电镀锌技术在工业中的发展和应用

近年来,电镀锌技术在工业中的应用呈现出了良好的发展前景。为此,本文主要介绍了电镀锌技术在工业中的具体应用和机理,并对未来的发展做出了展望。     

大型升船机卷筒与主轴连接技术

大型升船机承载能力大,若卷筒与主轴仍采用常规连接形式很难满足要求。分析了卷筒与主轴的各种连接结构,针对景洪升船机开发一种新的连接技术,解决了加工和装配的工艺难题。通过理论计算确定结构尺寸,成功完成了16件大型卷筒装置的设计生产加工。     

X射线数字成像技术在长输管道中的应用

针对目前长输管道X射线胶片成像技术劳动强度大、效率低、成本高的缺点,开展了X射线数字成像技术的研究,通过研究以及现场试验确定了该技术在长输管道中应用的可行性。文中通过对该技术原理、现行标准以及现场工程实践应用的分析,表明X射线数字成像技术在长输管道环焊缝检测中结果直观、效率高、成本低。     

Vulnerability analysis for large-scale and congested road networks with demand uncertainty

To assess the vulnerability of congested road networks, the commonly used full network scan approach is to evaluate all possible scenarios of link closure using a form of traffic assignment. This approach can be computationally burdensome and may not be viable for identifying the most critical links in large-scale networks. In this study, an “impact area” vulnerability analysis approach is proposed to evaluate the consequences of a link closure within its impact area instead of the whole network. The proposed approach can significantly reduce the search space for determining the most critical links in large-scale networks. In addition, a new vulnerability index is introduced to examine properly the consequences of a link closure. The effects of demand uncertainty and heterogeneous travellers’ risk-taking behaviour are explicitly considered. Numerical results for two different road networks show that in practice the proposed approach is more efficient than traditional full scan approach for identifying the same set of critical links. Numerical results also demonstrate that both stochastic demand and travellers’ risk-taking behaviour have significant impacts on network vulnerability analysis, especially under high network congestion and large demand variations. Ignoring their impacts can underestimate the consequences of link closures and misidentify the most critical links.     

Superpave-13沥青混合料高温稳定性分析

文章结合天水过境高速公路路面实体工程,对不同孔隙率条件下的Super-pave-13高性能沥青混合料进行了车辙试验及SPT试验分析。结果表明,要保证Superpave-13沥青混合料具有较好的高温稳定性,其压实孔隙率应控制在4%～6.5%范围内。     

板裂围岩结构弯曲失稳分析

文章分析了板裂结构地质背景及板裂介质岩体特征,研究了板裂围岩破坏模式及力学机理,并结合工程实例,利用随机有限元模型对板裂结构屈曲破坏进行分析。     

广西高速公路声屏障降噪效果研究

文章结合实地监测结果,对广西高速公路沿线现有各类声屏障的降噪效果进行了分析评估,并提出了相应的高速公路声屏障设计思路及建议。     

Analyzing urban bus service reliability at the stop, route, and network levels

Improving the reliability of bus service has the potential to increase the attractiveness of public transit to current and prospective riders. An understanding of service reliability is necessary to develop strategies that help transit agencies provide better services. However, few studies have been conducted analyzing bus reliability in the metropolis of China. This paper presents an in-depth analysis of service reliability based on bus operational characteristics in Beijing. Three performance parameters, punctuality index based on routes (PIR), deviation index based on stops (DIS), and evenness index based on stops (EIS), are proposed for the evaluation of bus service reliability. Reliability involves routes, stops, punctuality, deviation, and evenness. The relationship among the three parameters is discussed using a numerical example. Subsequently, through a sampling survey of bus lines in Beijing, service reliability at the stop, route, and network levels are estimated. The effects of route length, headway, the distance from the stop to the origin terminal, and the use of exclusive bus lanes are also analyzed. The results indicate low service reliability for buses in Beijing and a high correlation between service reliability and route length, headway, distance from the stop to the origin terminal, and the provision of exclusive bus lanes.     

支撑式TBM与双护盾式TBM在设计选型中的比较

如何对硬岩隧道(洞)施工中使用的TBM进行设计选型?相信这是每个工程业主和设计院都需要面对的问题.通过对硬岩隧道(洞)掘进中,支撑式和双护盾式TBM的施工方法及设备功能包括对地质的适应性以及初期支护与混凝土衬砌型式、不良地质地段处理方法、出碴运输方式、环境影响等进行比较,并结合辽宁省大伙房输水一期工程输水隧洞施工中TBM的工程实践,提出了弥补支撑式TBM开挖和衬砌不能平行作业的改进构想,提出了采用栈桥式仰拱模板台车和全环内通式模板台车的施工方法.通过改进,可实现一模养生、一模浇注、第三模移动框架梁的作业工序.     

土基模量对沥青路面性能影响分析

从沥青路面结构层施工质量控制、半刚性基层反射裂缝扩展、路面疲劳寿命三个方面分析了土基模量对半刚性基层沥青路面性能的影响规律,提出了沥青路面土基模量的合理设计和施工控制措施。