基于数据驱动的电动汽车动力电池SOC预测

为准确预测电动汽车动力电池的能耗,缓解驾驶者的里程焦虑,本文中提出一种基于数据驱动的电动汽车动力电池SOC预测模型.首先分析电动汽车能耗构成并提取能耗影响因素,接着基于某款电动出租车CAN总线采集的汽车运行数据,采用机器学习算法,提出基于温度分层的能耗模型,通过宏观数据与微观数据的融合减小误差,最后使用该模型对车载BM...     

正交异性组合桥面构造优化

正交异性组合桥面由于其较好的抗疲劳性能和静力承载能力、相对较轻的自重近年来在实际工程中得到较多应用。正交异性组合桥面通常由正交异性钢板和混凝土层组成,在加入混凝土层后结构刚度发生较大变化,若正交异性板仍采用传统正交异性钢桥面的构造形式将会造成不必要的钢材用量和焊接量增加。采用遗传算法,以单位面积造价最小为目标,结合现有规范考虑了构造约束和承载能力约束两类约束条件,采用两种应力控制方案,对不同桥面板跨度和混凝土厚度的正交异性组合桥面的构造进行优化。同时解决了构造改变导致荷载分配改变对承载能力分析造成的影响。优化结果表明,桥面跨度4.5m时,与未优化组合桥面相比,优化方案用钢量可降低1.7%~10.1%,焊接量可降低16.5%~31.8%。     

瞬态瑞雷波在地层勘探中的应用

根据瞬态瑞雷波的传播特性和测试原理,使用振动及动态信号采集分析系统采集分析了测试工点的瑞雷波信号,并得到了测试工点的地层分布情况和各层的物理特性.     

Virtual prototype simulation on underwater hydraulic impingement shovel

The virtual prototype technology is applied to the design of the hydraulic impingement shovel, which is to increase the reliability of the design. The work principle of hydraulic impingement shovel is expatiated, and its dynamic equations are established. The 3D model of virtual prototype is built by PRO/E. Then the couple between the mechanical body of prototype and the hydraulic system is completed by virtue of ADAMS. Finally, the simulation is made on the virtual prototype. The simulation results show that the design of underwater hydraulic impingement shovel is rational. The virtual prototype technology could lay sound foundation of successful manufacturing of physical prototype for the first time and offer highly effective and feasible means for the design and production of underwater equipments.     

Experimental study on the width of the turbulent area around bridge pier

At present, the method of calculating the turbulent flow width around the bridge pier is not given in the "Standard for Inland River Navigation" (GB50139-2004) in China, and the bridge designer usually increases the bridge span in order to ensure the navigation safety, which increases both of the structural design difficulty and the project investments. Therefore, it is extremely essential to give a research on the turbulent flow width around the bridge pier. Through the experiments of the fixed bed and the mobile bed, the factors influencing the turbulent flow width around the bridge pier have been analyzed, such as the approaching flow speed, the water depth, the angles between the bridge pier and the flow direction, the sizes of bridge pier, the shapes of the bridge pier, and the scouring around the bridge pier, etc. Through applying the dimension analytic method to the measured data, the formula of calculating the turbulent flow width around the bridge pier is then inferred.     

Using a SVM to evaluate damage to vibration isolators in an elastic raft system

Predicting damage to vibration isolators in a raft experiencing heavy shock loadings from explosions is an important task when designing a raft system. It is also vital to be able to research the vulnerability of heavily shocked floating rafts unreliable, especially when the allowable values The conventional approach to prediction has been or ultimate values of vibration isolators of supposedly uniform standard in a raft actually have differing and uncertain values due to defective workmanship. A new model for predicting damage to vibration isolators in a shocked floating raft system is presented in this paper. It is based on a support vector machine（SVM）, which uses Artificial Intelligence to characterize complicated nonlinear mapping between the impacting environment and damage to the vibration isolators. The effectiveness of the new method for predicting damage was illustrated by numerical simulations, and shown to be effective when relevant parameters of the model were chosen reasonably. The effect determining parameters, including kernel function and penalty factors, has on prediction results is also discussed. It can be concluded that the SVM will probably become a valid tool to study damage or vulnerability in a shocked raft system.     

A second order volume of fluid （VOF） scheme for numerical simulation of 2-D breaking waves

Among all environmental forces acting on ocean structures and marine vessels, those resulting from wave impacts are likely to yield the highest loads. Being highly nonlinear, transient and complex, a theoretical analysis of their impact would be impossible without numerical simulations. In this paper, a pressure-split two-stage numerical algorithm is proposed based on Volume Of Fluid (VOF) methodology. The algorithm is characterized by introduction of two pressures at each half and full cycle time step, and thus it is a second-order accurate algorithm in time. A simplified second-order Godunov-type solver is used for the continuity equations. The method is applied to simulation of breaking waves in a 2-D water tank, and a qualitative comparison with experimental photo observations is made. Quite consistent results are observed between simulations and experiments. Commercially available software and Boundary Integral Method (BIM) have also been used to simulate the same problem. The results from present code and BIM are in good agreement with respect to breaking location and timing, while the results obtained from the commercial software which is only first-order accurate in time has clearly showed a temporal and spatial lag, verifying the need to use a higher order numerical scheme.     

Zn(acac)2·H2O化学气相沉积产物的表征

以Zn(acac)2.H2O为前驱体,以硅片为基底,采用化学气相沉积法,在不同的催化剂条件下,分别制备了ZnO纳米棒、ZnO纳米钵以及C纳米管,并分别用SEM、TEM、EDS和XRD对各产物进行了表征。当催化剂为水溶性金纳米粒子时,制得ZnO纳米棒;当催化剂为Fe-Pt合金时,制得C纳米管;当不用催化剂时,制得ZnO纳米钵。     

用P-Y曲线法计算板桩结构

根据P-Y曲线法原理分别对沉入砂性土地基及粘性土地基的板桩码头进行了例题计算,并且与传统的m法进行了比较。     

长缨剑胆舒——中国船级社走过45年

无论世界怎么变化,一种传统的交流手段始终影响着人们的生活--那就是船舶和航运. 占地球表面积约71%的海洋将陆地分割,这就决定了各国之间的物质交流必须依靠海上交通.统计表明,国际贸易的90%的份额由海上船舶运输.而承担海上风险管理的公益性机构--船级社,则是船舶在浩瀚海洋安全航行的有力保障.