An analysis of decision-making processes in multicultural maritime scenarios

With three research studies recently carried out the pros and cons of multicultural, multilingual crews have given a 'second' food for thought:

• The Seafarers' International Research Centre (SIRC): 'Transnational Seafarer Communities' and the research, 'Finding a balance: companies, seafarers and family life', linked to this [1]. The latter presented in Maritime Policy & Management, no. 1, January-March 2003.
• The Swedish National Maritime Museum (SNMM): Isolde av Singapore [2]. This research and sociological documentation will be reviewed in a later issue of Maritime Policy & Management.
• Horck, J., 'A culturally mixed student body; the WMU experience in fostering future decision makers' [3].

There is a growing conviction among seafarers and persons working in the land-based sector of the maritime industry (including ex-seafarers) that staff onboard and on shore should be prepared to work with crews and groups whose members come from different countries and cultures and speak different languages. The problem, though, is which culture will have to surrender and which will dominate? Will a third culture become the norm for common survival? Perhaps to understand oneself and be knowledgeable about others is a better way to avoid eventual conflicts.

There are nearly no research findings on how a programme should comprise the aims of facilitating comprehension and appreciation of influences, from differences in cultural backgrounds, on group performance and decisions.

This paper reports on the research carried out on students in the Shipping Management and the Maritime Education and Training courses at World Maritime University (WMU). How do post-graduate students holding unlimited certificates of competency, as well as holders of university degrees with experience in the maritime industry and maritime administration, come to a consensus decision?

The findings in this research are discussed in balance with the results from both the SIRC and the SNMM research which is interesting because the results, in some significant issues, are not the same.

A phenomenographic approach has been used to find out that a multicultural group is not free from working problems. Can cultural differences, perhaps, be developed from an assumed hindrance into a catalyst for stimulating national appreciation and cooperation? Perhaps the opposite is true; it might be a bottleneck for improvements in safety as formulated in the STCW95 and the ISM Code.     

Lubricating performance of carbon nanotubes in internal combustion engines – engine test results for CNT enriched oil

The main purpose of this research is to reduce friction losses by adding carbon nanotubes to engine oil. Extremely favorable tribological properties of carbon nanotubes have been extensively studied on the microscopic scale and using tribometers, have not yet been verified in the engine. Enriching oil with nanotubes can lead to significant, exceeding 7 %, reduction in the motoring torque of the engine at low crankshaft rotational speed. The phenomena associated with the dispersion of carbon nanotubes in the engine are stated and discussed. It has been shown that the oil shear during normal operation of the engine can effectively improve the dispersion of nanotubes. At the same time the oil filtration system removes agglomerates of nanotubes very quickly.     

Simulation-based dynamic adjustments of prices and subsidies for transportation PPP projects based on stakeholders’ satisfaction

Transportation - Public–private partnership (PPP) has been well acknowledged by many as an innovative approach to the procurement of public projects. In their long-term concession periods,...     

Risk and reward in public transportation contracting

The workshop discusses and documents a number of countries’ experiences regarding risk and reward in the delivery of public transport and determines the way in which competitive pressures actually work (or not) to deliver efficient and effective services. Papers are grouped into three main themes, i.e., public versus private management; negotiated versus competitively tendered contracts; and measures to improve performance. This chapter begins with a brief overview of each of the eight papers. This is followed by a section that out the discussions that emanated from the papers. Finally, the main policy and research recommendations are presented.     

Potential of Real-Time Cylinder Pressure Analysis by Using Field Programmable Gate Arrays

In this paper, a Field Programmable Gate Array (FPGA) was used to implement a real-time cylinder pressure analysis. The goal of the project was to improve the accuracy of calculated heat release and center of combustion calculations to enhance the precision of engine control functions. Compared to today’s real-time pressure analysis systems, several additional physical effects were taken into account for this objective. The wall heat transfer was calculated based on the approach published by Hohenberg. A chemical equilibrium with six substances was assumed for the mixture composition and a real-time calculation method was developed. Furthermore, a two-zone model was adapted and implemented for this realtime analysis. The validation of the results and the rating of the improvement in precision were based on GT-SUITE simulation results as an offline reference tool. Compared to state-of-the-art analysis systems, it was possible to reduce the average error of the center of combustion position from 1.6° to 0.5° crank angle (CA) by taking the investigated effects into account. Moreover, it was possible to significantly reduce the time required for the calculation from one complete combustion cycle to 0.2°CA at an engine speed of 3,000 rpm by using a continuous calculation method on the FPGA. This led to an additional improvement of the ability to control the engine, especially under highly dynamic operation conditions.     

Implementation and validation of a three degrees of freedom steering-system model in a full vehicle model

This paper describes the coupling between a three degrees of freedom steering-system model and a multi-body truck model. The steering-system model includes the king-pin geometry to provide the correct feedback torque from the road to the steering-system. The steering-system model is combined with a validated tractor semi-trailer model. An instrumented tractor semi-trailer has been tested on a proving ground and the steering-wheel torque, pitman-arm angle, king-pin angles and drag-link force have been measured during steady-state cornering, a step steer input and a sinusoidal steering input. It is shown that the steering-system model is able to accurately predict the steering-wheel torque for all tests and the vehicle model is accurate for vehicle motions up to a frequency where the lateral acceleration gain is minimum. Even though the vehicle response is not accurate above this frequency, the steering-wheel torque is still represented accurately.     

Regulating CO2 emissions of transportation in Europe: A CGE-analysis using market-based instruments

This paper analyzes the use of market-based emission regulation instruments to address the carbon dioxide emissions of transportation. Simulations with a static multi-region computable general equilibrium model show that including transportation into the European emission trading system is superior to a closed emission trading system for transportation or a tax-based approach. Furthermore, we show that exempting transportation from emission regulation is the most favorable approach in terms of welfare. This counterintuitive result is due to a large tax-interaction effect caused by high pre-existing fuel taxes in the transport sector.     

Environmental impact assessment of sediment dumping in the southern Baltic Sea using meiofaunal indicators

An experimental sediment dumping was carried out in the southern part of the Mecklenburg Bight in June 2001. Foraminiferans and ostracods from superficial sandy sediment were studied in a time series from before dumping until March 2004 in order to assess changes in associations and recolonization patterns of both groups. Additionally, an area sampling covering the dumping site and its surroundings from 15.5 to 20.7 m water depth made it possible to compare associations inside and outside the dumping area as well as the water depth dependent distribution of foraminiferans and ostracods. Salinity values vary within the high alpha-mesohaline and low polyhaline range. The dominating species are Ammotium cassis (Foraminifera) and Sarsicytheridea bradii (Ostracoda). The diversity is low (Fisher alpha index from 0.4 to 3.2 for foraminiferans and 1.0 to 2.5 for ostracods), but higher within the dumping site samples. These higher values are explainable by input of allochthonous tests and valves representing additional species. After the sediment dumping it took two and a half years to re-establish the total foraminiferan association and the total foraminifer/ostracod ratio within the dumping site. Total foraminiferan abundance increases remarkably with water depth (mean 83 tests in 100 ml) driven by higher nutrient availability and more suitable salinity and temperature values within the zone of the oscillating halocline. The distribution of shallow water species such as Cribroelphidium excavatum, Eucythere argus and Hirschmannia viridis, within the transient water layer A. cassis, Nodulina dentaliniformis, S. bradii and Palmoconcha laevata and below Eggerella scabra indicate the depth position of the halocline. Water depth and sediment dumping influence are the main driving factors for the distribution of foraminifer and ostracod associations within the study area. However, a significant sedimentological difference between samples inside and outside the dumping area is not recognizable.