排序方式: 共有18条查询结果,搜索用时 15 毫秒
11.
12.
在试验研究基础上,对组合结构索塔中开孔板连接件的抗拔性能进行理论分析。组合索塔中连接件设计主要考虑抗拔性能。为避免剪坏纵向承重钢筋,需要采用薄板。设计了一批34个单孔薄开孔板连接件抗拔试验,通过反力架上方的穿心千斤顶顶升丝杠实现对连接件的拉拔作用,同时千斤顶的反作用也可以将反力架固定在混凝土基体之上。考察了板厚、开孔位置、钢筋在钢板孔中的相对位置、开孔直径、钢筋直径等参数对其抗拔性能的影响;通过对钢筋应变的检测,记录钢筋在薄开孔板连接件受力过程中的应力分布情况。总结薄开孔板连接件拔出过程和破坏形态规律,发现其表现为钢板破坏为主,钢筋在孔中位置对其承载力、刚度、延性等均有一定影响;得到了钢筋在连接件受力过程中的应力分布,发现钢筋在距中心7 cm的位置应力不超过50 MPa,推知并排放置的连接件之间互相影响很小。连接件初始及弹性加载阶段荷载-位移曲线特征研究表明,该连接件具有足够的初始刚度,为其工程应用提供了理论指导。最后,总结薄开孔板连接件受力机理,建立预测其抗拔承载力的计算公式,适用于开孔板连接件钢板部分的抗拔承载力,计算结果与试验符合良好。 相似文献
13.
14.
15.
提出同站台换乘车站的5种典型线路组合方案,结合重庆轨道交通线网规划的实际工程进行分析对比,认为双层四线车站的线路组合、单层四线车站到双层四线车站的线路组合,以其合理可行性和整体经济性,可作为同站台换乘车站线路组合的首选方案. 相似文献
16.
聂鑫路 《现代城市轨道交通》2013,(3):93-96
结合重庆轨道交通建设管理实际工作,从建设前期管理、建设过程管理以及控制保护区管理3个方面进行分析,归纳存在的主要问题并提出改进措施。最后,从城市轨道交通可持续发展的角度提出3点建议。 相似文献
17.
研究目的:为了确定纵断面线路参数取值对LIM列车运行舒适性和安全性的影响规律,基于首都机场线LIM地铁系统参数建立列车-线路三维耦合动力学模型,分析在纵断面线路参数和车速影响下,LIM地铁系统动力响应特性,拟合得到车体最大垂向加速度、轮轨最大垂向力、最大轮重减载率与竖曲线类型、竖曲线半径、列车行驶速度之间的关系公式。研究结论:(1)凹形竖曲线会增大列车垂向加速度和轮轨垂向力,减小轮重减载率;(2)凸形竖曲线会减小列车垂向加速度和轮轨垂向力,增大轮重减载率;(3)车体最大垂向加速度、轮轨最大垂向力、最大轮重减载率均与曲线半径的倒数相关;(4)车体最大垂向加速度、轮轨最大垂向力、最大轮重减载率均与车速的平方相关;(5)本研究成果可为LIM地铁系统纵断面线路参数优化提供理论依据。 相似文献
18.
[Objectives]Electromagnetic pulse can seriously affect and even destroy naval shipborne electronic information systems, weapons, equipment and so on. Due to the complexity of the antenna port load circuit, it is necessary to formulate a numerical method which can easily obtain the antenna load current. [Methods]The induced current of the terminal is obtained on the basis of the finite-difference time-domain (FDTD) and Holland model. According to the Thévenin equivalent circuit, the conductor is equivalent to the voltage source to realize decoupling between the conductor and load end, and the load circuit is solved using Simulink software.[Results]Compared with the traditional terminal model, this method is simple and feasible for high-order circuit processing. The effectiveness of the model is verified using non-linear elements and parallel capacitors and resistors as the load respectively. The results show that the calculation results of this method are consistent with those of the traditional methods. Finally, the antenna of the end-connected protect- or is calculated. The results show that the lead inductance caused by the installation of the protector is an important factor affecting the protection performance.[Conclusions]The method proposed in this paper can greatly reduce the simulation complexity of the coupling current of an antenna with a complex load, giving it useful reference value for the field of ship electromagnetic pulse protection design. © 2023 Editorial Department of Chinese Journal of Ship Research. All Rights Reserved. 相似文献