车用电喷式汽油机9工况排放测试分析

按9工况法规对车用电喷式汽油机进行排放测量试验,对3种有害排气污染物(CO,HC,NOx)单工况和同类工况分担率进行了分析,得出各工况对整机排放的影响程度,并提出了改善该类汽油机排放水平的重点研究工况。     

一类面向多属性评价的广义聚合算子MAAO

多属性评价问题中不确定性、不精确性和非独立性导致的非可加性以及可鉴别性是评价中的难点问题.本文基于模糊测度和模糊积分提出一种广义的多属性聚合算子,给出了形式化表达、性质分析和多维描述.该算子能够聚合得到解决上述问题的综合评价结果,对于建立切合实际的定量化评估方法具有较好的现实意义.     

A proposal for cost-related and market-oriented train running charges

This paper examines some key aspects of a charging system for promoting railway transport, including charges reflecting a clear relationship with costs (transparency) and charges reflecting the quality of the infrastructure manager's service. Train running charges recover track-related costs and can help to develop a charging system that meets these requirements. To orient train running charges to the market, a method for processing track maintenance and renewal costs is proposed whereby the quality of the service provided by an infrastructure is measured according to its utility to the railway undertaking. To achieve transparency, a single indicator is used for cost planning and the subsequent levying of costs on railway undertakings. The paper includes an example of how proposed train running charges would be calculated according to data from 14 European countries. The example shows that short-distance trains generate the lowest maintenance and renewal costs, followed by long-distance trains and freight trains.     

Methodology for bus structure torsion stiffness and natural vibration frequency prediction based on a dimensional analysis approach

Engineering bus design requires testing of bus structures prototypes in order to guarantee a certain level of strength and an appropriate static and dynamic behavior of the bus superstructure when exposed to road loads. However, experimental testing of real bus structures is very expensive as it requires expensive resources and space. If testing is done on a scale bus model the previous required expenses are considerably reduced. Therefore, a novel methodology based on dimensional analysis applied to bus structure prediction to evaluate the bus structure static and dynamic performance is proposed. The static performance is evaluated attending to torsion stiffness and the dynamic in terms of the natural vibration frequencies and rollover threshold. A scale bus has been manufactured and dimensionless parameters have been defined in order to project the results obtained in the scale bus model to a larger model. Validation of the proposed methodology has been carried out under experimental and finite element analysis.     

黄陵县克山病病情现状

目的　观察克山病病情消长趋势 ,为防治和病情相关因素探索提供依据。方法　按“克山病监测”标准 (1 997年 )实施。结果　监测期内全县未见新发急 (亚急 )型克山病 ;监测点潜在型年新发生率 2 6 9/万 ;全县农业人群中慢型患病率 1 6 7/万 ,年新发现率 0 83/万 ,死亡率0 6 0 /万 ;在店头和腰坪两个重病乡镇 ,慢型年新发现率为 1 5 /万～ 1 8/万。结论　以急 (亚急 )型有无新发病及潜在型和慢型年新发生 (现患 )率为评估标准时 ,近 5年来黄陵县克山病病情稳定在 80年代中后期水平 ;慢型克山病是当前的防治重点。     

A method for solving the multi‐objective transit frequency optimization problem

Frequency setting takes place at the strategic and tactical planning stages of public transportation systems. The problem consists in determining the time interval between subsequent vehicles for a given set of lines, taking into account interests of users and operators. The result of this stage is considered as input at the operational level. In general, the problem faced by planners is how to distribute a given fleet of buses among a set of given lines. The corresponding decisions determine the frequency of each line, which impacts directly on the waiting time of the users and operator costs. In this work, we consider frequency setting as the problem of minimizing simultaneously users' total travel time and fleet size, which represents the interest of operators. There is a trade‐off between these two measures; therefore, we face a multi‐objective problem. We extend an existing single‐objective formulation to account explicitly for this trade‐off, and propose a Tabu Search solving method to handle efficiently this multi‐objective variant of the problem. The proposed methodology is then applied to a real medium‐sized problem instance, using data of Puerto Montt, Chile. We consider two data sets corresponding to morning‐peak and off‐peak periods. The results obtained show that the proposed methodology is able to improve the current solution in terms of total travel time and fleet size. In addition, the proposed method is able to efficiently suggest (in computational terms) different trade‐off solutions regarding the conflicting objectives of users and operators. Copyright © 2017 John Wiley & Sons, Ltd.     

Service quality,satisfaction and behavioral intentions towards public transport from the point of view of private vehicle users

Transportation - In order to attract car users towards the public transport services in an urban and metropolitan context, contributing to a sustainable mobility in cities, it is fundamental to...     

Upwelling mechanisms in the northwestern Alboran Sea

From April 1996 to July 1997, a series of hydrographic surveys were carried out in the Northwestern part of the Alboran Sea to investigate the upwelling that is an almost permanent feature in this area. Simultaneously a mooring line was deployed in the north part of the eastern section of the Strait of Gibraltar to monitor the variability of the Atlantic Jet (AJ). Two mechanisms are shown to be relevant for the upwelling dynamic in the region: the southward drifting of the AJ and wind stress. A linear relation between the angle under which the Jet enters the Alboran Sea and the distance from the coastline to the front associated with the Jet has been found. This angle that has been estimated from the low passed time series of current velocity measured by the uppermost instrument of the moored line has been then used to identify the onshore–offshore excursions of the Jet. Both upwelling mechanisms are identified from hydrographic data, because each of them has associated a different type of water mass, and they take place in different locations. Wind-driven upwelling dominates in coastal zones, on the shelf, while upwelling associated with southward drifting of the AJ prevails further offshore. The amount of sub-surface water brought up to the surface by each one is of the same order. However, wind-driven upwelling contributes to the fertilization of this region in a major extent because water upwelled by wind is richer in nutrient concentration.     

Influence of the heavy fuel spill from the Prestige tanker wreckage in the overlying seawater column levels of copper, nickel and vanadium (NE Atlantic ocean)

The water column above the Prestige wreckage was sampled during two consecutive campaigns: Prestinaut (December 2002) two weeks after the tanker sunk and HidroPrestige0303 (March 2003) one month after the sealing of the main fuel leaks. Samples of the original cargo fuel and the emulsified fuel in the surface of the ocean were also collected. Analysis of the fuel indicated the release of 135 kg of Cu, 1700 kg of Ni and 5300 kg of V from the original fuel to the water column, remaining 35 kg of Cu, 3100 kg of Ni and 13,800 kg of V in the emulsified fuel. The metal partitioning between the water column and the emulsioned floating fuel, Cu > Ni ~ V, are in accordance with the stability index for the metal–nitrogen bond in metalloporphyrins. This release had an impact on dissolved trace metal concentrations in the water column. An increase on dissolved copper (2.8–4.7 nM) and nickel (2.2–8.0 nM) with respect to natural values (1–3 nM for Cu and 1.6–5 nM for Ni) was observed. Values for vanadium (28–35 nM) were in the range of pristine North Atlantic waters (30–36 nM). This contamination was especially observed in the upper water column (0–50 m), associated with the mixing of seawater with the fuel moving upwards, and in deep waters, where the residence time of fuel is higher. Future research in this field should focus on the environmental variables and the processes that control the release of contaminants from fuels for a better assessment of the contamination in oil-spill events.     

The impact of automated transit,pedestrian, and bicycling facilities on urban travel patterns

This article reports on an integrated modeling exercise, conducted on behalf of the US Federal Highway Administration, on the potential for frequent automated transit shuttles (‘community transit’), in conjunction with improvements to the walking and cycling environment, to overcome the last-mile problem of regional rail transit and thereby divert travelers away from car use. A set of interlocking investigations was undertaken, including development of urban visualizations, distribution of a home-based survey supporting a stated-preference model of mode choice, development of an agent-based model, and alignment of the mode-choice and agent-based models. The investigations were designed to produce best-case estimates of the impact of community transit and ancillary improvements in reducing car use. The models in combination suggested significant potential to divert drivers, especially in areas that were relatively transit-poor to begin with.