Tradeoffs among free-flow speed, capacity, cost, and environmental footprint in highway design

This paper investigates differentiated design standards as a source of capacity additions that are more affordable and have smaller aesthetic and environmental impacts than modern expressways. We consider several tradeoffs, including narrow versus wide lanes and shoulders on an expressway of a given total width, and high-speed expressway versus lower-speed arterial. We quantify the situations in which off-peak traffic is sufficiently great to make it worthwhile to spend more on construction, or to give up some capacity, in order to provide very high off-peak speeds even if peak speeds are limited by congestion. We also consider the implications of differing accident rates. The results support expanding the range of highway designs that are considered when adding capacity to ameliorate urban road congestion.     

Vulnerability analysis for large-scale and congested road networks with demand uncertainty

To assess the vulnerability of congested road networks, the commonly used full network scan approach is to evaluate all possible scenarios of link closure using a form of traffic assignment. This approach can be computationally burdensome and may not be viable for identifying the most critical links in large-scale networks. In this study, an “impact area” vulnerability analysis approach is proposed to evaluate the consequences of a link closure within its impact area instead of the whole network. The proposed approach can significantly reduce the search space for determining the most critical links in large-scale networks. In addition, a new vulnerability index is introduced to examine properly the consequences of a link closure. The effects of demand uncertainty and heterogeneous travellers’ risk-taking behaviour are explicitly considered. Numerical results for two different road networks show that in practice the proposed approach is more efficient than traditional full scan approach for identifying the same set of critical links. Numerical results also demonstrate that both stochastic demand and travellers’ risk-taking behaviour have significant impacts on network vulnerability analysis, especially under high network congestion and large demand variations. Ignoring their impacts can underestimate the consequences of link closures and misidentify the most critical links.     

偏压连拱隧道施工方法研究

文章采川三维有限元数值模拟研究了偏压连拱隧道不同施工顺序下拱顶下沉、中墙稳定性及初期支护受力特征.研究结果表明,先开挖浅埋侧时,拱顶沉降较小,中墙在施工中的稳定安全系数较大、弯矩较小,初期支护受力较大;对于浅埋偏压连拱隧道,围岩变形及中墙在施工中的稳定性控制更为重要.所以,从有利于围岩变形、中墙稳定性控制以及中墙受力的角度出发,宜采用先开挖浅埋侧的施工方法.     

富水砂层中暗挖隧道施工沉降控制技术

富水砂层中暗挖隧道施工是地铁施工中的一大难点,常常因沉降过大而引发安全事故。在深圳地铁安-侨区间隧道工程中,通过洞内帷幕注浆、水平旋喷桩、地表井点降水等辅助措施做到了超前控制,在解决隧道开挖安全问题的同时有效地减少了沉降量;施工过程中严格执行了"管超前、短进尺、强支护、早封闭、勤量测"的方针,控制了时空效应,解决了富水砂层中暗挖隧道沉降过大的问题。文章重点分析了沉降原因及控制沉降的关键技术和有效措施。     

光面爆破技术在城市地铁隧道施工中的应用

文章从光面爆破机理、光面爆破技术中各主要参数的确定,以及光面爆破在实际工程中的应用几个方面出发,以深圳地铁安-侨区间隧道硬岩段施工为例,研究分析了如何利用光面爆破技术来提高城市地铁浅埋暗挖法的光爆效果,特别是近距离穿越重要建(构)筑物时如何有效进行光面爆破。     

兰渝线新龙凤隧道涌水分析

文章结合兰渝线新龙凤隧道发生的岩溶涌水突泥地质灾害问题,在对隧道地质环境及岩溶发育特征分析研究的基础上,从隧道所处地段的岩溶发育强度、岩溶水动力垂直及横向分带,以及大气降雨条件等方面分析了隧道涌水的原因,认为新龙风隧道发生的涌水是揭露中小型岩溶管道所致,涌水的主要控制因素为大气降雨.     

高速公路ETC车道防邻道及跟车干扰研究

在ETC车道系统中,相邻两个ETC车道之间的OBU与RSU相互影响,RSU与非本车道上的OBU进行通讯并完成交易,引起邻道干扰;工程实施、设备等原因引起跟车干扰,造成ETC收费失败。针对存在的问题,分析工程安装、设备原因,提出切实可行的解决方案,保证ETC车道功能的正确性、完整性,是交通运输行业节能减排绿色发展成果之一。     

基于ANSYS的无缆潜航器力学性能分析研究

为了设计无缆潜航器,采用数值分析和机械制造相结合的方式,设计出一款新型无缆潜航器,在设计制造出潜航器的基础上,对该无缆潜航器进行力学性能分析研究,对其水下运动规律及特性进行了理论推导,采用数值分析的方法分别讨论机器人的结构力学特性和流体力学特性,并对机器人的应力应变强度参数进行仿真分析,讨论不同情况下机器人的属性参数,结合分析数据,对潜航器运行工况下的各项参数进行了稳定性分析,最后对以上所有参数进行总结归纳,文中所采用的方法可以用于机器人设计及优化。     

Analyzing urban bus service reliability at the stop, route, and network levels

Improving the reliability of bus service has the potential to increase the attractiveness of public transit to current and prospective riders. An understanding of service reliability is necessary to develop strategies that help transit agencies provide better services. However, few studies have been conducted analyzing bus reliability in the metropolis of China. This paper presents an in-depth analysis of service reliability based on bus operational characteristics in Beijing. Three performance parameters, punctuality index based on routes (PIR), deviation index based on stops (DIS), and evenness index based on stops (EIS), are proposed for the evaluation of bus service reliability. Reliability involves routes, stops, punctuality, deviation, and evenness. The relationship among the three parameters is discussed using a numerical example. Subsequently, through a sampling survey of bus lines in Beijing, service reliability at the stop, route, and network levels are estimated. The effects of route length, headway, the distance from the stop to the origin terminal, and the use of exclusive bus lanes are also analyzed. The results indicate low service reliability for buses in Beijing and a high correlation between service reliability and route length, headway, distance from the stop to the origin terminal, and the provision of exclusive bus lanes.     

我国船舶设计建造技术现状及展望

从船舶设计软件、船舶工程材料及建造的核心技术和高新技术3个方面回顾了我国船舶设计建造技术发展现状,结合当前计算机技术向造船行业的渗透带来的影响和我国当前船舶设计建造方面存在的共性问题,展望了船舶设计建造技术的发展趋势。