浅析合肥市板桥河防洪工程设计

该文介绍了河道防洪工程水文模拟计算、防洪堤堤顶标高的确定、河道护砌保护的范围、防洪堤稳定安全的复核、河道蓄水构筑物的设置等。     

An Iterative Stabilized Scheme for Unsteady Incompressible Viscous Flow

An efficient iterative algorithm is presented for the numerical solution of viscous incompressible NavierStokes equations based on Taylor-Galerkin like split and pressure correction method in this paper. Taylor-Hood element is introduced to overcome the numerical difficulties arising from the fluid incompressibility. In order to confirm the properties of the algorithm, the numerical simulation on plane Poisseuille flow problem and liddriven cavity flow problem with different Reynolds numbers is presented. The numerical results indicate that the proposed iterative version can be effectively applied to the simulation of viscous incompressible flows. Moreover, the proposed iterative version has a better overall performance in maximum time step size allowed, under comparable convergence rate, stability and accuracy, than other tested versions in numerical solutions of the plane PoisseuiUe flow with different Reynolds numbers ranging from low to high viscosities.     

满足摩托车国Ⅲ排放几个关键性问题的研究

满足国Ⅲ排放标准是一个系统工程,需要将机内净化和机外净化结合起来。机内净化技术能减少机外净化压力,降低机外净化成本;机外净化主要围绕保持稳定的催化剂工作气氛条件而采用不同的技术方案。为达到国Ⅲ标准要求整车成本会增加,催化器作为满足国Ⅲ的关键零部件,可通过催化剂方案调整、载体结构等方面进行优选,协助主机企业以较低的催化剂成本满足国Ⅲ排放法规。     

基于AE的边坡稳定可拓评价开发研究

建立边坡稳定性评价可拓模型.基于AE开发平台,使用VB语言,开发了一个具有地图显示、数据录入、可拓计算和结果可视化显示等功能的系统,介绍了可拓物元模块的开发及实现过程.     

城市快速路建设先决条件分析

如何把握城市快速路的建设时机是众多发展中的大城市在构建面向未来的交通系统过程中正在面对或即将面对的问题.在中国城市交通发展模式转型和创新的背景下,探讨如何针对特定的时间、特定的城市正确决策快速路的建设.首先梳理国内外城市快速路的发展历程,分析快速路区别于一般城市道路的特征.提出将城镇化、机动化和区域化水平作为判定城市快...     

Dry sliding wear behavior of silver containing Ni-based composite-steel tribo-pair

Ni-based self lubricating composites containing four different amounts of silver were prepared by powder metallurgy (PM) route. The room temperature friction and wear behavior was investigated by carrying out dry sliding experiments against bearing steel using a ring-on-disk configuration. Tests were conducted at a constant load of 100N and different sliding speeds of 0.5, 1.0 and 1.5 m/s to analyze the effect of both the speed and the silver content on the wear behavior of the tribo-pair. The friction coefficient and the wear rate of the composites were found to decrease with increasing both the sliding speed and the silver content. The wear rate of the counterface was observed to be a little higher when it was siding against the composite having silver in comparison to that without any silver. However, the overall wear rate of the tribo-pair was found to decrease with increasing sliding speed and silver content.     

四室井筒式地下连续墙水平承载试验研究(英文)

井筒式地下连续墙基础因为存在土芯、墙体和外部土体的相互作用,其水平承载机理复杂。进行了3组不同尺寸的四室模型墙试验。基于模型墙内力和位移测试结果,研究了其水平承载特性。结果表明:不同截面尺寸和埋深的井筒式墙基础在不同水平荷载下的弯矩、剪力、转角、土抗力以及摩阻力分布形状相似;随着墙体截面尺寸和深度的增加,弯矩增大,墙体呈现刚体破坏特征;前墙外侧土抗力随荷载线性增加,成为土抗力的主要贡献部分。     

冲淤管道装置冲刷能力的研究

冲淤管道装置系统是修建于港池池底,主要适用于顺岸式码头泥沙处理的清淤系统。该装置的结构主要包括管道上顺次排布的喷嘴,冲淤管道,管路系统和动力设施。根据实验研究结果,着重探讨了该系统的基本组成部分即喷嘴的结构设计,管道最优参数选择,并着重对冲淤管道冲淤的可行性和冲淤能力进行分析,也对该冲淤管道装置的实际应用和布局进行介绍。池底冲淤管道装置系统的主要特点是充分利用河道本身运移能力进行清淤工作。该清淤技术可作为解决顺岸式码头港池和其它特定区域泥沙淤积问题的技术措施。     

大跨桥梁高桩承台深水基础施工技术

丹江口二桥是跨越南水北调工程——丹江口水库的一座特大桥,桥跨布置88.0m+150.0m+150.0m+88.0m,为预应力混凝土连续梁桥。桥墩基础为高桩承台,常年水位深达52.0m。2#墩桩长64m,桥面到桩底高度达到105.446m。该文介绍了该桥2#墩深水基础施工的主要过程。     

基于AMSAA模型的装备可靠性增长评估方法

根据装备在使用过程中的故障数据,运用AMSAA模型对装备的可靠性进行动态地评估和预测,形成一种基于AMSAA模型的可靠性增长评估方法。将该方法试用于某机载火控设备试验数据的分析评估,取得较好的效果。该方法值得进一步研究推广。