Efficient clustering and simulated annealing approach for circuit partitioning

Circuit net list bipartitioning using simulated annealing technique has been proposed in the paper. The method converges asymptotically and probabilistically to global optimization. The circuit net list is partitioned into two partitions such that the number of interconnections between the partitions is minimized. The proposed method begins with an innovative clustering technique to obtain a good initial solution. Results obtained show the versatility of the proposed method in solving non polynomial hard problems of circuit net list partitioning and show an improvement over those available in literature.     

Study on bending conditions of plate in coil box

In a coil box between the roughing and finishing stands on a hot strip mill, a problem has been encountered that the entry region of the plate touches the bending rolls and deforms. As a result, the defective coil occurs. The condition of plate bending, which forms a new deformation feature in coiling, is analyzed. In this paper, the authors focus on the research of the effects of coiling parameters, such as the thickness of plate, roll speed and feeding speed of plate in coil box, and on specific plate bending. A finite element method is developed to simulate this coiling process. Based on numerical simulation, the effects of the coiling parameters on the mechanics and deformation of the bending plate are obtained. Numerical simulation tests have verified the validity of the developed model.     

Comments on enhanced yoking proof protocols for radio frequency identification tags and tag groups

A radio frequency identification (RFID) yoking proof scheme can generate proofs of simultaneous presence of two tags in the range of a specified reader so that an off-line verifier can verify the proofs later. This proof has found several interesting applications. However, many existing RFID yoking schemes are vulnerable to replay attacks. To overcome the weaknesses, Cho et al. proposed a new RFID yoking proof protocol and a new grouping protocol. Unfortunately, Cho et al.’s schemes are still vulnerable to replay attacks. In this paper, in addition to demonstrating weaknesses, we further discuss the rationale behind these weaknesses to provide a guide line for designing secure RFID yoking schemes. Based on the guide line, we propose a new RFID yoking scheme and a new RFID grouping scheme. Performance evaluation shows that our scheme outperforms its counterparts.     

大跨刚架拱桥病害分析及加固研究

在对某座刚架拱桥进行安全检测的现场发现主拱大节点裂缝、横向联系梁破坏等病害。该文根据现场检测结果,分析了刚架拱桥常见病害形式及产生原因。采用BCI评价对该桥进行整体技术状况进行评定,并根据评定结果针对性地提出了对刚架拱桥加固的建议。其检测结果、建议加固措施对同类拱桥病害处理具有借鉴意义。     

高速铁路精密工程平面控制网复测方案

高速铁路由于运行速度快对铁路的平顺性要求很高,所以对铁路的控制测量相应地提出了很高的要求,与传统的测量方法、精度要求等存在一定的区别。该文主要介绍新建沪昆铁路客运专线精密工程平面控制网复测方案,可供同行参考。     

Application of the reverse 3D scanning method to evaluate the wear of forging tools divided on two selected areas

This study is focused on tools used in the industrial hot forging process of a front wheel forging (eventually–gear wheel) manufactured for the automotive industry. Four different variants were applied for the tools: 2 die inserts were coated with two different hybrid layers (GN + PVD type), i.e. AlCrTiN and AlCrTiSiN, one insert was only nitrided, and one was pad welded, to improve tool durability. The tool wear was analysed and represented by the material degradation on the working surface, based on the 3D scanning and the material growth of the periodically collected forgings. Additionally, the scanned tools were divided into two areas, in which it was found, based on the reliminary analysis, that various degradation mechanisms are predominant. Microstructural and hardness measurements of the analyzed tools were also performed. Based on the results, it was found that, in the central part of the die insert (area A), thermo-mechanical fatigue and wear occurred, while in the area of the bridge insert (area B), only abrasive wear could be observed. For these areas (A and B), the loss of material was determined separately. In area A for the inserts with hybrid layer GN+AlCrTiSiN and gas nitrided, an intensive increase of wear took place, which was not observed for the pad welded and GN+AlCrTiN layer insert, for which, together with the increase of the forging number, a proportional growth of the loss of material occurred. In area B the weakest results were obtained for the insert with GN+AlCrTiSiN layer, while wear of other die inserts grew similar and proportional.     

Finite element modeling of hydrostatic stress distribution in copper dual-damascene interconnects

Hydrostatic stresses of copper dual-damascene interconnects are calculated by a commercial finite element software in this paper. The analytical work is performed to examine the effects of different low-k (k is permittivity) dielectrics, barrier layer and aspect ratio of via on hydrostatic stress distribution in the copper interconnects. The results of calculation indicate that the hydrostatic stresses are highly non-uniform throughout the copper interconnects and the highest tensile hydrostatic stress exists on the top interface of lower level interconnect near via. Both the high coefficient of thermal expansion and the low elastic modulus of the low-k dielectrics and barrier layer can decrease the highest hydrostatic stress on the top interface, which can improve the reliability of the copper interconnects.     

集装箱场地起重机械的需求与现状

1.近年总的需求状况 集装箱码头场地起重机在经历了连续5年的增产以后,于1998年创造了最高纪录但随后产量下降,生产的弱势将延至2000年以后.这是国际集装箱化市场分析所得出的一个基本估计,发表在新近出版的<国际集装箱化2000年年鉴>上.     

Lightweight mixture faults detection method for gasoline engine using on-line trend analysis

Mixture faults detection is meaningful for gasoline engines because proper mixture is the basic prerequisite for healthy running of a combustion engine. Among existing methods for faults detection, the data-driven trend analysis technique is widely used due to the simplicity and efficiency in time-domain. The CUSUM (Cumulative Sum Of Errors) algorithm is good at real-time trend extraction, but it’s easy to be costly on the fuel trim signal during the engine in normal working conditions, which will increase battery energy consumption because engine failure is rarely occurs. Hence, the conventional treatment methods of artifacts in the CUSUM algorithm are modified by means of decay function and detection time analysis. The thresholds are tuned according to the characteristics of artifacts instead of residual variability, which leads to better results of trend extraction and less computation. Then, the revised CUSUM algorithm is used for monitoring the mixture abnormal behaviors, and the mixture faults can be detected in real time through analyzing the variation features of fuel trim signal. The lightweight faults detector using the advanced CUSUM algorithm (FD-A-CUSUM) is evaluated on the experimental data collected from a Ford engine. The validation results show that while engine works under normal conditions, the computation of FD-A-CUSUM has decreased by 72.79 % in comparison with the detection method using the original CUSUM algorithm (FD-O-CUSUM), and the false alarm ratio of FD-A-CUSUM is 3.37 %. Futhermore, the detection results of FD-A-CUSUM for two leakage faults have achieved 91.18 % test accuracy.     

车载网络信息传输系统故障诊断与排除

介绍了车载网络系统的特点和故障机理,并对常见车系车载网络系统故障进行分析,得出造成车载网络信息传输系统故障的原因有3种:汽车电源系统引起的故障、车载网络信息传输系统的链路故障及车载网络信息传输系统的节点故障.结合实例给出了各种故障的具体诊断与排除方法.