibration coefficients of SGLV were developed.     

A data model applied to the knowledge-based ICAS

Image-guided computer aided surgery system (ICAS) contributes to safeness and success of surgery operations by means of displaying anatomical structures and showing correlative information to surgeons in the process of operation. Based on analysis of requirements for ICAS, a new concept of clinical knowledge-based ICAS was proposed. Designing a reasonable data structure model is essential for realizing this new concept. The traditional data structure is limited in expressing and reusing the clinical knowledge such as locating an anatomical object, topological relations of anatomical objects and correlative clinical attributes. A data structure model called mixed adjacency lists by octree-path-chain (MALOC) was outlined, which can combine patient's images with clinical knowledge, as well as efficiently locate the instrument and search the objects' information. The efficiency of data structures was analyzed and experimental results were given in comparison to other traditional data structures. The result of the nasal surgery experiment proves that MALOC is a proper model for clinical knowledge-based ICAS that has advantages in not only locating the operative instrument precisely but also proving surgeons with real-time operation-correlative information. It is shown that the clinical knowledge-based ICAS with MALOC model has advantages in terms of safety and success of surgical operations, and help in accurately locating the operative instrument and providing operation-correlative knowledge and information to surgeons in the process of operations.     

掺锶磷酸钙骨水泥的体外细胞生物学性能评价及其与掺锶量的相关性

目的 评价"SrHPO4/Ca4(PO4)2O/CaHPO4"系掺锶磷灰石骨水泥的生物相容性及其与掺锶量的关系.方法 通过急性全身毒性、热原性、溶血性、体外细胞毒性以及成骨细胞在材料表面的黏附、增殖与表达等实验,检测材料的性能及生物降解潜能.结果 "SrHPO4/Ca4(PO4)2O/CaHPO4"系掺锶磷灰石骨水泥的急性全身毒性、热原性、溶血性、体外细胞毒性均为合格.Sr-CPC的热原性、溶血性以及碱性磷酸酶值与掺锶量呈非线性关系.结论 含锶磷酸钙骨水泥体外细胞生物相容性良好,是安全的新型骨组织工程支架材料.     

Modeling research on manufacturing execution system based on large-scale system cybernetics

A cybernetics model of manufacturing execution system(MES CM) was proposed and studied from the viewpoint of cybernetics.Combining with the features of manufacturing system, the MES CM was modeled by"generalized modeling"method that is discussed in large-scale system theory.The mathematical model of MES CM was constructed by the generalized operator model, and the main characteristics of MES CM were analyzed.