A proposed vision and vehicle-to-infrastructure communication-based vehicle positioning approach

It is essential to obtain accurate location of vehicles for new applications of Intelligent Transportation Systems. To remedy the defects of present Global Positioning System and vehicle-to-infrastructure (V-I) positioning technology, a new positioning approach based on vision and V-I communication is proposed. This approach aims at lane-level positioning with lower cost than conventional ones. In this approach, the position of the vehicle is represented by its lateral position (the lane number) and longitudinal position (the distance from entrance of the road) in a course coordinate system along the road; the specific lane the vehicle is occupying (the lane number) can be judged using the information of lane lines detected by vision systems; then the distance to the vehicle is obtained by a Road Side Unit (RSU) during the V-I communication; and the longitudinal position is calculated. The error of the approach on typical operating conditions is analyzed, indicating that the new approach can achieve the accuracy of less than 0.31 m for straight road and 0.58 m for typical arc road with ultra-wideband communication and ranging technologies and rational arrangement of RSUs. The feasibility of this approach is presented.     

Simulation of mixed gas formation for a spray-wall complex guided LPG direct injection engine

To obtain an ultralean air-fuel ratio and to reduce engine-out NOX and HC emissions induced by the richer mixture near the spark plug, a spray and wall complex guided combustion system has been developed by utilizing the fuel characteristics of LPG. The new combustion system configuration is optimized by using a commercial CFD code, FIRE V2013, and the reliability of the system has been experimentally demonstrated by Plane Laser-Induced Fluorescence (PLIF). The mixture formation in the new combustion system under part load (2,000 rpm) is numerically simulated. With an injection timing of 40°CA BTDC, the LPG spray which is injected from two upper holes, reaches the ignition point, and the other part of the LPG spray which is injected from the bottom hole, is directed to the ignition point through the vertical vortices at the same time. At the ignition timing of about 20°CA BTDC, the two-part mixtures have been shown to form a stable and richer stratified mixture around the ignition point, and the maximum global air-fuel ratio reaches to 60: 1.     

Approximate optimal AUTOSAR software components deploying approach for automotive E/E system

The AUTOSAR has been developed as the worldwide standard for automotive E/E software systems, making the electronic components of different suppliers to be employed universally. However, as the number of component-based applications in modern automotive embedded systems grows rapidly and the hardware topology becomes increasingly complex, deploying such large number of components in automotive distributed system in manual way is over-dependent on experience of engineers which in turn is time consuming. Furthermore, the resource limitation and scheduling analysis make the problems more complex for developers to find out an approximate optimal deploying approach in system integration. In this paper, we propose a novel method to deploy the AUTOSAR components onto ECUs with the following features. First, a clustering algorithm is designed for deploying components automatically within relatively low time complexity. Second, a fitness function is designed to balance the ECUs load. The goal of our approach is to minimize the communication cost over all the runnable entities while meeting all corresponding timing constraints and balancing all the ECUs load. The experiment results show that our approach is efficient and has well performance by comparing with other existing methods in specific and synthetic data set.     

基于地基回弹因素的盾构隧道管片上浮预测

针对软弱地层盾构隧道管片脱出盾尾后出现的上浮问题,分析盾构施工过程中管片上浮的诱因,得出软弱地层中管片的上浮主要是地层应力重分布产生的地基回弹力引起的。在此基础上建立隧道开挖动态模型,分析隧道上浮量变化规律以及地层特性对管片上浮量的影响规律,得出地层弹性模量和管片上浮量呈一定的指数关系,且弹性模量对管片上浮量的影响远大于地层黏聚力和内摩擦角。通过力平衡理论计算盾构开挖引起的地层回弹力、管片上浮量以及隧道上浮影响的地层高度范围,并通过对珠江狮子洋工程管片上浮量的计算与实测对比,证明该公式的合理性,为盾构隧道工程中考虑地基抗力引起的管片上浮量预测提供一种新的方法。     

大型活动交通影响评价方法

大型活动吸引和产生的突增交通量会造成周边地区的交通拥挤。通过比较大型活动与大型商业建设项目的交通影响评价特点和分析大型活动交通管理的影响因素,分别针对“提供一次性服务的大型活动”和“提供长效服务的大型活动”,设计了交通需求的预测方法。以交叉口服务水平分析方法为基础,提出一种了大型活动的交通影响评价方法。以长春市南岭体育场举办的“中国足球甲A联赛”为对象,运用Vissim微观交通仿真软件对所提出的方法进行了初步验证。结果表明,在大型活动条件下,所提出的方法能够确定需要进行交通管制的空间范围。     

新加坡公共交通发展经验及启示

通过实际考察和走访咨询,系统地总结了新加坡的公共交通发展经验。首先介绍了新加坡对小汽车和公共交通发展采取的＂推、拉策略＂,以及新加坡公共交通的发展历程。在此基础上,对新加坡公共交通发展的成功经验进行了归纳和总结,包括管理机制、公共交通设施建设、公共交通运营系统、政策法规等方面的内容。结合我国城市交通发展的现状和特点,对城市公共交通的发展提出了措施和建议。     

Apoptin原核表达载体的构建及在大肠杆菌中的表达

目的构建Apoptin的原核表达载体,并制备抗原物质Apoptin融合蛋白。方法在获得Apoptin融合基因的基础上,成功构建了Apoptin的高效原核表达载体pET-28a( )-Apoptin,将该质粒转化至大肠杆菌E.coliBL21(DE3)受体菌中,以IPTG对其进行诱导表达,聚丙烯酰胺凝胶电泳分析目的蛋白。结果转化有Apoptin的原核表达载体pET-28a( )-Apoptin的大肠杆菌E.coliBL21(DE3)经IPTG诱导后,经SDS-PAGE分析,在相对分子质量约17 000的位置出现目的蛋白条带,大小与Apoptin融合蛋白一致。结论Apoptin原核表达载体pET-28a( )-Apoptin能够表达出Apoptin融合蛋白,为进一步的Apoptin研究和制备Apoptin抗体奠定了基础。     

幽门螺杆菌尿素通道蛋白基因UreI载体的构建、融合表达及纯化

目的构建幽门螺杆菌(H.pylori,Hp)尿素通道蛋白基因UreI的融合表达载体,并在E.coliBL21中表达,为进一步研究UreI的功能奠定基础。方法利用分子克隆技术以Hp DNA染色体为模板,扩增Hp UreI基因片段,将目的基因UreI与载体pET32a( )分别经kpnⅠ和HindⅢ双酶切,纯化,连接。筛选阳性重组载体,转化大肠杆菌BL21,以IPTG诱导表达pET32a( )/UreI融合蛋白。表达产物经Ni-NTA琼脂糖树脂纯化后,用SDS-PAGE及Western blot分析。结果经酶切、测序分析表明,插入的基因片段为Hp UreI编码基因,由585 bp组成,与GenBank相应菌株HP AM417 609序列完全一致,无碱基突变。经SDS-PAGE分析显示重组质粒pET32a( )/UreI在原核细胞中得到了高效融合表达,其重组融合蛋白分子量为130 ku,经Ni-NTA琼脂糖树脂纯化后,其纯度达95%以上,Western blot分析显示,该重组融合蛋白可被6-His鼠抗单克隆抗体所识别,具有良好的反应原性。结论成功地克隆和构建了原核表达载体pET32a( )/UreI,并在原核细胞中得到了高效融合表达。     

一氧化氮合酶在胃食管反流病患者食道黏膜的表达

目的比较胃食管反流病(GERD)患者与健康对照者食管黏膜中一氧化氮合酶两种亚型(nNOS和iNOS)的表达情况。方法通过免疫组化法检测nNOS和iNOS在食管黏膜的分布和相对的蛋白定量,荧光定量PCR法检测其mRNA的含量。结果 nNOS和iNOS蛋白主要在食管黏膜上皮细胞胞质中表达,反流性食管炎(RE)患者明显高于非糜烂性反流病(NERD)和健康对照组(P<0.05),RE患者nNOS和iNOS的mRNA含量也明显高于NERD患者和健康对照组(P<0.05)。结论反流性食管炎患者食管黏膜中的nNOS、iNOS蛋白和mRNA含量增高,可能是一氧化氮参与胃食管反流病发生的分子机制之一。     

轴流式涡轮机动叶片的叶顶间隙对其气动性能影响

采用数值方法对不同叶顶间隙下某型号船用轴流式涡轮机的气动性能进行了对比分析.结果表明,叶顶间隙对喷嘴环前缘的压力分布和涡轮内的温度分布影响明显,过小和过大的叶顶间隙都会导致喷嘴环前缘高压力区的产生,并导致涡轮内局部高温度区域扩大;随着叶顶间隙的增大,喷嘴环后缘底部、吸力面及叶顶间隙内局部高熵区随之增大,燃气能量损失增大.