浙江海事:奏响助力复工复产“春耕曲”

阳春三月,暖意浓浓。伴随着机器作业的轰鸣声,浙江舟山舟岱跨海大桥3座通航孔桥共计16台桥面吊机全部吊装安放并相继投入使用,标志着舟岱跨海大桥将全线进入到通航孔桥桥面吊装的全面冲刺阶段。"今天有返工人员吗?""体温测量工作完成了吗?有无体温异常人员?"3月15日.     

A finite pointset method for the numerical simulation of free surface flow around a ship

In this paper, we present a Finite pointset method (FPM) for the numerical simulation of free surface flow around a ship in calm water. It is a Lagrangian and meshless particle scheme which is applied to the projection method for the incompressible governing equations. This requires the solution of Poisson problems in each time step, so a moving least squares (MLS) interpolants is used for the spatial derivatives in order to discretize the Poisson equation with pressure-Dirichlet condition of free surface flow in meshless structure. Meanwhile, an additional problem of the periodic particle locations redistribution in the present approach is still handled by MLS interpolants. With the proposed FPM technique, problems associated with the free surface flow around a ship are circumvented. A verification of numerical modeling is made using the Wigley hull and the validity of the proposed methodology is examined by comparing the detail of wave profile and wave-making resistance with Series 60 model. The results demonstrate that FPM is able to perform efficient and stable simulations of free surface flow around a ship.     

海洋核动力平台电力系统设计概要

中国正在进行的海洋核动力平台国家示范工程项目,其电力系统设计存在着新的问题。本文以海洋核动力平台的需求为立足点,充分兼顾核电站的设计要求以及船舶入级的要求,归纳了适用于海洋核动力平台电力系统设计的要点,对海洋核动力平台的工程设计和新标准规范的制定具有较强的参考意义。     

一种基于动态分析的突变和异常波动预警方法

针对模拟量的突变和异常波动预警,给出一种基于动态分析的、可以应用于各种模拟量的统一预警方法,该方法已被应用于CSM-TH型集中监测程序和智能分析系统中,在多条线700余站现场运行的7年中,收到良好效果,得到用户认可。     

上软下硬地层盾构隧道围岩应力释放率研究

为解决盾构隧道在上软下硬地层中掘进时开挖面应力释放率难以确定的问题，基于一种既有的体积损失率迭代求解应力释放率的方法，依托广州地铁21号线盾构穿越上软下硬地层实际工程，通过数值模拟研究掌子面不同软硬岩比例、不同埋深条件下的应力释放率变化趋势，并结合现场实测资料进行对比分析。研究结果表明： 1）在盾构隧道掘进穿越上软下硬地层分界面的过程中，围岩的初次应力释放率范围基本保持在24%~36%，且随掌子面硬岩比例的增加呈线性增加趋势； 2）相对于围岩条件而言，埋深对应力释放率的影响更小。此外，在盾构隧道穿越上软下硬地层的全过程模拟中，根据围岩变化情况随不同开挖步动态调整应力释放率这一做法较全程取一固定应力释放率值更为合理。     

信号交叉口行人二次过街下右转车通行能力与延误估计模型

在充分分析典型四相位交叉口行人二次过街设置前、后的行人流与右转车流冲突的前提下，以行人过街时间占有率和行人群到达分布作为分析指标，利用可插车间隙理论得出行人单向通行和双向通行条件下的右转车通行能力计算公式；根据行人流随机消散和集中消散的不同特征，应用随机分布理论推导出右转车穿越行人流的延误模型；并通过算例对比分析行人二次过街设置前、后右转车通行能力和延误的变化值。结果表明，除了在少数行人流量比较大的情况下， 行人二次过街的设置会小幅度减少右转车的延误；在其他大多数情况下，行人二次过街设置后， 右转车的通行能力将受到限制，延误增大，其中，平均通行能力降低了16.68%，平均延误时间增大 了21%，所以，当右转车交通需求较大时，需同时考虑行人和右转车的交通运行状态，优化设计是否采用行人二次过街，避免右转车超出极限忍耐时间而增大与行人冲突的概率。     

进气掺氢与富氧燃烧对汽油机性能影响的试验研究

在JL3G10汽油机的基础上,搭建了发动机台架以进行掺氢富氧条件下的台架试验。利用该台架分别对不同进气含氧量(体积比),不同进气掺氢比以及富氧掺氢时汽油机的动力性与排放进行了试验研究。研究表明:相比原机,进气含氧量为25%时汽油机功率与扭矩提高了20.7%,HC排放减少36%,CO排放减少10.6%,但NOx排放增加了149.6%;2%进气掺氢比下的HC排放相比原机降低31.2%,CO排放降低46.1%,NOx排放则增加12.6%;富氧掺氢(氢氧体积比为2∶1)时,掺混比例为5.06%的汽油机较原机在动力性与排放上均有提升。     

Identity-based broadcast encryption with shorter transmissions

This paper describes two identity-based broadcast encryption(IBBE) schemes for mobile ad hoc networks.The first scheme proposed achieves sub-linear size cipertexts and the second scheme achieves O(1)-size ciphertexts.Furthermore, when the public keys are transmitted, the two schemes have short transmissions and achieve O(1) user storage cost, which are important for a mobile ad hoc network.Finally, the proposed schemes are provable security under the decision generalized bilinear Di?-Hellman(GBDH) assumption in the random oracles model.     

TNFα、Leptin-Rb、NF-κB和PPAR-γ在酒精性肝病大鼠肝细胞中的表达

目的 探讨TNFα、NF-κB、Leptin-Rb和PPAR-γ等在大鼠酒精性肝病中与肝组织炎症、坏死和纤维化的关系.方法 胃造瘘法建立长期大鼠酒精性肝病模型,分别在第4、8、12、24和52周用免疫组化、原位杂交和RT-PCR技术检测不同阶段大鼠肝组织中TNFα、NF-κB、PPAR-γ和Leptin-Rb等的表达.结果 TNFα、NF-κB和Leptin-Rb水平在模型组大鼠肝细胞中,第8周表达逐渐增强,第24周起高水平表达一直持续至52周(P<0.01).PPAR-γ在对照组和第4、8周模型组肝细胞中表达最强,第12周表达开始减弱.TNFα和NF-κB在肝细胞中的表达呈明显正相关关系,与PPAR-γ则呈负相关关系(P<0.01).结论 TNFα和NF-κB与肝细胞病变程度有很好的一致性关系,Leptin-Rb在肝细胞的表达与肝纤维化发展相一致,PPAR-γ则刚好相反.     

Simulation and analysis of vehicle stability based on ADAMS/CAR differential brake

To improve the braking safety of automobiles, the author studied the effect of differential brake on the stabilities. To analyze the mechanical characteristics of differential brake, automotive subsystem models were built by applying ADAMS/CAR, and automotive mechanics simulation model was built by setting the main subsystems such as body, engine and brake. The simulation model studied the distribution mode of three kinds of differential brake, and beeline braking stability and turning braking stability were simulated. It shows that differential brake can amend turning shortage of automobile brake and improve its braking stability, but the effect of automobile mass on its braking stability is great. So the distribution mode of braking force and the effect of mass change should be considered while differential brake is applied.