复杂地质条件下锁扣钢管桩深水围堰施工

介绍锁扣钢管桩围堰与其他双壁钢围堰、钢板桩围堰的不同和各自适应条件;通过韩江特大桥锁扣钢管桩围堰施工实践,重点阐述了在复杂地质条件下,水中锁扣钢管桩围堰的加工、插打、合龙、堵漏、挖泥、封底等施工工艺,以期推广锁扣钢管桩围堰的应用。     

国内外经验对北京新机场线规划的启示

在研究总结国内外机场线运营模式及机场航站楼轨道交通车站特点的情况下,结合北京市新机场的选址和规模,提出北京市新机场线的运营模式和车站布置。在总结国际先进机场系统车站分布特征的基础上,阐述对北京新机场线的车站分布要求,最后提出结论和建议。     

城市轨道交通工程中转辙机安装方式简析

介绍城市轨道交通中各种转辙机的安装方式,并从多个方面分析比较了各种安装方式。     

CTCS-3级车载系统MVB接入设备的研究与实现

介绍CTCS-3级列车车载系统采用多功能车辆总线(MVB)进行通信的功能单元以及各个单元间的周期性和突发性通信行为。在对MVB总线协议以及上层应用协议进行分析的基础上,以MVB-Ethernet网关为例,详细介绍MVB通信网关的硬软件实现技术以及MVB网关设备在半实物仿真平台中的应用。     

重庆跨座式单轨1500V接触轨系统的安全管理

论述重庆跨座式单轨采用的直流1500V接触轨系统的构成、技术特征和在运营中的应用情况,介绍在采用直流1500V接触轨系统时的安全管理、安全防护措施。通过实践得出结论：在车辆段、地面正线等区域的使用中,尽管1500V接触轨系统比柔性架空网存在较高的触电风险,但如果运营公司高度重视,采取有效的隔离设计,以及强有力和细致的现场管理,就能够防范其带来的风险,确保运营安全。     

地铁系统联调与运营演练探讨

阐述地铁系统联调与运营演练的意义、前提条件、内容、参与各单位职责、计划编制原则及工作流程。说明机电设备系统联调及运营演练的重要性,既是地铁交通工程建设的客观要求,又是实现由建设向运营顺利过渡的必然过程,同时也是提高地铁工程建设水平、运营服务水平的社会需求,每个新开通的地铁都应该引起足够的重视。     

结合物业开发的地铁明挖区间设计

介绍杭州地铁1号线文化广场站-艮山门站明挖区间工程结合物业开发的设计方案,在地铁设计中应充分考虑预留物业开发条件,并提出对后期物业开发技术要求和建议。     

A simple formulation for predicting the ultimate strength of ships

The aim of this study is to derive a simple analytical formula for predicting the ultimate collapse strength of a single- and double-hull ship under a vertical bending moment, and also to characterize the accuracy and applicability for earlier approximate formulations. It is known that a ship hull will reach the overall collapse state if both collapse of the compression flange and yielding of the tension flange occur. Side shells in the vicinity of the compression and the tension flanges will often fail also, but the material around the final neutral axis will remain in the elastic state. Based on this observation, a credible distribution of longitudinal stresses around the hull section at the overall collapse state is assumed, and an explicit analytical equation for calculating the hull ultimate strength is obtained. A comparison between the derived formula and existing expressions is made for largescale box girder models, a one-third-scale frigate hull model, and full-scale ship hulls.List of symbols A _B total sectional area of outer bottom - A _B total sectional area of inner bottom - A _D total sectional area of deck - A _S half-sectional area of all sides (including longitudinal bulkheads and inner sides) - a _s sectional area of a longitudinal stiffener with effective plating - b breadth of plate between longitudinal stiffeners - D hull depth - D _B height of double bottom - E Young's modulus - g neutral axis position above the base line in the sagging condition or below the deck in the hogging condition - H depth of hull section in linear elastic state - I _s moment of inertia of a longitudinal stiffener with effective plating - l length of a longitudinal stiffener between transverse beams - M _E elastic bending moment - M _p fully plastic bending moment of hull section - M _u ultimate bending moment capacity of hull section - M _uh ,M _us ultimate bending moment in hogging or sagging conditions - r radius of gyration of a longitudinal stiffener with effective plating [=(I _s /a _s )^1/2] - t plate thickness - Z elastic section modulus at the compression flange - Z _B ,Z _D elastic section modulus at bottom or deck - slenderness ratio of plate between stiffeners [= (b/t)(_y/E)^1/2] - slenderness ratio of a longitudinal stiffener with effective plating [=(l/r)(_y/E)^1/2] - _y yield strength of the material - _yB , _yB , _yD yield strength of outer bottom, inner bottom - _yS deck, or side - _u ultimate buckling strength of the compression flange - _uB , _uB , _uD ultimate buckling strength of outer bottom - _uS inner bottom, deck, or side     

Performance indicators for transit management

Transit performance can be evaluated through quantitative indicators. As the provision of efficient and effective transit service are appropriate goals to be encouraged by federal and state governments, these goals are used to develop performance indicators.Three efficiency and four effectiveness indicators are described, together with two overall indicators. These nine indicators are analyzed for comparability utilizing operating and financial data collected from public transit agencies in California.Performance indicators selected for this study should not be viewed as final. Twenty-one performance indicators proposed by previous studies were reviewed. Theoretical considerations and unavailability or unreliability of data caused omission of several useful measures like passenger-miles. Circumstances such as improved data, emphasis upon goals other than efficiency and effectiveness, and local conditions might warrant the inclusion of indicators deleted from this research.This paper is based on work conducted for the Urban Mass Transportation Administration under University Research and Training Grant CA-11-0014, Development of Performance Indicators for Transit. The views expressed herein are those of the authors and not necessarily those of the University of California or the United States Government. We are indebted to John Feren for assistance with the statistical processing and data gathering.     

汽车系统单元化集成设计中相似性与复杂性

基于相似性科学和相似系统理论，研究了汽车系统中单元特征相似性分析方法，汽车系统相似性度量方法，相似单元设计和单元化系统集成设计中的相似性与差异性变化引起的复杂性。提出了以系统相似性度序列变化和差异性，集成设计系列化、多样化、个性化汽车产品系统新的理论方法。