Oriented review to potential simulator for faults modeling in diesel engine

This paper presents a literature review on most of the faults and their models that are considered on a diesel engine. Several faults that may be produced on diesel engine have been analyzed, classified, modeled, and their influences on the global system have been shown. Thus, this paper aims to prepare an important data base on diesel engine faults which may help researchers to develop precise strategies on diesel engine fault diagnosis and prognosis, and also it helps in the development of diesel engine simulators aiming to study the behavior of the diesel engine in the presence of faults. Different fault models such as analytical, empirical, degradation models which may be represented as function of time or as function of the number of cycles, data driven models such as neural network models, or simply constant are presented and analyzed. The global overall models for diesel engine integrating faults are expressed. And finally, the use of these models with the most common failure density distribution functions is proposed giving a more realistic approach to our study.     

Advantages of twin rudder system with asymmetric wing section aside a propeller

This study presents a new twin rudder system with asymmetric wing section, aside a propeller, as a new category energy saving device (ESD) for ships. The energy saving principle of the new ESD, which is called “Gate rudder”, is described and its applicability on a large bulk carrier is explored using experimental and numerical methods. The study makes emphasis on the cost-effectiveness of the proposed ESD and presents a potential energy saving up to 7–8 % with the new device as well as an attractive return investment in 0.37–0.9 year. These estimations are based on the conventional powering methods, whereas the accuracy of the ESD design method is confirmed by model test measurements.     

Application of digital image correlation method to in-situ dynamic strain measurement

Application of digital image correlation (DIC) method to determination of in-situ dynamic strain is presented in this study. Firstly, an integrative software is programmed based on the DIC algorithms and point-wise least-squares fitting technique. Then, simulated speckle images are generated to study the computational accuracy of this software. The experimental setup and procedures for measuring in-situ dynamic strain through both DIC and strain gauge are proposed. The DIC results are close to those measured by strain gauge. This fact reveals that DIC is a practical and effective tool for in-situ dynamic strain measurement. Finally, the full-field in-situ dynamic strain of another specimen is measured by DIC, and the overall distribution of the strain in the measurement area is clearly shown.     

考虑移步需求的无桩型共享单车动态调度研究

共享单车系统自发的不均衡性导致单车数量分布与用户需求分布之间产生偏移，降低了系统服务能力，需要调度实现再平衡. 现有动态调度算法缺乏考虑起点车辆供给不足，用户在出行过程中“再次”取车的移步需求，难以准确识别用户真实的出行需求分布，降低了调度效果. 本文提出以用户出行选择行为为下层，以调度车辆路径规划为上层的双层规划模型框架，设计结合仿真系统的启发式求解算法. 算例场景基于上海市虹口、杨浦区共享单车历史出行数据搭建，并进行网格化处理. 算例结果表明，模型能有效识别移步需求，提高共享单车的供需匹配能力. 针对各类调度资源配置情况，共享单车的供需匹配率提升18.07%~ 19.89%，提高了共享单车系统的管理效率.     

基于下游大水位变率的下水式垂直升船机随动技术的设计与实现

下游航道水位变率大,快速适应水位变化的准确停位随动技术,对下水式升船机的传动控制很重要.本文介绍下水式垂直升船机随动控制技术.首先,对控制对象的特性进行分析,描述了系统的速度运行曲线,对位置控制功能进行了研究.然后,搭建试验平台对本控制方案的性能进行了测试,给出了测试的方法和试验结果.实验结果表明本控制系统具有定位精度高、响应速度快等优点,能够适应下游大水位变化率的下水式垂直升船机准确停位要求.     

CT reconstruction with priori MRI images through multi-group datasets expansion

Computed tomography (CT) reconstruction with a well-registered priori magnetic resonance imaging (MRI) image can improve reconstruction results with low-dose CT, because well-registered CT and MRI images have similar structures. However, in clinical settings, the CT image of patients does not always match the priori MRI image because of breathing and movement of patients during CT scanning. To improve the image quality in this case, multi-group datasets expansion is proposed in this paper. In our method, multi-group CT-MRI datasets are formed by expanding CT-MRI datasets. These expanded datasets can also be used by most existing CT-MRI algorithms and improve the reconstructed image quality when the CT image of a patient is not registered with the priori MRI image. In the experiments, we evaluate the performance of the algorithm by using multi-group CT-MRI datasets in several unregistered situations. Experiments show that when the CT and priori MRI images are not registered, the reconstruction results of using multi-group dataset expansion are better than those obtained without using the expansion.     

Seafarers’ perceptions of competency in risk assessment and management: an empirical study

Past analysis of accident investigations suggest an absence of or inadequate practices of risk assessment and management on board vessels. Although the International Management Code for the Safe Operation of Ships and for Pollution Prevention (ISM Code) requires that the risk management process must not only be correctly formulated and implemented but also be periodically evaluated in order to verify that these objectives are attained, the correct and effective implementation and application of the process cannot be achieved without active involvement of competent seafarers on board. Due to the limited investigation of seafarers’ competencies in risk management, the reasons for the inadequacies in the process that are leading to accidents were not evident. Hence, using a survey, this paper conducted a pilot study investigating seafarers’ perceptions of competency in the various components of the risk management process conducted on board vessels. The findings of this paper suggest an overall satisfaction with the risk assessment process. However, there is certainly room for improvement as far as seafarers’ performance is concerned. The findings of this paper provided valuable insights into the current training regimes in the area of risk assessment and management paving the way towards enhanced safety procedures on board vessels.     

Automatic outer surface extraction of femoral head in CT images

Computer-aided hip surgery planning and implant design applications require accurate segmentation of femoral head and proximal acetabulum. An accurate outer surface extraction of femoral head using marching cubes algorithm remains challenging due to deformed shapes and extremely narrow inter-bone regions. In this paper, we present an automatic and fast approach for segmentation of femoral head and proximal acetabulum which leads to accurate and compact representation of femoral head using marching cubes algorithm. At first, valley-emphasized images are constructed from original images so that valleys stand out in high relief. Otsu’s multiple thresholding technique is applied to seperate the images into bone and non-bone classes. Region growing method and threedimensional (3D) morphological operations are performed to fill holes in the bone. In the reclassification process, the bone regions are further segmented, and the boundaries of the bone regions are further refined based on Bayes decision rule. Finally, marching cubes algorithm is applied to reconstruct a 3D model and extract the outer surface of femoral head and proximal acetabulum. Experimental results show that this method is an accurate segmentation technique for femoral head and proximal acetabulum and it can be applied as a tool in medical practice.     

Comparison on travel scheduling between driving and walking trips by habitual car users

Research on walking behavior has become increasingly more important in the field of transportation in the past decades. However, the study of the factors influencing the scheduling decisions related to walking trips and the exploration of the differences between travel modes has not been conducted yet. This paper presents a comparison of the scheduling and rescheduling decisions associated with car driving trips and walking trips by habitual car users using a data set collected in Valencia (Spain) in 2010. Bivariate probit models with sample selection are used to accommodate the influence of pre-planning on the decision to execute a travel as pre-planned or not. The explicative variables considered are: socio-economic characteristics of respondents, travel characteristics, and facets of the activity executed at origin and at destination including the scheduling decisions associated with them. The results demonstrate that a significant correlation exists between the choices of pre-planning and rescheduling for both types of trips. Whether for car driving or walking trips, the scheduling decisions associated with the activity at origin and at destination are the most important explicative factors of the trip scheduling and rescheduling decisions. However, the rescheduling of trips is mainly influenced by modifications in the activity at destination. Some interesting differences arise regarding the rescheduling decision processes between travel modes: if pre-planned, walking trips are less likely to be modified than car driving trips, showing a more rigid rescheduling behavior.     

Hybrid process of fabricating high-quality micro wine-glass fused silica resonators

A new hybrid method, which combines improved glass-blown technology with wet etching, is reported to fabricate micro wine-glass resonators with high-quality fused silica. The optimum placement is compared to achieve the resonators with good shell shape. The typical shell diameter is about 4mm and its thickness covers from dozens to hundreds of micrometers. The etching rates in corrosion solutions with different ratios and at different thicknesses of hemispherical shells are studied. We also conclude how to precisely control the thickness. The corrosion solutions with different ratios of HF solution to NH₄F solution make the spherical shells rougher in different degrees. The best roughness is 0.581 nm in the 1: 8 ratio corrosion solution while the original roughness is 0.537 nm. This fact shows that the resonator remains atomically smooth surface. Based on the glassblowing spherical fused silica structure, the thickness of the resonator is effectively controlled by buffered oxide etch (BOE) technology according to the measured etching rate. The measured resonant frequency of the hemispherical shell at ambient pressure and room temperature is 1.75 kHz of rocking mode which is close to the simulated frequency. Using such a low-cost hybrid approach, we can fabricate high-quality microscale resonators in batch.